https://community.extremenetworks.com/t5/extremeswitching-other/2016-02-22-new-gtac-knowledge-articles-february-14-20-2016/m-p/10806#M1834 Here are the new articles that were published February 14 - February 20, 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, February 14, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/MLAG-FDB-Sync-Explained" target="_blank" rel="nofollow noreferrer noopener">MLAG FDB Sync Explained</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-802-11d-World-Mode-Standard-Supported-on-the-IdentiFi-Platform" target="_blank" rel="nofollow noreferrer noopener">Is 802.11d World Mode Standard Supported on the IdentiFi Platform</A><BR /> <BR /> Monday, February 15, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Syslog-messages-not-being-sent-during-bootup" target="_blank" rel="nofollow noreferrer noopener">Syslog messages not being sent during bootup</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/VRRP-Routed-Interface-see-2-Masters-on-S-Series-Core-Routers" target="_blank" rel="nofollow noreferrer noopener">VRRP Routed Interface see 2 Masters on S-Series Core Routers</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-do-I-configure-BootPRelay-on-EXOS-switches" target="_blank" rel="nofollow noreferrer noopener">How do I configure BootPRelay on EXOS switches</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IdentFi-wireless-appliance-rebooted-due-to-Power-Interruption" target="_blank" rel="nofollow noreferrer noopener">IdentFi wireless appliance rebooted due to Power Interruption</A><BR /> <BR /> Tuesday, February 16, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Error-A-route-received-from-BGP-could-not-be-processed-due-to-a-resource-failure" target="_blank" rel="nofollow noreferrer noopener">Error "A route received from BGP could not be processed due to a resource failure"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Ports-are-not-working-on-ReachNXT-100-8t" target="_blank" rel="nofollow noreferrer noopener">Ports are not working on ReachNXT 100-8t</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/SecureStack-Switch-Fails-During-Boot-and-Logs-error-message-12-READ-REG-ACK-ERRCODE-0x44" target="_blank" rel="nofollow noreferrer noopener">SecureStack Switch Fails During Boot and Logs error message "==12(READ_REG_ACK) ERRCODE=0x44"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-Appliance-Loses-Default-Gateway-After-a-Roboot" target="_blank" rel="nofollow noreferrer noopener">NAC Appliance Loses Default Gateway After a Roboot</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/siem-How-to-determine-average-event-payload-and-record-size" target="_blank" rel="nofollow noreferrer noopener">siem: How to determine average event payload and record size</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-included-with-a-NetSight-K12-license-NMS-K12" target="_blank" rel="nofollow noreferrer noopener">What is included with a NetSight K12 license, NMS-K12</A><BR /> <BR /> Wednesday, February 17, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Caveats-about-the-network-zone-attribute-in-an-ACL-policy" target="_blank" rel="nofollow noreferrer noopener">Caveats about the 'network zone' attribute in an ACL policy</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-clear-spantree-debug-counters" target="_blank" rel="nofollow noreferrer noopener">How to clear spantree debug counters</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/migration-from-N3-to-S3" target="_blank" rel="nofollow noreferrer noopener">Can the Same Config be Used for Migration from N-Series to S-Series?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/3825i-Kernel-panic-not-syncing-out-of-memory" target="_blank" rel="nofollow noreferrer noopener">3825i Kernel panic - not syncing: out of memory</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-Reset-with-1-DistServ-3-tDsBrdOk-serverWatchDog-5-Host-client-57-RtrLsnat-in-recv-for-6027-tics" target="_blank" rel="nofollow noreferrer noopener">S-Series : Reset with &lt;1&gt;DistServ[3.tDsBrdOk]serverWatchDog.5(Host), client 57(RtrLsnat) in recv for 6027 tics</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-Limit-for-number-of-ports-in-lag-between-7100" target="_blank" rel="nofollow noreferrer noopener">What is the Limit for number of ports in lag between 7100</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-are-the-following-messages-appearing-in-the-log-after-running-extended-diagnostics" target="_blank" rel="nofollow noreferrer noopener">Why are the following messages appearing in the log after running extended diagnostics?