topic Configure Spanning Tree 221 Series no XOS in ExtremeSwitching (Other)

Configure Spanning Tree 221 Series no XOS

JAIRO_ALDEMAR_R — Tue, 20 Nov 2018 08:00:00 GMT

Can anyone share any configuration of most services in a switchn extreme 210 and 220 series? These are not XOS, there is no clear documentation of this series of equipment. Thank you

RE: Configure Spanning Tree 221 Series no XOS

Roy_Noh — Tue, 20 Nov 2018 08:48:00 GMT

You can find some guide documents with below links.

1. ExtremeSwitching 200 Series: Administration Guide
https://documentation.extremenetworks.com/200_admin/GUID-96CBB609-7F3D-4129-9A32-D67AFE133225.shtml

2. ExtremeSwitching 200 Series: Command Reference Guide
https://documentation.extremenetworks.com/200_commands/GUID-6D7DFD34-F015-49D7-ABCD-88E5D400C672.sht...

3. ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide
https://documentation.extremenetworks.com/200_hardware/200_Series/HW_Install/c_2xx_switches.shtml

4. ExtremeSwitching 200 Series: Initial Configuration and Setup
https://documentation.extremenetworks.com/200_setup/200_Series/Initial_Config/c_cli_basics.shtml

Those are posted on extreme portal site.
Hope these are useful for you.

RE: Configure Spanning Tree 221 Series no XOS

Luke_French — Tue, 20 Nov 2018 08:48:00 GMT

Check the following article https://gtacknowledge.extremenetworks.com/articles/How_To/Getting-started-with-200-Series

RE: Configure Spanning Tree 221 Series no XOS

Larry_Kunz — Tue, 20 Nov 2018 20:23:00 GMT

If you're especially interested in Spanning Tree Protocol, you can look at this topic and the ones that follow it. The CLI commands are documented in this topic and the ones that follow it.

Larry Kunz
Information Development
Extreme Networks