topic How To Config PBB Network in Extreme Switch in ExtremeSwitching (EXOS/Switch Engine)

How To Config PBB Network in Extreme Switch

Ko_Saw_Gyi — Fri, 07 Oct 2016 14:12:00 GMT

Hi All,
I would like to request, how to configure PBB in extreme XOS with cli. Please kindly help me.
BRs,
S.SBD

RE: How To Config PBB Network in Extreme Switch

Ron_Huygens — Fri, 07 Oct 2016 15:47:00 GMT

Bassically PBB is based in Exos on the VMAN functionality.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-VMAN-in-EXOS

You can find more on VMANs in the documentation:
http://documentation.extremenetworks.com/exos/EXOS_21_1/VMAN/c_vmans.shtml

RE: How To Config PBB Network in Extreme Switch

Ko_Saw_Gyi — Fri, 07 Oct 2016 16:12:00 GMT

Thanks a lot Ron Huygens

RE: How To Config PBB Network in Extreme Switch

Ko_Saw_Gyi — Sat, 08 Oct 2016 10:15:00 GMT

Hi Ron Huygens,

I tested that you said. When I capture with wireshark, I see only 802.1ad. I can't see 802.1ah in wireshark. I think I need some configuration. Pls help me.

Best Regards,

S.SBD

RE: How To Config PBB Network in Extreme Switch

Stephane_Grosj1 — Sat, 08 Oct 2016 13:16:00 GMT

Hi,

Sorry, but afaik there's no support of 802.1ah in EXOS.

RE: How To Config PBB Network in Extreme Switch

Ko_Saw_Gyi — Sat, 08 Oct 2016 14:28:00 GMT

Thanks!