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Multicast-Traffic-stops-passing-after-upgrading-to-IdentiFi-code-10-x" target="_blank" rel="nofollow noreferrer noopener">Multicast Traffic stops passing after upgrading to IdentiFi code 10.x</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Empty-system-variable-port-in-OneView-script" target="_blank" rel="nofollow noreferrer noopener">Empty system variable "$port" in OneView script</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/C3-B3-Series-Error-when-logging-in-to-RW-or-other-account-on-switch-User-rw-not-allowed-to-login" target="_blank" rel="nofollow noreferrer noopener">C3/B3-Series - Error when logging in to RW or other account on switch: User:rw not allowed to login</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-learns-MAC-with-00-06-00-00-00-replaced-as-suffix-to-real-MAC-on-ports-with-APs-connected" target="_blank" rel="nofollow noreferrer noopener">Switch learns MAC with 00-06-00-00 replaced as suffix to real MAC on ports with APs connected</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-does-my-stack-display-the-source-Ethernet-address-as-MS-NLB-PhysServer-04-02-04-96-xx-xx-xx-in-a-Wireshark-capture" target="_blank" rel="nofollow noreferrer noopener">Why does my stack display the source Ethernet address as MS-NLB-PhysServer-04 (02:04:96:xx:xx:xx) in a Wireshark capture?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/RFC-3576-error-Re-authentication-Failed-Resources-Unavailable" target="_blank" rel="nofollow noreferrer noopener">RFC 3576 error "Re authentication Failed Resources Unavailable"</A><BR /> <BR /> Thursday, February 18, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Ridgeline-RADIUS-authentication-failing-due-to-unreachable-RADIUS-server" target="_blank" rel="nofollow noreferrer noopener">Ridgeline RADIUS authentication failing due to unreachable RADIUS server</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/SecureStack-CBP-Cell-CRC-errors-detected-on-SoC-unit" target="_blank" rel="nofollow noreferrer noopener">SecureStack "CBP Cell CRC errors detected on SoC unit"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-do-I-disable-CDP-on-Moto-Wireless" target="_blank" rel="nofollow noreferrer noopener">How do I disable CDP on Moto Wireless</A><BR /> <BR /> Friday, February 19, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Firefox-invalid-certificate-error-after-upgrade-of-firmware" target="_blank" rel="nofollow noreferrer noopener">Firefox invalid certificate error after upgrade of firmware</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-Add-IPmc-sender-entry" target="_blank" rel="nofollow noreferrer noopener">Unable to Add IPmc sender entry</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Verify-a-GRE-Tunnel-is-Up-and-Running-on-the-S-Series-and-K-Series" target="_blank" rel="nofollow noreferrer noopener">How To Verify a GRE Tunnel is Up and Running on the S-Series and K-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-standard-warraty-for-the-SNS-TAG-HPA" target="_blank" rel="nofollow noreferrer noopener">What is the standard warranty for the SNS-TAG-HPA?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/802-1x-client-authentication-takes-a-long-time-and-most-times-never-completes-at-all" target="_blank" rel="nofollow noreferrer noopener">802.1x client authentication takes a long time and most times never completes at all.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-match-conditions-are-supported-for-OSPF-import-policies" target="_blank" rel="nofollow noreferrer noopener">Which match conditions are supported for OSPF import policies?