topic RE: enable ssh without reboot in ExtremeSwitching (EXOS/Switch Engine)

enable ssh without reboot

EtherNation_Use — Wed, 08 Jan 2014 05:55:00 GMT

Create Date: Aug 26 2012 8:18PM

Hi All,

I've just upgraded our new switches to 15.1.3 and did not install the ssh mod before reboot.

It's now installed, is there a way to refresh the cli so we can start sshd or is it a full reboot so it sees the xmod installed?

(from luke_iggleden)

RE: enable ssh without reboot

EtherNation_Use — Wed, 08 Jan 2014 05:55:00 GMT

Create Date: Aug 27 2012 2:57AM

Hi,

try:
start process "exsshd"

--
Jarek (from Jaroslaw_Kasjaniuk)

RE: enable ssh without reboot

EtherNation_Use — Wed, 08 Jan 2014 05:55:00 GMT

Create Date: Aug 27 2012 4:07PM

Well, no idea about the effect of restarting the process recommended by above user.

If you pay attention to the cli once you install the SSH image - it will tell you that you need to restart "thttpd" and "snmpMaster"

(from Eugen_NAIMAN)

RE: enable ssh without reboot

EtherNation_Use — Wed, 08 Jan 2014 05:55:00 GMT

Create Date: Aug 27 2012 5:30PM

Slot-1 STACK.1 # run update
Slot-1 STACK.2 # sh proc exss
Card Process Name Version Restart State Start Time
------------------------------------------------------------------------------
Slot-1 exsshd 4.1.2.0 0 Ready Tue Aug 28 10:27:02 2012
Slot-2 exsshd 4.1.2.0 0 Ready Tue Aug 28 10:27:00 2012

Run update loaded the module, then enable ssh2 as per usual.

Thanks Guys. (from luke_iggleden)