https://community.extremenetworks.com/t5/extremeswitching-other/2016-08-29-new-gtac-knowledge-articles-august-21-27-2016/m-p/10281#M1309 Here are the new articles that were published August 21 - August 27 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, August 21, 2016:<BR /> none<BR /> <BR /> Monday, August 22, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-access-the-CLI-of-the-switch-that-is-manged-by-ExtremeCloud" target="_blank" rel="nofollow noreferrer noopener">How to access the CLI of the switch that is manged by ExtremeCloud</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-use-EXOS-and-IDM-to-see-end-systems-in-Netsight-without-NAC" target="_blank" rel="nofollow noreferrer noopener">How to use EXOS and IDM to see end-systems in Netsight without NAC</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/NAC-pre-registration-vs-self-registration" target="_blank" rel="nofollow noreferrer noopener">NAC - pre-registration vs self-registration</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-do-the-UL-DL-Dropped-Lost-Buffer-Retries-Mean" target="_blank" rel="nofollow noreferrer noopener">Defined, the UL Dropped Due to Rate Packets / Bytes, DL Dropped Due To Rate Packets/Bytes, DL Dropped Buffer Packets/Bytes, and DL Lost Retires Packets/Bytes from the Identify Gui -&gt; Reports-&gt; All Active clients report</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Controller-rebooted-on-10-11-firmware-when-Access-Points-are-approved-or-released-to-it-in-bulk" target="_blank" rel="nofollow noreferrer noopener">Controller rebooted on 10.11 firmware when Access Points are approved or released to it in bulk</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-controller-reboots-with-10-11-firmware-and-Sensor-core-file-is-found-in-Tech-Support-file" target="_blank" rel="nofollow noreferrer noopener">Wireless controller reboots with 10.11 firmware and Sensor core file is found in Tech Support file</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/C5210-controller-reboots-with-Watchdog-timeout-and-a-snmpsubagent-core-file" target="_blank" rel="nofollow noreferrer noopener">C5210 controller reboots with Watchdog timeout and a snmpsubagent core file in the Tech Support</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/how-to-configure-a-client-timeout" target="_blank" rel="nofollow noreferrer noopener">how to configure a client timeout on WM3000 series</A><BR /> <BR /> Tuesday, August 23, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-the-K-Series-Provide-Information-About-Power-Allocated-and-Power-available-via-SNMP" target="_blank" rel="nofollow noreferrer noopener">Can the K-Series Provide Information About Power Allocated and Power available via SNMP?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/WS-AP3825i-booting-to-boot-mode-when-a-long-untermintated-UTP-cable-is-plugged-into-the-console-port" target="_blank" rel="nofollow noreferrer noopener">WS-AP3825i booting to boot mode when a long untermintated UTP cable is plugged into the console port</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-bgp-ipv4-rib-in-routes-on-the-S-Series-Be-Increased" target="_blank" rel="nofollow noreferrer noopener">Can bgp-ipv4-rib-in-routes on the S-Series Be Increased?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-much-ipv6-routes-can-fit-in-hardware-on-bd8900-XL-blades-when-not-using-external-tcam" target="_blank" rel="nofollow noreferrer noopener">How much ipv6 routes can fit in hardware on bd8900-XL blades when not using external tcam</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-i-use-SFP-Module-on-X450G2-GE4-switches" target="_blank" rel="nofollow noreferrer noopener">Can i use SFP+ Module on X450G2-GE4 switches?</A><BR /> <BR /> Wednesday, August 24, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Configure-Policy-Based-Routing-on-an-XSR" target="_blank" rel="nofollow noreferrer noopener">How to Configure Policy Based Routing on an XSR</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Client-does-not-receive-a-DHCP-address-in-10-11-02-with-a-default-role-of-Deny" target="_blank" rel="nofollow noreferrer noopener">Client does not receive a DHCP address in 10.11.02 when Access Control is set to Deny</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-the-B5-C5-be-managed-by-a-routed-interface" target="_blank" rel="nofollow noreferrer noopener">Can the B5 / C5 be managed by a routed interface?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Date-and-time-is-not-maintained-after-rebooting-the-800-Series-switch" target="_blank" rel="nofollow noreferrer noopener">Date and time is not maintained after rebooting of the 800-Series switch</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-does-traffic-stop-passing-after-port-security-is-configured" target="_blank" rel="nofollow noreferrer noopener">Why does traffic stop passing after port security is configured</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Two-EXOS-switches-have-the-same-hardware-MAC-address" target="_blank" rel="nofollow noreferrer noopener">Two EXOS switches have the same hardware MAC address</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Securestack-switch-on-older-code-does-not-forward-ip-address-to-wireless-client" target="_blank" rel="nofollow noreferrer noopener">Securestack switch on older code does not forward ip address to wireless client</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-Access-Point-Flexview-no-longer-works-with-10-x-firmware-on-controller" target="_blank" rel="nofollow noreferrer noopener">Wireless Access Point Flexview no longer works with 10.x firmware on controller</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-are-XSR-NIM-Card-Interfaces-Numbered" target="_blank" rel="nofollow noreferrer noopener">How are XSR NIM Card Interfaces Numbered?