2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015

Ken_Thomas — Wed, 21 Oct 2015 19:27:00 GMT

Here are the new articles that were published last week
(October 11 - October 17 2015) in GTAC Knowledge:

Sunday, October 11, 2015:
none

Monday, October 12, 2015:
Downstream LACP LAG device ports are blocked when connected to MLAG switch ports
How to flash all port LEDs on an EXOS switch

Tuesday, October 13, 2015:
Purview Mirror port eth1 does not show any traffic received on it in VMWare environment
why do i get a loop after adding multilpe VLANs to one PVST+ domain
Large number of recvd pkt from IP addr 0.0.0.0 messages in NetSight syslog
Netsight Inventory Manager Reset Wizard does not set "reset at hh:mm [mm/dd] [reason]" values on Securestack
Unable to retrieve AP3610 trace log packages
Dragon: How do you perform an uninstall of a Network Sensor?

Wednesday, October 14, 2015:
Can I paint an Access Point for aesthetic reasons?
SecureStack reset on 6.61.13.0008 with Task bcmCNTR.0(0x3da4bc8)
Configuring Port Mirror on Securestack Causes Error Destination Port Not Correct
How to enable CoA (Change of Authorization)
OSPF state is stuck in Init
Does Meter function support on Open flow controller 1.3 ?
What are the Console Port settings for the Matrix X?
How do I upgrade the Matrix X?

Thursday, October 15, 2015:
configure ntp vr vr-name command is not working in Summit X440 series switches
Why are C25 TCP ports 20506 and 60606 showing up as open on a security scan?
What does the 'S' flag indicate in the show FDB output?
What is the reasoning for the second .img file for the AP4700?
entPhySensorValue always returns a value of 240
identiFi guest portal account has be recreated every day

Friday, October 16, 2015:
What are the Mirrored Flow Capacities of the IdentiFi Solution?
Compact Flash exhibiting signs of internal filesystem corruption
Reset with errors reporting SNMPTask(0xb87a030) and SNMPTask(0xb87a040)
What are the basic steps to upgrade a NAC appliance?
How to Configure Alarmtool to Send Events to a Server Using Syslog

Saturday, October 17, 2015:
none

RE: 2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015

Curtis_Parish1 — Fri, 23 Oct 2015 18:50:00 GMT

I submitted feedback on Netsight Inventory Manager Reset Wizard does not set "reset at hh:mm [mm/dd] [reason]" values on Securestack. I think there is a wording issue with the article because it makes it sound like Netsight assumes all SecureStacks do not support "reset at"

RE: 2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015

Drew_C — Fri, 23 Oct 2015 18:50:00 GMT

Hi Curtis, your feedback has been received and we're reviewing it internally. I've asked the team to come back and update the thread when work is completed. Thanks!

RE: 2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015

Curtis_Parish1 — Fri, 23 Oct 2015 18:50:00 GMT

Thanks. I think I know what the article is trying to say, but only because I have had it happen to me.

topic RE: 2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015 in ExtremeSwitching (Other)

2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015

RE: 2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015

RE: 2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015

RE: 2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015