topic LACP between Enterasys S-Series and Extreme SummitX XOS16.1 in ExtremeSwitching (EXOS/Switch Engine)

LACP between Enterasys S-Series and Extreme SummitX XOS16.1

Jens_Podbiera — Thu, 09 Jul 2015 17:57:00 GMT

Hey Guys,

need a little bit assistance for a LACP (2 sfp+ ports) between the Enterasys S Series and a Extreme SummitX X670G2-48x-4q .

Found some example for Extreme:

enable sharing 10 grouping 10-12 lacp
configure sharing 10 lacp system-priority 3
configure sharing 10 add port 5

The Enterasys Side is no problem, but is that realy all what i have to do?
Admin Key? e.t.c?

regards

Jens

RE: LACP between Enterasys S-Series and Extreme SummitX XOS16.1

Bill_Stritzinge — Thu, 09 Jul 2015 17:59:00 GMT

Jens,

No ... it is simpler than that.. On the XOS side it is just one line...

enable sharing grouping lacp

So.. if you have port 1,2 on the xos side:

enable sharing 1 grouping 1,2 lacp

Bill

RE: LACP between Enterasys S-Series and Extreme SummitX XOS16.1

OscarK — Thu, 09 Jul 2015 18:00:00 GMT

Normally only the enable sharing command is enough to get lacp working.
To get proper distribution between the ports using a good load share algorithm is advised, preferably L3_L4. See this document.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-or-delete-a-share-group-in-EXOS

RE: LACP between Enterasys S-Series and Extreme SummitX XOS16.1

Jens_Podbiera — Thu, 09 Jul 2015 18:05:00 GMT

Wow, thank you for the fast response!
Thank You!

RE: LACP between Enterasys S-Series and Extreme SummitX XOS16.1

Jens_Podbiera — Thu, 09 Jul 2015 22:42:00 GMT

Hey Guys, works great, but this is my first Extreme Swtich and now i tryed to attach tagged Vlans to my lag Group.

Cant found the right Syntax. Should i add the tagged Vlan to the physical port or to the lag?

regards

Jens

RE: LACP between Enterasys S-Series and Extreme SummitX XOS16.1

Bill_Stritzinge — Thu, 09 Jul 2015 22:44:00 GMT

All you do is add the to the vlan in question....

Example... Add port 3 to vlan test... "configure test add port 3 tagged"

Assume you created the vlan test with tag ... Ex... "create vlan bill tag 10"

Bill

RE: LACP between Enterasys S-Series and Extreme SummitX XOS16.1

Jens_Podbiera — Thu, 09 Jul 2015 22:57:00 GMT

Awesome responsetime, thank you for this!

now all works great!