https://community.extremenetworks.com/t5/extremeswitching-other/2016-10-17-new-gtac-knowledge-articles-october-09-15-2016/m-p/12300#M3328 Here are the new articles that were published October 09 - October 15, 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, October 09, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Client-not-keeping-DHCP-address" target="_blank" rel="nofollow noreferrer noopener">Client not keeping DHCP address</A><BR /> <BR /> Monday, October 10, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-to-change-the-Report-PDF-Orientation-in-Netsight" target="_blank" rel="nofollow noreferrer noopener">How to change the Report PDF Orientation in Netsight?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-Netsight-support-tacacs-or-is-it-possible-to-log-all-commands-entered-over-ssh-session" target="_blank" rel="nofollow noreferrer noopener">Does Netsight support tacacs or is it possible to log all commands entered over ssh session</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-It-Possible-to-Bring-a-VLAN-operationally-UP-with-No-Ports-added-to-the-VLAN" target="_blank" rel="nofollow noreferrer noopener">Is It Possible to Bring a VLAN operationally UP with No Ports added to the VLAN?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-do-I-stop-repeated-message-from-scrolling-on-the-K-and-S-console" target="_blank" rel="nofollow noreferrer noopener">How do I stop repeated message from scrolling on the K and S console</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-determine-PSU-redundancy-on-S-Series" target="_blank" rel="nofollow noreferrer noopener">How to determine PSU redundancy on S-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/MAC-To-IP-Resolution-Using-DHCP-Requests-Is-Not-Working" target="_blank" rel="nofollow noreferrer noopener">MAC To IP Resolution Using DHCP Requests Is Not Working</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Execution-of-CLI-script-fails-if-try-to-create-UPM-profile-with-that-script" target="_blank" rel="nofollow noreferrer noopener">Execution of CLI script fails if try to create UPM profile with that script.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-appliance-radiusd-process-won-t-start-after-upgrade" target="_blank" rel="nofollow noreferrer noopener">NAC appliance radiusd process won't start after upgrade</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Kernel-oops-observed-when-IPv6-duplicate-address-detected-in-the-switch" target="_blank" rel="nofollow noreferrer noopener">Kernel oops observed when IPv6 duplicate address detected in the switch.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/802-1x-auth-stops-working-after-switch-firmware-upgrade" target="_blank" rel="nofollow noreferrer noopener">802.1x auth stops working after switch firmware upgrade</A><BR /> <BR /> Tuesday, October 11, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-Not-Joining-Cloud-After-Password-Configured-and-Autoexec-file-Created" target="_blank" rel="nofollow noreferrer noopener">Switch Not Joining Cloud After Password Configured and Autoexec file Created</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-SeriesError-An-internal-hardware-error-may-have-occurred-while-eading-port-counter-values-from-MAC-12" target="_blank" rel="nofollow noreferrer noopener">S-SeriesError An internal hardware error may have occurred while eading port counter values from MAC 12.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Client-cannot-connect-and-is-constantly-rejected-from-the-Controller-in-a-Mobility-Domain" target="_blank" rel="nofollow noreferrer noopener">Client cannot connect and is constantly rejected from the Controller in a Mobility Domain</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/mutlicast-checksum-error-message" target="_blank" rel="nofollow noreferrer noopener">mutlicast checksum error message " Register message from 10.3.0.157, to 10.3.0.25 failed the checksum test" continuously appearing</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Table-full-message-on-netlogin-authentication" target="_blank" rel="nofollow noreferrer noopener">Table full message on netlogin authentication</A><BR /> <BR /> Wednesday, October 12, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/XSR-Crashes-on-SSH2-Listener-Task" target="_blank" rel="nofollow noreferrer noopener">XSR Crashes on SSH2 Listener Task</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Prioritize-trafic-to-specific-Subnet-on-the-S-Series" target="_blank" rel="nofollow noreferrer noopener">How to Prioritize trafic to specific Subnet on the S-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-CIST-Role-Disabled-itself" target="_blank" rel="nofollow noreferrer noopener">Switch CIST Role Disabled itself</A><BR /> <BR /> Thursday, October 13, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/iPhone-7-shows-as-an-Unknown-Manufacturer-in-ExtremeWireless-Client-Reports" target="_blank" rel="nofollow noreferrer noopener">iPhone 7 shows as an Unknown Manufacturer in ExtremeWireless Client Reports</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Clarification-of-Multiauth-Precedence-on-the-SecureStacks" target="_blank" rel="nofollow noreferrer noopener">Clarification of Multiauth Precedence on the SecureStacks</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-connect-a-5-or-10-meter-Cooper-DAC-cable-to-the-X460-G2-Front-Panel-ports" target="_blank" rel="nofollow noreferrer noopener">Is it possible to connect a 5 or 10 meter Cooper DAC cable to the X460-G2 Front Panel ports?