topic RE: Visio stencils for a Summit48i, model 15502? in ExtremeSwitching (Other)

Visio stencils for a Summit48i, model 15502?

john29 — Tue, 06 Jun 2017 21:45:00 GMT

I've looked through all of the Visio stencils that I can find, but can't locate one for a Summit48i, model 15502. I know it's really old, but I still have one that I need to add to a diagram. Any advice on locating it, or something comparable, would be greatly appreciated!

RE: Visio stencils for a Summit48i, model 15502?

Drew_C — Tue, 06 Jun 2017 21:50:00 GMT

Hi John, Welcome to The Hub!
Did you see this file on the Visio Stencil page: Summit Legacy (EWare)

It should be in there... I'd check first but there is no Visio for Mac 🙂

RE: Visio stencils for a Summit48i, model 15502?

john29 — Tue, 06 Jun 2017 22:02:00 GMT

Hi, Drew.
Thanks for getting back to me so quickly!

That was actually the first one I looked through, but there is no 15502 in it. There are plenty of 1U 48-port devices, but not the one I need. It's a 2U box, with 48 100mbs copper ports and 4 1000mb GBIC slots. Attached is a picture. Do you know of another model that's close?

Thanks!
John

RE: Visio stencils for a Summit48i, model 15502?

Drew_C — Tue, 06 Jun 2017 22:02:00 GMT

Oh... that 48i. Not the 48si. Sorry for adding the 's' in my mind when I read your post.

Can you fake it with the Summit 1i or 5i (11104 & 11504)? Both of those are 2U, but have fewer ports. I don't think I'll be able to find a stencil for the 48i, but will take a look. I compiled the current Legacy file several years ago with everything I had.

RE: Visio stencils for a Summit48i, model 15502?

john29 — Tue, 06 Jun 2017 22:02:00 GMT

Thanks! I'll give it a shot. Can I put connector points on them? I was trying to use the 300-48, but it isn't letting me do connections directly from individual ports.

RE: Visio stencils for a Summit48i, model 15502?

Drew_C — Tue, 06 Jun 2017 22:02:00 GMT

You may have to edit them in the stencil editor, but I don't think it will give you much fuss. It might be easier to label your connection lines to make it clear where each one goes.
Do I need to get you a sales contact for an upgrade? 🙂

RE: Visio stencils for a Summit48i, model 15502?

AnonymousM — Tue, 06 Jun 2017 22:02:00 GMT

That's the oldest I could find. I don't have Visio installed right now, so I could not check.
https://extremenetworks2com-my.sharepoint.com/personal/ohagemann_extremenetworks_com/Documents/Visio...