https://community.extremenetworks.com/t5/extremeswitching-other/2016-02-15-new-gtac-knowledge-articles-february-7-february-13/m-p/11564#M2592 Here are the new articles that were published February 7 - February 13, 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, February 07, 2016:<BR /> none<BR /> <BR /> Monday, February 08, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/PoE-initialization-failed-on-S-Series" target="_blank" rel="nofollow noreferrer noopener">"PoE initialization failed." on S-Series/K-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Peak-Rx-bandwidth-does-not-get-updated-periodically" target="_blank" rel="nofollow noreferrer noopener">Peak Rx % bandwidth does not get updated periodically</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-are-the-Power-Specifications-for-the-7100-Series" target="_blank" rel="nofollow noreferrer noopener">What are the Power Specifications for the 7100-Series?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Setting-the-Next-Reboot-time-via-SNMP-with-EXOS-Set-Next-reboot-time-via-SNMP-with-EXOS" target="_blank" rel="nofollow noreferrer noopener">Setting the "Next Reboot" time via SNMP with EXOS.Set Next reboot time via SNMP with EXOS</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-do-I-know-if-the-NAC-has-joined-the-domain" target="_blank" rel="nofollow noreferrer noopener">How do I know if the NAC has joined the domain?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Concerns-About-Running-IPv4-and-IPv6-on-the-Same-Network" target="_blank" rel="nofollow noreferrer noopener">Concerns About Running IPv4 and IPv6 on the Same Network</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-a-Script-be-Run-to-Disable-all-Ports-with-No-Link-on-an-S-Series" target="_blank" rel="nofollow noreferrer noopener">Can a Script be Run to Disable all Ports with No Link on an S-Series?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/DCS-mode-of-none-shown-in-manuals-and-help-when-it-is-not-an-available-option-in-the-GUI" target="_blank" rel="nofollow noreferrer noopener">DCS mode of none shown in manuals and help when it is not an available option in the GUI</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Error-when-attempting-to-check-for-firmware-updates-in-Inventory-Manager" target="_blank" rel="nofollow noreferrer noopener">Error when attempting to check for firmware updates in Inventory Manager.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-NAC-appliance-to-use-SHA-and-AES-for-SNMP" target="_blank" rel="nofollow noreferrer noopener">How to configure a NAC appliance to use SHA and AES for SNMP</A><BR /> <BR /> Tuesday, February 09, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Fuji-RX-Main-error-on-S-Series" target="_blank" rel="nofollow noreferrer noopener">Fuji RX Main error on S-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/X670V-with-VIM4-40G4X-stacking-ports-and-uplinks" target="_blank" rel="nofollow noreferrer noopener">X670V with VIM4-40G4X stacking ports and uplinks</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-a-part-be-added-to-a-service-contract-after-it-has-failed" target="_blank" rel="nofollow noreferrer noopener">Can a part be added to a service contract after it has failed?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-EOS-support-PVST" target="_blank" rel="nofollow noreferrer noopener">Does EOS support PVST?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/VSB-S-Series-slot-resets-with-error-message-PB-IDR-ERROR-MEMORY" target="_blank" rel="nofollow noreferrer noopener">VSB S-Series slot resets with error message "PB_IDR_ERROR_MEMORY"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Are-the-Identifi-AP26xx-supported-in-9-x-code" target="_blank" rel="nofollow noreferrer noopener">Are the Identifi AP26xx supported in 9.x code?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Creating-a-default-route-in-a-physical-topology-which-overlaps-a-routed-VNS-causes-the-static-default-route-to-become-inactive" target="_blank" rel="nofollow noreferrer noopener">Creating a default route in a physical topology which overlaps a routed VNS causes the static default route to become inactive</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S8-Blade-reset-after-adding-Virtual-IP-address-to-VRRP-configuration" target="_blank" rel="nofollow noreferrer noopener">S8 - Blade reset after adding Virtual IP address to VRRP configuration</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Capacity-Planning-Not-Showing-Correct-Date-Information-for-Link-Up-Down-Events" target="_blank" rel="nofollow noreferrer noopener">Capacity Planning Not Showing Correct Date Information for Link Up/Down Events</A><BR /> <BR /> Wednesday, February 10, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-NetSight-Early-Access-EA" target="_blank" rel="nofollow noreferrer noopener">What is NetSight Early Access (EA) release ?