https://community.extremenetworks.com/t5/extremeswitching-other/2016-09-19-new-gtac-knowledge-articles-september-11-17-2016/m-p/11243#M2271 Here are the new articles that were published September 11 - September 17 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, September 11, 2016:<BR /> none<BR /> <BR /> Monday, September 12, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/OSPF-neighbors-on-either-side-of-a-L2-switch-OSPF-route-updates-are-lost" target="_blank" rel="nofollow noreferrer noopener">OSPF neighbors on either side of a L2 switch, OSPF route updates are lost</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Error-when-enabling-SSH-on-SummitStack" target="_blank" rel="nofollow noreferrer noopener">Error when enabling SSH on SummitStack</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Inventory-Manager-fails-to-upgrade-EWC-firmware" target="_blank" rel="nofollow noreferrer noopener">Inventory Manager fails to upgrade EWC firmware</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Client-reports-show-packet-data-counters-0-and-other-fields-including-radio-protocol-rssi-as-n-a" target="_blank" rel="nofollow noreferrer noopener">Client reports show packet/data counters 0 and other fields including radio/protocol/rssi as n/a</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Active-clients-show-as-1-for-every-AP-in-the-GUI-Config-screen" target="_blank" rel="nofollow noreferrer noopener">Active clients show as 1 for every AP in the GUI Config screen</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-dim-the-LEDs-on-an-AP" target="_blank" rel="nofollow noreferrer noopener">Is it possible to dim the LEDs on an AP?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Extreme-Managment-Center-does-not-display-Wireless-Bandwidth" target="_blank" rel="nofollow noreferrer noopener">Extreme Managment Center does not display Wireless Bandwidth</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-Global-DHCP-Snooping-Disable-Over-ride-Local-VLAN-DHCP-Snooping" target="_blank" rel="nofollow noreferrer noopener">Does Global DHCP Snooping Disable Over-ride Local VLAN DHCP Snooping?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/OneView-Compass-search-not-finding-same-results-as-NetSight-Console-search" target="_blank" rel="nofollow noreferrer noopener">OneView Compass search not finding same results as NetSight Console search</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-meaning-of-these-log-messages-Erro-STP-InBPDU-Drop-Port-XX-Recv-own-loop-back-packet-from-same-port" target="_blank" rel="nofollow noreferrer noopener">What is the meaning of these log messages Port=XX: Recv own loop back packet from same port</A><BR /> <BR /> Tuesday, September 13, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-add-Summit-X460-G2-VIM-2q-to-an-existing-Summit-X670-G2-stack-using-SummitStack-V160" target="_blank" rel="nofollow noreferrer noopener">How to add Summit X460-G2 (VIM-2q) to an existing Summit X670-G2 stack using SummitStack-V160</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Archive-not-working-SNMP-STACK-Timeout-errors" target="_blank" rel="nofollow noreferrer noopener">Archive not working, SNMP STACK Timeout errors</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-i-factory-reset-my-switch-with-a-script" target="_blank" rel="nofollow noreferrer noopener">Can i factory reset my switch with a script?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/AP3620-using-DFS-channels-stuck-in-scanning-after-RADAR-is-detected" target="_blank" rel="nofollow noreferrer noopener">AP3620 using DFS channels stuck in scanning after RADAR is detected</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Clear-the-Admin-Password-on-the-former-Enterasys-N-S-Series-Solution" target="_blank" rel="nofollow noreferrer noopener">How to Clear the Admin Password on the former Enterasys N/S-Series Solution</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Video-Pixelation-is-observed-when-running-PIM-Dense-on-EXOS-device" target="_blank" rel="nofollow noreferrer noopener">Video Pixelation is observed when running PIM-Dense on EXOS device</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Users-logged-out-with-idle-timeout-message" target="_blank" rel="nofollow noreferrer noopener">Users logged out with idle timeout message.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-BD-X8-support-FEC-Forward-Error-Correction-on-100GE-interfaces" target="_blank" rel="nofollow noreferrer noopener">Does BD-X8 support FEC (Forward Error Correction) on 100GE interfaces?