topic RE: Extreme X670-48t share port 45-48(Copper or Fiber) in ExtremeSwitching (Other)

Extreme X670-48t share port 45-48(Copper or Fiber)

Goh_Chern_Jie — Fri, 24 Jul 2015 15:18:00 GMT

Hi ,

Please advice,

After Stacking 2 Switches X670-48t with both switches port 47-48 with Extreme 10306 SFP+ Cable. My switch port 45 and 46 not able to working with copper connected with port 45 and 46.

Attach some config photo .

RE: Extreme X670-48t share port 45-48(Copper or Fiber)

Mel78__CISSP__E — Fri, 24 Jul 2015 16:17:00 GMT

Hi ck, hows life? Haha is it combo port?

RE: Extreme X670-48t share port 45-48(Copper or Fiber)

Goh_Chern_Jie — Fri, 24 Jul 2015 17:22:00 GMT

CJ la~~i am fine 🙂 how are you? Still at Extreme:P

It share port like the attachment. I not share whether can 47 & 48 using fiber stack and 45 & 46 using copper.

RE: Extreme X670-48t share port 45-48(Copper or Fiber)

Bill_Stritzinge — Fri, 24 Jul 2015 18:11:00 GMT

Hello,

When you stack the X670-48T, X670 or X670v-48x with SummitStack-V, ports 47,48 are stacking and ports 45 & 46 are sacrificed and not able to be used. This is because the PHY for them control 4 of the ports. When you enable stacking-support that PHY is converted to stacking and therefore not able to be used. Here are is the stacking information sheet... Please see the note on the X670 - http://documentation.extremenetworks.com/summit/Summit_Family_HW_Install/Stacking/c_using-the-summit...

NOTE: Ports 45 and 46 are not available as data ports when the alternate stacking ports are used.

Bill

RE: Extreme X670-48t share port 45-48(Copper or Fiber)

Goh_Chern_Jie — Fri, 31 Jul 2015 04:57:00 GMT

Thank you very much.