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Clients-unable-to-connect-to-AP-radios-showing-0-dBm-when-channel-width-set-to-Auto" target="_blank" rel="nofollow noreferrer noopener">Clients unable to connect to AP, radios showing 0 dBm when channel width set to 'Auto'</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/IdentiFi-For-Load-Groups-Radio-Preference-do-WLAN-s-need-to-be-assigned-for-band-steering-to-work" target="_blank" rel="nofollow noreferrer noopener">IdentiFi | For Load Groups -&gt; Radio Preference, do WLAN's need to be assigned for band steering to work?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/CFM-SNMP-values-are-different-to-CLI-values" target="_blank" rel="nofollow noreferrer noopener">CFM SNMP values are different to CLI values</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Existing-blade-not-being-recognized-after-new-blade-is-installed-in-chassis" target="_blank" rel="nofollow noreferrer noopener">Existing blade not being recognized after new blade is installed in chassis</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-code-upgrade-moved-APs-role-from-Guardian-to-Traffic-Forwarder" target="_blank" rel="nofollow noreferrer noopener">Wireless code upgrade moved APs role from Guardian to Traffic Forwarder</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-backup-a-NAC-Database-or-NAC-Configuration" target="_blank" rel="nofollow noreferrer noopener">How to backup a NAC Database or NAC Configuration</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-restore-a-NAC-Database-or-Configuration-from-a-saved-backup" target="_blank" rel="nofollow noreferrer noopener">How to restore a NAC Database or Configuration from a saved backup</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-K-Series-be-Powered-with-multiple-K-AC-PS-from-120V-and-208V-sources-in-the-Same-chassis" target="_blank" rel="nofollow noreferrer noopener">Can K-Series be Powered with multiple K-AC-PS from 120V and 208V sources in the Same chassis?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Cisco-2960X-phones-not-being-associated-to-the-correct-VLAN" target="_blank" rel="nofollow noreferrer noopener">Cisco 2960X phones not being associated to the correct VLAN</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-important-to-use-cross-over-cables-on-EXOS-switches" target="_blank" rel="nofollow noreferrer noopener">Is it important to use cross over cables on EXOS switches?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/v2110-wireless-controller-may-run-out-of-memory-when-the-vmware-host-memory-is-overcomitted" target="_blank" rel="nofollow noreferrer noopener">v2110 wireless controller may run out of memory when the vmware host memory is overcomitted</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-minimum-version-of-firmware-of-the-S-series-for-deployment-of-Purview" target="_blank" rel="nofollow noreferrer noopener">What is the minimum version of firmware of the S series for deployment of Purview?</A><BR /> <BR /> Thursday, February 11, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-MU-Session-Manager-Not-Responding" target="_blank" rel="nofollow noreferrer noopener">IdentiFi Wireless spontaneous reset "Cause: MU Session Manager Not Responding."</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-preferring-OSPF-type-2-Default-route-from-Router-one-Hop-Away-Over-Route-Advertised-from-Adjacent-Router" target="_blank" rel="nofollow noreferrer noopener">S-Series preferring OSPF type 2 Default route from Router one Hop Away Over Route Advertised from Adjacent Router</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Do-we-can-use-SFP-module-instead-of-SFP-module-to-the-ports-49-and-50-of-X440-48" target="_blank" rel="nofollow noreferrer noopener">Do we can use SFP module instead of SFP+ module to the ports 49 and 50 of X440-48</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-does-a-fourth-I-O-module-not-insert-in-S6-chassis" target="_blank" rel="nofollow noreferrer noopener">Why does a fourth I/O module not insert in S6 chassis?