topic Specify Snmp source interface for traps and logs in ExtremeSwitching (EXOS/Switch Engine)

Specify Snmp source interface for traps and logs

Gabriel_Poza — Thu, 05 Apr 2018 19:33:00 GMT

Hi

we have a pair of extreme BD8810 in which we use an inband for OAM vlan purposes. Some how after we did configure the snmp receivers the snmp traps are not getting to the NMS. I wonder if this is related to the fact that these are all being sent via the physical mgmnt interface which we are not using. If so, is there anyway to configure the sending of the traps via another interface (the inband one), which is the one used for ssh for example?

Thanks in advance.
BR
Gab

RE: Specify Snmp source interface for traps and logs

EtherMAN — Thu, 05 Apr 2018 19:44:00 GMT

You can define what ip and vr to send traps from when you set up trap receiver

configure snmp add trapreceiver x.x.x.x community (whatever) from x.x.x.x vr (vr where ip is)

RE: Specify Snmp source interface for traps and logs

Gabriel_Poza — Thu, 05 Apr 2018 20:08:00 GMT

Thanks a lot EtherMan, right to the point. will test this tomorrow.