topic create a 801.1q trunk on the fiber to connect the two switches in ExtremeSwitching (EXOS/Switch Engine) https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19294#M991 Hi Folks,<BR /> <BR /> I'm trying to setup a vlan between a pair of summit 200/48's. So far I've got the vlan configured on both ends, I've configured the ports on both ends, and I'm stuck on creating a 801.1q trunk.<BR /> <BR /> Can anyone point me in the right direction?<BR /> Fri, 21 Nov 2014 00:12:00 GMT Tourless 2014-11-21T00:12:00Z create a 801.1q trunk on the fiber to connect the two switches https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19294#M991 Hi Folks,<BR /> <BR /> I'm trying to setup a vlan between a pair of summit 200/48's. So far I've got the vlan configured on both ends, I've configured the ports on both ends, and I'm stuck on creating a 801.1q trunk.<BR /> <BR /> Can anyone point me in the right direction?<BR /> Fri, 21 Nov 2014 00:12:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19294#M991 Tourless 2014-11-21T00:12:00Z RE: create a 801.1q trunk on the fiber to connect the two switches https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19295#M992 Hello tourless. You need to configure the VLANs with a tag using the command configuration <VLAN name=""> tag <TAG number="">. Then add your up link port to each VLAN as a tagged port using the command configuration <VLAN name=""> add port tagged. Let me know if you need more help? P</VLAN></TAG></VLAN> Fri, 21 Nov 2014 00:17:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19295#M992 Paul_Russo 2014-11-21T00:17:00Z RE: create a 801.1q trunk on the fiber to connect the two switches https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19296#M993 Hi Paul, and thanks for the reply. I previously created the vlan and added a port as follows...<BR /> create vlan 3<BR /> config 3 tag 3<BR /> config 3 add port 12 tagged<BR /> config 3 ipaddress 10.0.0.1/24<BR /> <BR /> I did the same on both switches.<BR /> <BR /> Not sure if it matters but I probably mention this is for voice traffic... I'm trying to dedicate one port on each switch for a direct dial phone line that is being used as a fax.<BR /> Fri, 21 Nov 2014 00:51:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19296#M993 Tourless 2014-11-21T00:51:00Z RE: create a 801.1q trunk on the fiber to connect the two switches https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19297#M994 Hey Tourless it doesn't matter for VOIP so it looks great are there any other questions? P Fri, 21 Nov 2014 00:57:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19297#M994 Paul_Russo 2014-11-21T00:57:00Z RE: create a 801.1q trunk on the fiber to connect the two switches https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19298#M995 I'm not getting a dial tone through it... do I have to set static IP's on the ports on each end? such as 10.0.0.2 and 10.0.0.3 respectively?<BR /> I don't think it's VOIP... I think it's an analog line brought in from our cable provider... if that matters.<BR /> Fri, 21 Nov 2014 01:07:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19298#M995 Tourless 2014-11-21T01:07:00Z RE: create a 801.1q trunk on the fiber to connect the two switches https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19299#M996 well I just confirmed with my provided that from the jack on the modem to the phone it is converted to analog so I don't think this is going to work.<BR /> <BR /> Fri, 21 Nov 2014 04:27:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/create-a-801-1q-trunk-on-the-fiber-to-connect-the-two-switches/m-p/19299#M996 Tourless 2014-11-21T04:27:00Z