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-needed-to-connect-to-NAC-physical-appliance-RJ45-COM" target="_blank" rel="nofollow noreferrer noopener">What is needed to connect to NAC physical appliance RJ45 COM</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/K-Series-Logging-Buffer-displays-The-offline-button-on-the-line-card-in-slot-1-has-been-pressed" target="_blank" rel="nofollow noreferrer noopener">K-Series Linecard offline and Logging Buffer displays The offline button on the line card in slot 1 has been pressed</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-basic-ESRP-configuration-in-EXOS" target="_blank" rel="nofollow noreferrer noopener">How to create basic ESRP configuration in EXOS</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Troubleshooting-a-NAC-Control-Captive-Portal-not-responding-to-web-traffic" target="_blank" rel="nofollow noreferrer noopener">Troubleshooting a NAC/Control Captive Portal not responding to web traffic</A><BR /> <BR /> Wednesday, September 14, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/I-Series-constant-reboot-with-following-error-in-logs-broad-group-xgs3-c-1544" target="_blank" rel="nofollow noreferrer noopener">I-Series constant reboot with following error in logs "broad_group_xgs3.c(1544)"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-are-VxLAN-Limitations" target="_blank" rel="nofollow noreferrer noopener">What are VxLAN Limitations?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Setting-alerts-on-DHCPSnooping-putting-ports-in-D-Down-state" target="_blank" rel="nofollow noreferrer noopener">How to Set alerts on DHCPSnooping putting ports in D-Down state</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-a-location-for-a-NAC-Control-rule-in-Netsight-Management-Center" target="_blank" rel="nofollow noreferrer noopener">How to create a location for a NAC/Control rule in Netsight Management Center</A><BR /> <BR /> Thursday, September 15, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/PoE-controller-on-slot-detected-hardware-port-configuration-mismatch-Expected-36-found-48-0" target="_blank" rel="nofollow noreferrer noopener">]PoE controller on slot detected hardware port configuration mismatch. Expected 36 found 48+0</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-EXOS-have-the-ZTP-Cloud-Connector-included" target="_blank" rel="nofollow noreferrer noopener">Does EXOS have the ZTP+ Cloud Connector included?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/7100-Module-restart-with-Thread-Name-tSshM0" target="_blank" rel="nofollow noreferrer noopener">7100 - Module restart with Thread Name: tSshM0</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-have-the-10G-ports-enabled-on-an-ExtremeCloud-X440-G2" target="_blank" rel="nofollow noreferrer noopener">Is it possible to have the 10G ports enabled on an ExtremeCloud X440-G2?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Cloud-clients-are-showing-the-incorrect-Roles" target="_blank" rel="nofollow noreferrer noopener">Cloud clients are not timing out and showing the incorrect Roles</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-reboot-due-to-SNMPMaster-died-with-a-signal-6" target="_blank" rel="nofollow noreferrer noopener">Switch reboot due to SNMPMaster died with a signal 6</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/EXOS-switch-goes-in-reboot-loop-when-cloud-connector-is-set-as-preferred-image-on-Netsight" target="_blank" rel="nofollow noreferrer noopener">EXOS switch goes in reboot loop when cloud connector is set as preferred image on Netsight</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Authentication-request-become-stale-in-NAC-after-installation-of-Microsoft-patch-kn3172605" target="_blank" rel="nofollow noreferrer noopener">Authentication request become stale in NAC after installation of Microsoft patch kb3172605 or kb3172614</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Mac-reauthentication-enabled-on-EOS-switches-does-not-update-the-end-system-events" target="_blank" rel="nofollow noreferrer noopener">Mac reauthentication enabled on EOS switches does not update the end system events.</A><BR /> <BR /> Friday, September 16, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Failed-Fan-for-SSA" target="_blank" rel="nofollow noreferrer noopener">Failed Fan for SSA</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Configure-Spit-Tunnel-for-PPTP-on-XSR" target="_blank" rel="nofollow noreferrer noopener">How to Configure Spit Tunnel for PPTP on XSR</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Do-I-need-to-configure-mobility-in-addition-to-availability-when-using-two-controller" target="_blank" rel="nofollow noreferrer noopener">Do I need to configure mobility in addition to availability when using two controller?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Need-modifications-in-port-ID-TLV-Device-ID-TLV-sent-in-CDP-messages" target="_blank" rel="nofollow noreferrer noopener">Need modifications in port ID TLV, Device ID TLV sent in CDP messages.