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-Purview-supported-on-a-standard-linux-implementation-such-as-redhat-or-suse" target="_blank" rel="nofollow noreferrer noopener">Is Purview supported on a standard linux implementation such as redhat or suse?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Surface-Pro-4-does-not-connect-to-SSID-with-management-frame-protection-enabled" target="_blank" rel="nofollow noreferrer noopener">Surface Pro 4 does not connect to SSID with management frame protection enabled</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-can-I-change-the-length-of-time-that-Purview-data-is-stored-on-Netsight-Database" target="_blank" rel="nofollow noreferrer noopener">Where can I change the length of time that Purview data is stored on Netsight Database?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-reboot-Causes-client-to-Obtain-IP-From-the-Static-VLAN-Not-the-Dynamic-VLAN-Assigned-by-NAC-Using-RFC-3580-Process" target="_blank" rel="nofollow noreferrer noopener">Switch reboot Causes client to Obtain IP From the Static VLAN Not the Dynamic VLAN Assigned by NAC Using RFC 3580 Process</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-setup-Location-Batch-Reporting-to-show-Non-Associated-Clients" target="_blank" rel="nofollow noreferrer noopener">How to setup Location Batch Reporting to show Non-Associated Clients</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IdentiFi-Wireless-AP-WS-AP39xx-not-showing-DFS-channels" target="_blank" rel="nofollow noreferrer noopener">IdentiFi Wireless AP WS-AP39xx not showing DFS channels</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-see-port-or-vlan-information-in-OneView" target="_blank" rel="nofollow noreferrer noopener">Unable to see port or vlan information in OneView</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/IdentiFi-Why-don-t-clients-get-IPv6-on-routed-topologies-that-are-B-AC" target="_blank" rel="nofollow noreferrer noopener">IdentiFi - Why don't clients get IPv6 on routed topologies that are B@AC?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/SecureStack-fails-to-boot-due-to-SDRAM-testing-failed-at-location-0x08000000" target="_blank" rel="nofollow noreferrer noopener">SecureStack fails to boot due to "SDRAM testing failed at location 0x08000000"</A><BR /> <BR /> Friday, February 12, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-Clients-Get-Certificate-Error-When-Logging-In" target="_blank" rel="nofollow noreferrer noopener">Wireless Clients Get Certificate Error When Logging In</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/NAC-enable-IPv6-support-in-NAC" target="_blank" rel="nofollow noreferrer noopener">Does the Node/Alias of a Securestack Support Collection/Reporting on IPv6 Addresses in the ctAlias MIB?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/POE-is-showing-Other-Fault-on-all-ports-inlinepower" target="_blank" rel="nofollow noreferrer noopener">POE is showing Other Fault on all ports inlinepower</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-do-I-see-clearflow-xmlapi-messages-in-the-logs" target="_blank" rel="nofollow noreferrer noopener">Why do I see "clearflow xmlapi" messages in the logs?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-limit-the-number-of-wireless-clients-of-a-specific-type-IE-Blackberry-that-can-connect-to-an-AP" target="_blank" rel="nofollow noreferrer noopener">Is it possible to limit the number of wireless clients of a specific type (IE, Blackberry) that can connect to an AP?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/On-Securestack-Modular-devices-does-port-mirroring-occur-before-or-after-policy-gets-applied-to-user-traffic" target="_blank" rel="nofollow noreferrer noopener">On Securestack / Modular devices, does port mirroring occur before or after policy gets applied to user traffic?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/When-deleting-a-port-from-a-mirror-instance-the-Error-No-matching-filter-found-is-observed" target="_blank" rel="nofollow noreferrer noopener">When deleting a port from a mirror instance the, "Error: No matching filter found!" is observed</A><BR /> <BR /> Saturday, February 13, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-telnet-ssh-debug-in-NetSight-for-Diagnostic-Configuration" target="_blank" rel="nofollow noreferrer noopener">How to enable telnet/ssh debug in NetSight for Diagnostic Configuration</A> Sat, 20 Feb 2016 00:07:00 GMT Ken_Thomas 2016-02-20T00:07:00Z