topic RE: Summit 200-48 communication through PuTTY and COM Cable? in ExtremeSwitching (Other)

Summit 200-48 communication through PuTTY and COM Cable?

Taylor_Garlock — Sat, 01 Nov 2014 01:07:00 GMT

I'm trying to configure a Summit 200-48 and am encountering serious problems. I have a USB-COM converter and a null modem COM cable, but even with those and PuTTY I can't communicate with the switch. I can't enter text when I open the terminal emulator. Any thoughts?

EDIT: Specifically, either the PuTTY terminal opens and I can't input anything, or I get nothing with a message about a COM port problem .

RE: Summit 200-48 communication through PuTTY and COM Cable?

Kelvin_Pereira — Thu, 31 Aug 2017 05:59:00 GMT

Hi, I have the same problem. Have you found a solution to this?

RE: Summit 200-48 communication through PuTTY and COM Cable?

BradP — Fri, 01 Sep 2017 09:19:00 GMT

Hi Taylor/Kelvin,

I remember in the past that I would sometimes have to replace switches when their console ports would stop working. I haven't had to do it in a long time, but I did back in the EWare days. Not saying this is necessarily the case, but its possible that its the situation here. I'd say if the same USB/console/computer/terminal emulator settings are working with another Extreme switch, I'd say the console port may have a hardware issue.

Thanks
Brad

RE: Summit 200-48 communication through PuTTY and COM Cable?

Jeremy_Gibbs — Fri, 01 Sep 2017 11:16:00 GMT

Have you verified that the USB-COM is working with another device?

RE: Summit 200-48 communication through PuTTY and COM Cable?

Kelvin_Pereira — Fri, 01 Sep 2017 16:15:00 GMT

yes, the usb-com works fine. I believe the problem is in the switch, because its management light does not stop flashing.