</A><BR /> <BR /> Saturday, September 17, 2016:<BR /> none Fri, 23 Sep 2016 18:23:00 GMT Ken_Thomas 2016-09-23T18:23:00Z https://community.extremenetworks.com/t5/extremeswitching-other/2016-09-19-new-gtac-knowledge-articles-september-11-17-2016/m-p/11243#M2271 Here are the new articles that were published September 11 - September 17 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, September 11, 2016:<BR /> none<BR /> <BR /> Monday, September 12, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/OSPF-neighbors-on-either-side-of-a-L2-switch-OSPF-route-updates-are-lost" target="_blank" rel="nofollow noreferrer noopener">OSPF neighbors on either side of a L2 switch, OSPF route updates are lost</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Error-when-enabling-SSH-on-SummitStack" target="_blank" rel="nofollow noreferrer noopener">Error when enabling SSH on SummitStack</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Inventory-Manager-fails-to-upgrade-EWC-firmware" target="_blank" rel="nofollow noreferrer noopener">Inventory Manager fails to upgrade EWC firmware</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Client-reports-show-packet-data-counters-0-and-other-fields-including-radio-protocol-rssi-as-n-a" target="_blank" rel="nofollow noreferrer noopener">Client reports show packet/data counters 0 and other fields including radio/protocol/rssi as n/a</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Active-clients-show-as-1-for-every-AP-in-the-GUI-Config-screen" target="_blank" rel="nofollow noreferrer noopener">Active clients show as 1 for every AP in the GUI Config screen</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-dim-the-LEDs-on-an-AP" target="_blank" rel="nofollow noreferrer noopener">Is it possible to dim the LEDs on an AP?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Extreme-Managment-Center-does-not-display-Wireless-Bandwidth" target="_blank" rel="nofollow noreferrer noopener">Extreme Managment Center does not display Wireless Bandwidth</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-Global-DHCP-Snooping-Disable-Over-ride-Local-VLAN-DHCP-Snooping" target="_blank" rel="nofollow noreferrer noopener">Does Global DHCP Snooping Disable Over-ride Local VLAN DHCP Snooping?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/OneView-Compass-search-not-finding-same-results-as-NetSight-Console-search" target="_blank" rel="nofollow noreferrer noopener">OneView Compass search not finding same results as NetSight Console search</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-meaning-of-these-log-messages-Erro-STP-InBPDU-Drop-Port-XX-Recv-own-loop-back-packet-from-same-port" target="_blank" rel="nofollow noreferrer noopener">What is the meaning of these log messages Port=XX: Recv own loop back packet from same port</A><BR /> <BR /> Tuesday, September 13, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-add-Summit-X460-G2-VIM-2q-to-an-existing-Summit-X670-G2-stack-using-SummitStack-V160" target="_blank" rel="nofollow noreferrer noopener">How to add Summit X460-G2 (VIM-2q) to an existing Summit X670-G2 stack using SummitStack-V160</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Archive-not-working-SNMP-STACK-Timeout-errors" target="_blank" rel="nofollow noreferrer noopener">Archive not working, SNMP STACK Timeout errors</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-i-factory-reset-my-switch-with-a-script" target="_blank" rel="nofollow noreferrer noopener">Can i factory reset my switch with a script?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/AP3620-using-DFS-channels-stuck-in-scanning-after-RADAR-is-detected" target="_blank" rel="nofollow noreferrer noopener">AP3620 using DFS channels stuck in scanning after RADAR is detected</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Clear-the-Admin-Password-on-the-former-Enterasys-N-S-Series-Solution" target="_blank" rel="nofollow noreferrer noopener">How to Clear the Admin Password on the former Enterasys N/S-Series Solution</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Video-Pixelation-is-observed-when-running-PIM-Dense-on-EXOS-device" target="_blank" rel="nofollow noreferrer noopener">Video Pixelation is observed when running PIM-Dense on EXOS device</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Users-logged-out-with-idle-timeout-message" target="_blank" rel="nofollow noreferrer noopener">Users logged out with idle timeout message.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-BD-X8-support-FEC-Forward-Error-Correction-on-100GE-interfaces" target="_blank" rel="nofollow noreferrer noopener">Does BD-X8 support FEC (Forward Error Correction) on 100GE interfaces?