https://community.extremenetworks.com/t5/extremeswitching-other/2016-02-15-new-gtac-knowledge-articles-february-7-february-13/m-p/11564#M2592 Here are the new articles that were published February 7 - February 13, 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, February 07, 2016:<BR /> none<BR /> <BR /> Monday, February 08, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/PoE-initialization-failed-on-S-Series" target="_blank" rel="nofollow noreferrer noopener">"PoE initialization failed." on S-Series/K-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Peak-Rx-bandwidth-does-not-get-updated-periodically" target="_blank" rel="nofollow noreferrer noopener">Peak Rx % bandwidth does not get updated periodically</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-are-the-Power-Specifications-for-the-7100-Series" target="_blank" rel="nofollow noreferrer noopener">What are the Power Specifications for the 7100-Series?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Setting-the-Next-Reboot-time-via-SNMP-with-EXOS-Set-Next-reboot-time-via-SNMP-with-EXOS" target="_blank" rel="nofollow noreferrer noopener">Setting the "Next Reboot" time via SNMP with EXOS.Set Next reboot time via SNMP with EXOS</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-do-I-know-if-the-NAC-has-joined-the-domain" target="_blank" rel="nofollow noreferrer noopener">How do I know if the NAC has joined the domain?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Concerns-About-Running-IPv4-and-IPv6-on-the-Same-Network" target="_blank" rel="nofollow noreferrer noopener">Concerns About Running IPv4 and IPv6 on the Same Network</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-a-Script-be-Run-to-Disable-all-Ports-with-No-Link-on-an-S-Series" target="_blank" rel="nofollow noreferrer noopener">Can a Script be Run to Disable all Ports with No Link on an S-Series?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/DCS-mode-of-none-shown-in-manuals-and-help-when-it-is-not-an-available-option-in-the-GUI" target="_blank" rel="nofollow noreferrer noopener">DCS mode of none shown in manuals and help when it is not an available option in the GUI</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Error-when-attempting-to-check-for-firmware-updates-in-Inventory-Manager" target="_blank" rel="nofollow noreferrer noopener">Error when attempting to check for firmware updates in Inventory Manager.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-NAC-appliance-to-use-SHA-and-AES-for-SNMP" target="_blank" rel="nofollow noreferrer noopener">How to configure a NAC appliance to use SHA and AES for SNMP</A><BR /> <BR /> Tuesday, February 09, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Fuji-RX-Main-error-on-S-Series" target="_blank" rel="nofollow noreferrer noopener">Fuji RX Main error on S-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/X670V-with-VIM4-40G4X-stacking-ports-and-uplinks" target="_blank" rel="nofollow noreferrer noopener">X670V with VIM4-40G4X stacking ports and uplinks</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-a-part-be-added-to-a-service-contract-after-it-has-failed" target="_blank" rel="nofollow noreferrer noopener">Can a part be added to a service contract after it has failed?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-EOS-support-PVST" target="_blank" rel="nofollow noreferrer noopener">Does EOS support PVST?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/VSB-S-Series-slot-resets-with-error-message-PB-IDR-ERROR-MEMORY" target="_blank" rel="nofollow noreferrer noopener">VSB S-Series slot resets with error message "PB_IDR_ERROR_MEMORY"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Are-the-Identifi-AP26xx-supported-in-9-x-code" target="_blank" rel="nofollow noreferrer noopener">Are the Identifi AP26xx supported in 9.x code?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Creating-a-default-route-in-a-physical-topology-which-overlaps-a-routed-VNS-causes-the-static-default-route-to-become-inactive" target="_blank" rel="nofollow noreferrer noopener">Creating a default route in a physical topology which overlaps a routed VNS causes the static default route to become inactive</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S8-Blade-reset-after-adding-Virtual-IP-address-to-VRRP-configuration" target="_blank" rel="nofollow noreferrer noopener">S8 - Blade reset after adding Virtual IP address to VRRP configuration</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Capacity-Planning-Not-Showing-Correct-Date-Information-for-Link-Up-Down-Events" target="_blank" rel="nofollow noreferrer noopener">Capacity Planning Not Showing Correct Date Information for Link Up/Down Events</A><BR /> <BR /> Wednesday, February 10, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-NetSight-Early-Access-EA" target="_blank" rel="nofollow noreferrer noopener">What is NetSight Early Access (EA) release ?