</A><BR /> <BR /> Saturday, February 20, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/AP-Availability-Report-Shows-no-Back-up-Tunnel-Connection" target="_blank" rel="nofollow noreferrer noopener">AP Availability Report Shows no Back-up Tunnel Connection</A><BR /> Wed, 24 Feb 2016 02:26:00 GMT Ken_Thomas 2016-02-24T02:26:00Z https://community.extremenetworks.com/t5/extremeswitching-other/2016-02-22-new-gtac-knowledge-articles-february-14-20-2016/m-p/10806#M1834 Here are the new articles that were published February 14 - February 20, 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, February 14, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/MLAG-FDB-Sync-Explained" target="_blank" rel="nofollow noreferrer noopener">MLAG FDB Sync Explained</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-802-11d-World-Mode-Standard-Supported-on-the-IdentiFi-Platform" target="_blank" rel="nofollow noreferrer noopener">Is 802.11d World Mode Standard Supported on the IdentiFi Platform</A><BR /> <BR /> Monday, February 15, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Syslog-messages-not-being-sent-during-bootup" target="_blank" rel="nofollow noreferrer noopener">Syslog messages not being sent during bootup</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/VRRP-Routed-Interface-see-2-Masters-on-S-Series-Core-Routers" target="_blank" rel="nofollow noreferrer noopener">VRRP Routed Interface see 2 Masters on S-Series Core Routers</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-do-I-configure-BootPRelay-on-EXOS-switches" target="_blank" rel="nofollow noreferrer noopener">How do I configure BootPRelay on EXOS switches</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IdentFi-wireless-appliance-rebooted-due-to-Power-Interruption" target="_blank" rel="nofollow noreferrer noopener">IdentFi wireless appliance rebooted due to Power Interruption</A><BR /> <BR /> Tuesday, February 16, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Error-A-route-received-from-BGP-could-not-be-processed-due-to-a-resource-failure" target="_blank" rel="nofollow noreferrer noopener">Error "A route received from BGP could not be processed due to a resource failure"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Ports-are-not-working-on-ReachNXT-100-8t" target="_blank" rel="nofollow noreferrer noopener">Ports are not working on ReachNXT 100-8t</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/SecureStack-Switch-Fails-During-Boot-and-Logs-error-message-12-READ-REG-ACK-ERRCODE-0x44" target="_blank" rel="nofollow noreferrer noopener">SecureStack Switch Fails During Boot and Logs error message "==12(READ_REG_ACK) ERRCODE=0x44"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-Appliance-Loses-Default-Gateway-After-a-Roboot" target="_blank" rel="nofollow noreferrer noopener">NAC Appliance Loses Default Gateway After a Roboot</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/siem-How-to-determine-average-event-payload-and-record-size" target="_blank" rel="nofollow noreferrer noopener">siem: How to determine average event payload and record size</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-included-with-a-NetSight-K12-license-NMS-K12" target="_blank" rel="nofollow noreferrer noopener">What is included with a NetSight K12 license, NMS-K12</A><BR /> <BR /> Wednesday, February 17, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Caveats-about-the-network-zone-attribute-in-an-ACL-policy" target="_blank" rel="nofollow noreferrer noopener">Caveats about the 'network zone' attribute in an ACL policy</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-clear-spantree-debug-counters" target="_blank" rel="nofollow noreferrer noopener">How to clear spantree debug counters</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/migration-from-N3-to-S3" target="_blank" rel="nofollow noreferrer noopener">Can the Same Config be Used for Migration from N-Series to S-Series?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/3825i-Kernel-panic-not-syncing-out-of-memory" target="_blank" rel="nofollow noreferrer noopener">3825i Kernel panic - not syncing: out of memory</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-Reset-with-1-DistServ-3-tDsBrdOk-serverWatchDog-5-Host-client-57-RtrLsnat-in-recv-for-6027-tics" target="_blank" rel="nofollow noreferrer noopener">S-Series : Reset with &lt;1&gt;DistServ[3.tDsBrdOk]serverWatchDog.5(Host), client 57(RtrLsnat) in recv for 6027 tics</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-Limit-for-number-of-ports-in-lag-between-7100" target="_blank" rel="nofollow noreferrer noopener">What is the Limit for number of ports in lag between 7100</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-are-the-following-messages-appearing-in-the-log-after-running-extended-diagnostics" target="_blank" rel="nofollow noreferrer noopener">Why are the following messages appearing in the log after running extended diagnostics?