topic RE: Number of Licenses Needed on Stack in ExtremeSwitching (Other)

Number of Licenses Needed on Stack

bw447 — Thu, 18 Dec 2014 20:43:00 GMT

I have 3 x670 switches stacked together (with ethernet ports). All 3 are running with an Advanced Edge License. We currently have ospf running (but with only a few vlans, that allows us to get by with an Advanced Edge license). We want to enable PIM fro multicast routing, however in order to do that you need to have a Core license. My question is on which switches do I need to have a Core license installed? Stack Topology is a Ring Active Topology is a Ring Node MAC Address Slot Stack State Role Flags ------------------ ---- ----------- ------- --- *00:04:96:6d:65:87 1 Active Master CA- 00:04:96:6d:65:6d 2 Active Backup CA- 00:04:96:8b:f5:8b 3 Active Standby CA- * - Indicates this node Flags: (C) Candidate for this active topology, (A) Active Node (O) node may be in Other active topology Stack MAC in use: 02:04:96:6d:65:87 Node Slot Alternate Alternate MAC Address Cfg Cur Prio Mgmt IP / Mask Gateway Flags Lic ------------------ --- --- ---- ------------------ --------------- --------- --- *00:04:96:6d:65:87 1 1 Auto CcEeMm-Nn -- 00:04:96:6d:65:6d 2 2 Auto CcEeMm-Nn -- 00:04:96:8b:f5:8b 3 3 Auto CcEeMm-Nn -- * - Indicates this node Flags: (C) master-Capable in use, (c) master-capable is configured, (E) Stacking is currently Enabled, (e) Stacking is configured Enabled, (M) Stack MAC in use, (m) Stack MACs configured and in use are the same, (i) Stack MACs configured and in use are not the same or unknown, (N) Enhanced protocol is in use, (n) Enhanced protocol is configured, (-) Not in use or not configured License level restrictions: (C) Core, (A) Advanced edge, or (E) Edge in use, (c) Core, (a) Advanced edge, or (e) Edge configured, (-) Not in use or not configured Do I just need 2, one for Master and the other for Backup, in case Slot 2 becomes Master? What if I want all 3 switches to be Master. Do I need to put a Core license on all 3? Thanks in advance! -B

RE: Number of Licenses Needed on Stack

PARTHIBAN_CHINN — Thu, 18 Dec 2014 20:48:00 GMT

Core license in two switches should be fine.
I just need 2, one for Master and the other for Backup, in case Slot 2 becomes Master
if there are other switches you can just disable Master capability.

RE: Number of Licenses Needed on Stack

PARTHIBAN_CHINN — Thu, 18 Dec 2014 20:49:00 GMT

Page 159 concepts guide.

Note
For successful operation, all master-capable nodes in a stack must be at or above the license
level on the master node, and all feature packs installed on the master node must also be
installed on the master-capable nodes.

RE: Number of Licenses Needed on Stack

PARTHIBAN_CHINN — Thu, 18 Dec 2014 20:50:00 GMT

I hope I have answered all of your queries.

RE: Number of Licenses Needed on Stack

bw447 — Sun, 04 Jan 2015 22:59:00 GMT

Sorry for the late reply Parthiban. You have made it crystal clear! Thanks!

RE: Number of Licenses Needed on Stack

PARTHIBAN_CHINN — Mon, 05 Jan 2015 00:00:00 GMT

Thanks for the reply and Happy New Year

RE: Number of Licenses Needed on Stack

Pos123 — Tue, 06 Oct 2015 13:52:00 GMT

Hi I have 2 switches x460-48t running on Core license and also in stack, i would like to add the 3rd switch to the stack, however this switch is running on advanced edge license. How do i proceed ? as the customer doesn't want to go for the license restriction and the core licenses are not anymore available .

Thanks

RE: Number of Licenses Needed on Stack

Drew_C — Tue, 06 Oct 2015 13:52:00 GMT

<content-quote data-username="Pos123">Hi I have 2 switches x460-48t running on Core license and also in stack, i would like to add the 3rd switch to the stack, however this switch is running on advanced edge license. How do i proceed ? as the customer doesn't want to go for the license restriction and the core licenses are not anymore available .

Thanks </content-quote>Moving to a new thread for better visibility Please reference the new conversation here: Number of Licenses Required for EXOS Stack