topic Create a new ESI on a CER, 3 ethernet ports, any vlan in ExtremeSwitching (EXOS/Switch Engine) https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-new-esi-on-a-cer-3-ethernet-ports-any-vlan/m-p/42096#M9865 I am new to NetIron CER admin. I am trying to create an ESI on a CER, Version 5.2.0cT183 .<BR /> <BR /> I need to have 3 ethernet ports be on a separate ESI, just transparent and allowing any vlans, or all just untagged. Just needs to be separate ESI. Is this possible, how? <BR /> <BR /> I tried to add<BR /> esi MMC encapsulation cvlan<BR /> vlan 3101 name MMCWAN<BR /> !<BR /> interface ethernet 1/3<BR /> port-type customer-edge<BR /> port-name MMC ATT<BR /> enable<BR /> speed-duplex 1000-full<BR /> cluster-l2protocol-forward enable<BR /> !<BR /> interface ethernet 1/9<BR /> port-type customer-edge<BR /> port-name Charter QinQ clients<BR /> enable<BR /> speed-duplex 1000-full<BR /> spanning-tree root-protect<BR /> !<BR /> interface ethernet 1/10<BR /> port-type customer-edge<BR /> port-name Charter QinQ clients<BR /> enable<BR /> speed-duplex 1000-full<BR /> spanning-tree root-protect<BR /> ! Wed, 30 Jan 2019 06:04:00 GMT Stephen_Lisle 2019-01-30T06:04:00Z Create a new ESI on a CER, 3 ethernet ports, any vlan https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-new-esi-on-a-cer-3-ethernet-ports-any-vlan/m-p/42096#M9865 I am new to NetIron CER admin. I am trying to create an ESI on a CER, Version 5.2.0cT183 .<BR /> <BR /> I need to have 3 ethernet ports be on a separate ESI, just transparent and allowing any vlans, or all just untagged. Just needs to be separate ESI. Is this possible, how? <BR /> <BR /> I tried to add<BR /> esi MMC encapsulation cvlan<BR /> vlan 3101 name MMCWAN<BR /> !<BR /> interface ethernet 1/3<BR /> port-type customer-edge<BR /> port-name MMC ATT<BR /> enable<BR /> speed-duplex 1000-full<BR /> cluster-l2protocol-forward enable<BR /> !<BR /> interface ethernet 1/9<BR /> port-type customer-edge<BR /> port-name Charter QinQ clients<BR /> enable<BR /> speed-duplex 1000-full<BR /> spanning-tree root-protect<BR /> !<BR /> interface ethernet 1/10<BR /> port-type customer-edge<BR /> port-name Charter QinQ clients<BR /> enable<BR /> speed-duplex 1000-full<BR /> spanning-tree root-protect<BR /> ! Wed, 30 Jan 2019 06:04:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-new-esi-on-a-cer-3-ethernet-ports-any-vlan/m-p/42096#M9865 Stephen_Lisle 2019-01-30T06:04:00Z