topic RE: cli different characters/symbols which is not readable. in ExtremeSwitching (EXOS/Switch Engine)

cli different characters/symbols which is not readable.

Resolut1on — Fri, 18 Aug 2017 07:34:00 GMT

cli different characters/symbols which is not readable.
Kindly help.Thanks

Vellachery__Sum — Fri, 18 Aug 2017 07:40:00 GMT

Gerald,

Can you please clarify your question in detail? sharing some snippets or error message which you are getting in the cli

Regards,
Sumeesh

Resolut1on — Fri, 18 Aug 2017 07:40:00 GMT

This is a switch xos, I will give you details and screenshots once I check it again maybe on Monday. I will just keep you posted. thanks for support

BradP — Fri, 18 Aug 2017 07:40:00 GMT

Check to make sure the serial settings are correct in your terminal emulator

Vellachery__Sum — Fri, 18 Aug 2017 07:40:00 GMT

Gerald,

As stated by my colleague (Brad) check for the serial settings.

Hope this KB Article might help you

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-console-into-Extreme-and-Enterasys-...

Regards,
Sumeesh

BrandonC — Fri, 18 Aug 2017 07:40:00 GMT

Like Brad said, I'd check the serial settings. It sounds like the baud rate may not be correct.