</A><BR /> <BR /> Thursday, August 25, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Access-Points-are-not-forming-backup-tunnel-in-HA-pair" target="_blank" rel="nofollow noreferrer noopener">Access Points are not forming backup tunnel in HA pair</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-EXOS-platforms-support-egress-ACLs" target="_blank" rel="nofollow noreferrer noopener">What EXOS platforms support egress ACLs?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/S-series-Fw-for-new-deployment" target="_blank" rel="nofollow noreferrer noopener">How to upgrade FW using inventory manager</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-BGP-router-reflector-with-next-hop-self-for-iBGP-neighbor" target="_blank" rel="nofollow noreferrer noopener">How to configure a BGP router reflector with next-hop-self for iBGP neighbor?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-800-Series-swith-to-use-an-NTP-server" target="_blank" rel="nofollow noreferrer noopener">How to configure 800 Series swith to use an NTP server</A><BR /> <BR /> Friday, August 26, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-User-authentication-failing-at-NAC" target="_blank" rel="nofollow noreferrer noopener">Windows only devices failing to authenticate</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/I-Series-Industrial-Switch-Boot-up-issues-when-incorrect-console-cable-connected" target="_blank" rel="nofollow noreferrer noopener">I-Series Industrial Switch Boot up issues when incorrect console cable connected</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/OneView-No-data" target="_blank" rel="nofollow noreferrer noopener">OneView: No data in the User Sessions tab</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-End-Systems-disappear-periodically-from-NAC" target="_blank" rel="nofollow noreferrer noopener">NAC: End Systems disappear periodically from NAC</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Update-to-Firmware-8-42-01-0008-fails-on-bonded-Switch" target="_blank" rel="nofollow noreferrer noopener">Update to Firmware 8.42.xx fails with constant reboots</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Warn-DM-Warning-Error-11-writing-Node-Config-to-Flash-logs-seen-while-saving-configuartion" target="_blank" rel="nofollow noreferrer noopener"> Error -11 writing Node Config to Flash logs seen while saving configuartion</A><BR /> <BR /> Saturday, August 27, 2016:<BR /> none Thu, 01 Sep 2016 00:48:00 GMT Ken_Thomas 2016-09-01T00:48:00Z https://community.extremenetworks.com/t5/extremeswitching-other/2016-08-29-new-gtac-knowledge-articles-august-21-27-2016/m-p/10281#M1309 Here are the new articles that were published August 21 - August 27 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, August 21, 2016:<BR /> none<BR /> <BR /> Monday, August 22, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-access-the-CLI-of-the-switch-that-is-manged-by-ExtremeCloud" target="_blank" rel="nofollow noreferrer noopener">How to access the CLI of the switch that is manged by ExtremeCloud</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-use-EXOS-and-IDM-to-see-end-systems-in-Netsight-without-NAC" target="_blank" rel="nofollow noreferrer noopener">How to use EXOS and IDM to see end-systems in Netsight without NAC</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/NAC-pre-registration-vs-self-registration" target="_blank" rel="nofollow noreferrer noopener">NAC - pre-registration vs self-registration</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-do-the-UL-DL-Dropped-Lost-Buffer-Retries-Mean" target="_blank" rel="nofollow noreferrer noopener">Defined, the UL Dropped Due to Rate Packets / Bytes, DL Dropped Due To Rate Packets/Bytes, DL Dropped Buffer Packets/Bytes, and DL Lost Retires Packets/Bytes from the Identify Gui -&gt; Reports-&gt; All Active clients report</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Controller-rebooted-on-10-11-firmware-when-Access-Points-are-approved-or-released-to-it-in-bulk" target="_blank" rel="nofollow noreferrer noopener">Controller rebooted on 10.11 firmware when Access Points are approved or released to it in bulk</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-controller-reboots-with-10-11-firmware-and-Sensor-core-file-is-found-in-Tech-Support-file" target="_blank" rel="nofollow noreferrer noopener">Wireless controller reboots with 10.11 firmware and Sensor core file is found in Tech Support file</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/C5210-controller-reboots-with-Watchdog-timeout-and-a-snmpsubagent-core-file" target="_blank" rel="nofollow noreferrer noopener">C5210 controller reboots with Watchdog timeout and a snmpsubagent core file in the Tech Support</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/how-to-configure-a-client-timeout" target="_blank" rel="nofollow noreferrer noopener">how to configure a client timeout on WM3000 series</A><BR /> <BR /> Tuesday, August 23, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-the-K-Series-Provide-Information-About-Power-Allocated-and-Power-available-via-SNMP" target="_blank" rel="nofollow noreferrer noopener">Can the K-Series Provide Information About Power Allocated and Power available via SNMP?