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Multicast-Traffic-stops-passing-after-upgrading-to-IdentiFi-code-10-x" target="_blank" rel="nofollow noreferrer noopener">Multicast Traffic stops passing after upgrading to IdentiFi code 10.x</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Empty-system-variable-port-in-OneView-script" target="_blank" rel="nofollow noreferrer noopener">Empty system variable "$port" in OneView script</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/C3-B3-Series-Error-when-logging-in-to-RW-or-other-account-on-switch-User-rw-not-allowed-to-login" target="_blank" rel="nofollow noreferrer noopener">C3/B3-Series - Error when logging in to RW or other account on switch: User:rw not allowed to login</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-learns-MAC-with-00-06-00-00-00-replaced-as-suffix-to-real-MAC-on-ports-with-APs-connected" target="_blank" rel="nofollow noreferrer noopener">Switch learns MAC with 00-06-00-00 replaced as suffix to real MAC on ports with APs connected</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-does-my-stack-display-the-source-Ethernet-address-as-MS-NLB-PhysServer-04-02-04-96-xx-xx-xx-in-a-Wireshark-capture" target="_blank" rel="nofollow noreferrer noopener">Why does my stack display the source Ethernet address as MS-NLB-PhysServer-04 (02:04:96:xx:xx:xx) in a Wireshark capture?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/RFC-3576-error-Re-authentication-Failed-Resources-Unavailable" target="_blank" rel="nofollow noreferrer noopener">RFC 3576 error "Re authentication Failed Resources Unavailable"</A><BR /> <BR /> Thursday, February 18, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Ridgeline-RADIUS-authentication-failing-due-to-unreachable-RADIUS-server" target="_blank" rel="nofollow noreferrer noopener">Ridgeline RADIUS authentication failing due to unreachable RADIUS server</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/SecureStack-CBP-Cell-CRC-errors-detected-on-SoC-unit" target="_blank" rel="nofollow noreferrer noopener">SecureStack "CBP Cell CRC errors detected on SoC unit"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-do-I-disable-CDP-on-Moto-Wireless" target="_blank" rel="nofollow noreferrer noopener">How do I disable CDP on Moto Wireless</A><BR /> <BR /> Friday, February 19, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Firefox-invalid-certificate-error-after-upgrade-of-firmware" target="_blank" rel="nofollow noreferrer noopener">Firefox invalid certificate error after upgrade of firmware</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-Add-IPmc-sender-entry" target="_blank" rel="nofollow noreferrer noopener">Unable to Add IPmc sender entry</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Verify-a-GRE-Tunnel-is-Up-and-Running-on-the-S-Series-and-K-Series" target="_blank" rel="nofollow noreferrer noopener">How To Verify a GRE Tunnel is Up and Running on the S-Series and K-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-standard-warraty-for-the-SNS-TAG-HPA" target="_blank" rel="nofollow noreferrer noopener">What is the standard warranty for the SNS-TAG-HPA?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/802-1x-client-authentication-takes-a-long-time-and-most-times-never-completes-at-all" target="_blank" rel="nofollow noreferrer noopener">802.1x client authentication takes a long time and most times never completes at all.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-match-conditions-are-supported-for-OSPF-import-policies" target="_blank" rel="nofollow noreferrer noopener">Which match conditions are supported for OSPF import policies?</A><BR /> <BR /> Saturday, February 20, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/AP-Availability-Report-Shows-no-Back-up-Tunnel-Connection" target="_blank" rel="nofollow noreferrer noopener">AP Availability Report Shows no Back-up Tunnel Connection</A><BR /> Wed, 24 Feb 2016 02:26:00 GMT https://community.extremenetworks.com/t5/extremeswitching-other/2016-02-22-new-gtac-knowledge-articles-february-14-20-2016/m-p/10806#M1834 Ken_Thomas 2016-02-24T02:26:00Z