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Clients-unable-to-connect-to-AP-radios-showing-0-dBm-when-channel-width-set-to-Auto" target="_blank" rel="nofollow noreferrer noopener">Clients unable to connect to AP, radios showing 0 dBm when channel width set to 'Auto'</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/IdentiFi-For-Load-Groups-Radio-Preference-do-WLAN-s-need-to-be-assigned-for-band-steering-to-work" target="_blank" rel="nofollow noreferrer noopener">IdentiFi | For Load Groups -&gt; Radio Preference, do WLAN's need to be assigned for band steering to work?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/CFM-SNMP-values-are-different-to-CLI-values" target="_blank" rel="nofollow noreferrer noopener">CFM SNMP values are different to CLI values</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Existing-blade-not-being-recognized-after-new-blade-is-installed-in-chassis" target="_blank" rel="nofollow noreferrer noopener">Existing blade not being recognized after new blade is installed in chassis</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-code-upgrade-moved-APs-role-from-Guardian-to-Traffic-Forwarder" target="_blank" rel="nofollow noreferrer noopener">Wireless code upgrade moved APs role from Guardian to Traffic Forwarder</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-backup-a-NAC-Database-or-NAC-Configuration" target="_blank" rel="nofollow noreferrer noopener">How to backup a NAC Database or NAC Configuration</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-restore-a-NAC-Database-or-Configuration-from-a-saved-backup" target="_blank" rel="nofollow noreferrer noopener">How to restore a NAC Database or Configuration from a saved backup</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-K-Series-be-Powered-with-multiple-K-AC-PS-from-120V-and-208V-sources-in-the-Same-chassis" target="_blank" rel="nofollow noreferrer noopener">Can K-Series be Powered with multiple K-AC-PS from 120V and 208V sources in the Same chassis?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Cisco-2960X-phones-not-being-associated-to-the-correct-VLAN" target="_blank" rel="nofollow noreferrer noopener">Cisco 2960X phones not being associated to the correct VLAN</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-important-to-use-cross-over-cables-on-EXOS-switches" target="_blank" rel="nofollow noreferrer noopener">Is it important to use cross over cables on EXOS switches?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/v2110-wireless-controller-may-run-out-of-memory-when-the-vmware-host-memory-is-overcomitted" target="_blank" rel="nofollow noreferrer noopener">v2110 wireless controller may run out of memory when the vmware host memory is overcomitted</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-minimum-version-of-firmware-of-the-S-series-for-deployment-of-Purview" target="_blank" rel="nofollow noreferrer noopener">What is the minimum version of firmware of the S series for deployment of Purview?</A><BR /> <BR /> Thursday, February 11, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-MU-Session-Manager-Not-Responding" target="_blank" rel="nofollow noreferrer noopener">IdentiFi Wireless spontaneous reset "Cause: MU Session Manager Not Responding."</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-preferring-OSPF-type-2-Default-route-from-Router-one-Hop-Away-Over-Route-Advertised-from-Adjacent-Router" target="_blank" rel="nofollow noreferrer noopener">S-Series preferring OSPF type 2 Default route from Router one Hop Away Over Route Advertised from Adjacent Router</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Do-we-can-use-SFP-module-instead-of-SFP-module-to-the-ports-49-and-50-of-X440-48" target="_blank" rel="nofollow noreferrer noopener">Do we can use SFP module instead of SFP+ module to the ports 49 and 50 of X440-48</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-does-a-fourth-I-O-module-not-insert-in-S6-chassis" target="_blank" rel="nofollow noreferrer noopener">Why does a fourth I/O module not insert in S6 chassis?