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-needed-to-connect-to-NAC-physical-appliance-RJ45-COM" target="_blank" rel="nofollow noreferrer noopener">What is needed to connect to NAC physical appliance RJ45 COM</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/K-Series-Logging-Buffer-displays-The-offline-button-on-the-line-card-in-slot-1-has-been-pressed" target="_blank" rel="nofollow noreferrer noopener">K-Series Linecard offline and Logging Buffer displays The offline button on the line card in slot 1 has been pressed</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-basic-ESRP-configuration-in-EXOS" target="_blank" rel="nofollow noreferrer noopener">How to create basic ESRP configuration in EXOS</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Troubleshooting-a-NAC-Control-Captive-Portal-not-responding-to-web-traffic" target="_blank" rel="nofollow noreferrer noopener">Troubleshooting a NAC/Control Captive Portal not responding to web traffic</A><BR /> <BR /> Wednesday, September 14, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/I-Series-constant-reboot-with-following-error-in-logs-broad-group-xgs3-c-1544" target="_blank" rel="nofollow noreferrer noopener">I-Series constant reboot with following error in logs "broad_group_xgs3.c(1544)"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-are-VxLAN-Limitations" target="_blank" rel="nofollow noreferrer noopener">What are VxLAN Limitations?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Setting-alerts-on-DHCPSnooping-putting-ports-in-D-Down-state" target="_blank" rel="nofollow noreferrer noopener">How to Set alerts on DHCPSnooping putting ports in D-Down state</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-a-location-for-a-NAC-Control-rule-in-Netsight-Management-Center" target="_blank" rel="nofollow noreferrer noopener">How to create a location for a NAC/Control rule in Netsight Management Center</A><BR /> <BR /> Thursday, September 15, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/PoE-controller-on-slot-detected-hardware-port-configuration-mismatch-Expected-36-found-48-0" target="_blank" rel="nofollow noreferrer noopener">]PoE controller on slot detected hardware port configuration mismatch. Expected 36 found 48+0</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-EXOS-have-the-ZTP-Cloud-Connector-included" target="_blank" rel="nofollow noreferrer noopener">Does EXOS have the ZTP+ Cloud Connector included?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/7100-Module-restart-with-Thread-Name-tSshM0" target="_blank" rel="nofollow noreferrer noopener">7100 - Module restart with Thread Name: tSshM0</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-have-the-10G-ports-enabled-on-an-ExtremeCloud-X440-G2" target="_blank" rel="nofollow noreferrer noopener">Is it possible to have the 10G ports enabled on an ExtremeCloud X440-G2?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Cloud-clients-are-showing-the-incorrect-Roles" target="_blank" rel="nofollow noreferrer noopener">Cloud clients are not timing out and showing the incorrect Roles</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-reboot-due-to-SNMPMaster-died-with-a-signal-6" target="_blank" rel="nofollow noreferrer noopener">Switch reboot due to SNMPMaster died with a signal 6</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/EXOS-switch-goes-in-reboot-loop-when-cloud-connector-is-set-as-preferred-image-on-Netsight" target="_blank" rel="nofollow noreferrer noopener">EXOS switch goes in reboot loop when cloud connector is set as preferred image on Netsight</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Authentication-request-become-stale-in-NAC-after-installation-of-Microsoft-patch-kn3172605" target="_blank" rel="nofollow noreferrer noopener">Authentication request become stale in NAC after installation of Microsoft patch kb3172605 or kb3172614</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Mac-reauthentication-enabled-on-EOS-switches-does-not-update-the-end-system-events" target="_blank" rel="nofollow noreferrer noopener">Mac reauthentication enabled on EOS switches does not update the end system events.</A><BR /> <BR /> Friday, September 16, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Failed-Fan-for-SSA" target="_blank" rel="nofollow noreferrer noopener">Failed Fan for SSA</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Configure-Spit-Tunnel-for-PPTP-on-XSR" target="_blank" rel="nofollow noreferrer noopener">How to Configure Spit Tunnel for PPTP on XSR</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Do-I-need-to-configure-mobility-in-addition-to-availability-when-using-two-controller" target="_blank" rel="nofollow noreferrer noopener">Do I need to configure mobility in addition to availability when using two controller?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Need-modifications-in-port-ID-TLV-Device-ID-TLV-sent-in-CDP-messages" target="_blank" rel="nofollow noreferrer noopener">Need modifications in port ID TLV, Device ID TLV sent in CDP messages.</A><BR /> <BR /> Saturday, September 17, 2016:<BR /> none Fri, 23 Sep 2016 18:23:00 GMT https://community.extremenetworks.com/t5/extremeswitching-other/2016-09-19-new-gtac-knowledge-articles-september-11-17-2016/m-p/11243#M2271 Ken_Thomas 2016-09-23T18:23:00Z