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/WS-AP3825i-booting-to-boot-mode-when-a-long-untermintated-UTP-cable-is-plugged-into-the-console-port" target="_blank" rel="nofollow noreferrer noopener">WS-AP3825i booting to boot mode when a long untermintated UTP cable is plugged into the console port</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-bgp-ipv4-rib-in-routes-on-the-S-Series-Be-Increased" target="_blank" rel="nofollow noreferrer noopener">Can bgp-ipv4-rib-in-routes on the S-Series Be Increased?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-much-ipv6-routes-can-fit-in-hardware-on-bd8900-XL-blades-when-not-using-external-tcam" target="_blank" rel="nofollow noreferrer noopener">How much ipv6 routes can fit in hardware on bd8900-XL blades when not using external tcam</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-i-use-SFP-Module-on-X450G2-GE4-switches" target="_blank" rel="nofollow noreferrer noopener">Can i use SFP+ Module on X450G2-GE4 switches?</A><BR /> <BR /> Wednesday, August 24, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Configure-Policy-Based-Routing-on-an-XSR" target="_blank" rel="nofollow noreferrer noopener">How to Configure Policy Based Routing on an XSR</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Client-does-not-receive-a-DHCP-address-in-10-11-02-with-a-default-role-of-Deny" target="_blank" rel="nofollow noreferrer noopener">Client does not receive a DHCP address in 10.11.02 when Access Control is set to Deny</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-the-B5-C5-be-managed-by-a-routed-interface" target="_blank" rel="nofollow noreferrer noopener">Can the B5 / C5 be managed by a routed interface?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Date-and-time-is-not-maintained-after-rebooting-the-800-Series-switch" target="_blank" rel="nofollow noreferrer noopener">Date and time is not maintained after rebooting of the 800-Series switch</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-does-traffic-stop-passing-after-port-security-is-configured" target="_blank" rel="nofollow noreferrer noopener">Why does traffic stop passing after port security is configured</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Two-EXOS-switches-have-the-same-hardware-MAC-address" target="_blank" rel="nofollow noreferrer noopener">Two EXOS switches have the same hardware MAC address</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Securestack-switch-on-older-code-does-not-forward-ip-address-to-wireless-client" target="_blank" rel="nofollow noreferrer noopener">Securestack switch on older code does not forward ip address to wireless client</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-Access-Point-Flexview-no-longer-works-with-10-x-firmware-on-controller" target="_blank" rel="nofollow noreferrer noopener">Wireless Access Point Flexview no longer works with 10.x firmware on controller</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-are-XSR-NIM-Card-Interfaces-Numbered" target="_blank" rel="nofollow noreferrer noopener">How are XSR NIM Card Interfaces Numbered?</A><BR /> <BR /> Thursday, August 25, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Access-Points-are-not-forming-backup-tunnel-in-HA-pair" target="_blank" rel="nofollow noreferrer noopener">Access Points are not forming backup tunnel in HA pair</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-EXOS-platforms-support-egress-ACLs" target="_blank" rel="nofollow noreferrer noopener">What EXOS platforms support egress ACLs?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/S-series-Fw-for-new-deployment" target="_blank" rel="nofollow noreferrer noopener">How to upgrade FW using inventory manager</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-BGP-router-reflector-with-next-hop-self-for-iBGP-neighbor" target="_blank" rel="nofollow noreferrer noopener">How to configure a BGP router reflector with next-hop-self for iBGP neighbor?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-800-Series-swith-to-use-an-NTP-server" target="_blank" rel="nofollow noreferrer noopener">How to configure 800 Series swith to use an NTP server</A><BR /> <BR /> Friday, August 26, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-User-authentication-failing-at-NAC" target="_blank" rel="nofollow noreferrer noopener">Windows only devices failing to authenticate</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/I-Series-Industrial-Switch-Boot-up-issues-when-incorrect-console-cable-connected" target="_blank" rel="nofollow noreferrer noopener">I-Series Industrial Switch Boot up issues when incorrect console cable connected</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/OneView-No-data" target="_blank" rel="nofollow noreferrer noopener">OneView: No data in the User Sessions tab</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-End-Systems-disappear-periodically-from-NAC" target="_blank" rel="nofollow noreferrer noopener">NAC: End Systems disappear periodically from NAC</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Update-to-Firmware-8-42-01-0008-fails-on-bonded-Switch" target="_blank" rel="nofollow noreferrer noopener">Update to Firmware 8.42.xx fails with constant reboots</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Warn-DM-Warning-Error-11-writing-Node-Config-to-Flash-logs-seen-while-saving-configuartion" target="_blank" rel="nofollow noreferrer noopener"> Error -11 writing Node Config to Flash logs seen while saving configuartion</A><BR /> <BR /> Saturday, August 27, 2016:<BR /> none Thu, 01 Sep 2016 00:48:00 GMT https://community.extremenetworks.com/t5/extremeswitching-other/2016-08-29-new-gtac-knowledge-articles-august-21-27-2016/m-p/10281#M1309 Ken_Thomas 2016-09-01T00:48:00Z