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-Purview-supported-on-a-standard-linux-implementation-such-as-redhat-or-suse" target="_blank" rel="nofollow noreferrer noopener">Is Purview supported on a standard linux implementation such as redhat or suse?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Surface-Pro-4-does-not-connect-to-SSID-with-management-frame-protection-enabled" target="_blank" rel="nofollow noreferrer noopener">Surface Pro 4 does not connect to SSID with management frame protection enabled</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-can-I-change-the-length-of-time-that-Purview-data-is-stored-on-Netsight-Database" target="_blank" rel="nofollow noreferrer noopener">Where can I change the length of time that Purview data is stored on Netsight Database?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-reboot-Causes-client-to-Obtain-IP-From-the-Static-VLAN-Not-the-Dynamic-VLAN-Assigned-by-NAC-Using-RFC-3580-Process" target="_blank" rel="nofollow noreferrer noopener">Switch reboot Causes client to Obtain IP From the Static VLAN Not the Dynamic VLAN Assigned by NAC Using RFC 3580 Process</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-setup-Location-Batch-Reporting-to-show-Non-Associated-Clients" target="_blank" rel="nofollow noreferrer noopener">How to setup Location Batch Reporting to show Non-Associated Clients</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IdentiFi-Wireless-AP-WS-AP39xx-not-showing-DFS-channels" target="_blank" rel="nofollow noreferrer noopener">IdentiFi Wireless AP WS-AP39xx not showing DFS channels</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-see-port-or-vlan-information-in-OneView" target="_blank" rel="nofollow noreferrer noopener">Unable to see port or vlan information in OneView</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/IdentiFi-Why-don-t-clients-get-IPv6-on-routed-topologies-that-are-B-AC" target="_blank" rel="nofollow noreferrer noopener">IdentiFi - Why don't clients get IPv6 on routed topologies that are B@AC?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/SecureStack-fails-to-boot-due-to-SDRAM-testing-failed-at-location-0x08000000" target="_blank" rel="nofollow noreferrer noopener">SecureStack fails to boot due to "SDRAM testing failed at location 0x08000000"</A><BR /> <BR /> Friday, February 12, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-Clients-Get-Certificate-Error-When-Logging-In" target="_blank" rel="nofollow noreferrer noopener">Wireless Clients Get Certificate Error When Logging In</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/NAC-enable-IPv6-support-in-NAC" target="_blank" rel="nofollow noreferrer noopener">Does the Node/Alias of a Securestack Support Collection/Reporting on IPv6 Addresses in the ctAlias MIB?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/POE-is-showing-Other-Fault-on-all-ports-inlinepower" target="_blank" rel="nofollow noreferrer noopener">POE is showing Other Fault on all ports inlinepower</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-do-I-see-clearflow-xmlapi-messages-in-the-logs" target="_blank" rel="nofollow noreferrer noopener">Why do I see "clearflow xmlapi" messages in the logs?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-limit-the-number-of-wireless-clients-of-a-specific-type-IE-Blackberry-that-can-connect-to-an-AP" target="_blank" rel="nofollow noreferrer noopener">Is it possible to limit the number of wireless clients of a specific type (IE, Blackberry) that can connect to an AP?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/On-Securestack-Modular-devices-does-port-mirroring-occur-before-or-after-policy-gets-applied-to-user-traffic" target="_blank" rel="nofollow noreferrer noopener">On Securestack / Modular devices, does port mirroring occur before or after policy gets applied to user traffic?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/When-deleting-a-port-from-a-mirror-instance-the-Error-No-matching-filter-found-is-observed" target="_blank" rel="nofollow noreferrer noopener">When deleting a port from a mirror instance the, "Error: No matching filter found!" is observed</A><BR /> <BR /> Saturday, February 13, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-telnet-ssh-debug-in-NetSight-for-Diagnostic-Configuration" target="_blank" rel="nofollow noreferrer noopener">How to enable telnet/ssh debug in NetSight for Diagnostic Configuration</A> Sat, 20 Feb 2016 00:07:00 GMT https://community.extremenetworks.com/t5/extremeswitching-other/2016-02-15-new-gtac-knowledge-articles-february-7-february-13/m-p/11564#M2592 Ken_Thomas 2016-02-20T00:07:00Z