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Obsolete-Certificate-Message-Regarding-NAC-Agent-Legacy-Certificate" target="_blank" rel="nofollow noreferrer noopener">Obsolete Certificate Message Regarding NAC Agent Legacy Certificate</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Should-AP-marked-as-Friendly-still-show-in-Active-Threads-report" target="_blank" rel="nofollow noreferrer noopener">Should AP marked as Friendly still show in Active Threads report.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Error-message-when-trying-to-access-Rules-page-in-Siem" target="_blank" rel="nofollow noreferrer noopener">Error message when trying to access Rules page in Siem</A><BR /> <BR /> Friday, October 14, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-test-the-connection-between-a-Wireless-Controller-and-a-RADIUS-Server" target="_blank" rel="nofollow noreferrer noopener">How to test the connection between a Wireless Controller and a RADIUS Server</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Why-don-t-I-get-an-IPv6-DHCP-address-on-my-wireless-client" target="_blank" rel="nofollow noreferrer noopener">Why don't I get an IPv6 DHCP address on my wireless client?</A><BR /> <BR /> Saturday, October 15, 2016:<BR /> none Mon, 17 Oct 2016 19:51:00 GMT Ken_Thomas 2016-10-17T19:51:00Z https://community.extremenetworks.com/t5/extremeswitching-other/2016-10-17-new-gtac-knowledge-articles-october-09-15-2016/m-p/12300#M3328 Here are the new articles that were published October 09 - October 15, 2016 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, October 09, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Client-not-keeping-DHCP-address" target="_blank" rel="nofollow noreferrer noopener">Client not keeping DHCP address</A><BR /> <BR /> Monday, October 10, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-to-change-the-Report-PDF-Orientation-in-Netsight" target="_blank" rel="nofollow noreferrer noopener">How to change the Report PDF Orientation in Netsight?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-Netsight-support-tacacs-or-is-it-possible-to-log-all-commands-entered-over-ssh-session" target="_blank" rel="nofollow noreferrer noopener">Does Netsight support tacacs or is it possible to log all commands entered over ssh session</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-It-Possible-to-Bring-a-VLAN-operationally-UP-with-No-Ports-added-to-the-VLAN" target="_blank" rel="nofollow noreferrer noopener">Is It Possible to Bring a VLAN operationally UP with No Ports added to the VLAN?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-do-I-stop-repeated-message-from-scrolling-on-the-K-and-S-console" target="_blank" rel="nofollow noreferrer noopener">How do I stop repeated message from scrolling on the K and S console</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-determine-PSU-redundancy-on-S-Series" target="_blank" rel="nofollow noreferrer noopener">How to determine PSU redundancy on S-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/MAC-To-IP-Resolution-Using-DHCP-Requests-Is-Not-Working" target="_blank" rel="nofollow noreferrer noopener">MAC To IP Resolution Using DHCP Requests Is Not Working</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Execution-of-CLI-script-fails-if-try-to-create-UPM-profile-with-that-script" target="_blank" rel="nofollow noreferrer noopener">Execution of CLI script fails if try to create UPM profile with that script.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-appliance-radiusd-process-won-t-start-after-upgrade" target="_blank" rel="nofollow noreferrer noopener">NAC appliance radiusd process won't start after upgrade</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Kernel-oops-observed-when-IPv6-duplicate-address-detected-in-the-switch" target="_blank" rel="nofollow noreferrer noopener">Kernel oops observed when IPv6 duplicate address detected in the switch.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/802-1x-auth-stops-working-after-switch-firmware-upgrade" target="_blank" rel="nofollow noreferrer noopener">802.1x auth stops working after switch firmware upgrade</A><BR /> <BR /> Tuesday, October 11, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-Not-Joining-Cloud-After-Password-Configured-and-Autoexec-file-Created" target="_blank" rel="nofollow noreferrer noopener">Switch Not Joining Cloud After Password Configured and Autoexec file Created</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-SeriesError-An-internal-hardware-error-may-have-occurred-while-eading-port-counter-values-from-MAC-12" target="_blank" rel="nofollow noreferrer noopener">S-SeriesError An internal hardware error may have occurred while eading port counter values from MAC 12.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Client-cannot-connect-and-is-constantly-rejected-from-the-Controller-in-a-Mobility-Domain" target="_blank" rel="nofollow noreferrer noopener">Client cannot connect and is constantly rejected from the Controller in a Mobility Domain</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/mutlicast-checksum-error-message" target="_blank" rel="nofollow noreferrer noopener">mutlicast checksum error message " Register message from 10.3.0.157, to 10.3.0.25 failed the checksum test" continuously appearing</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Table-full-message-on-netlogin-authentication" target="_blank" rel="nofollow noreferrer noopener">Table full message on netlogin authentication</A><BR /> <BR /> Wednesday, October 12, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/XSR-Crashes-on-SSH2-Listener-Task" target="_blank" rel="nofollow noreferrer noopener">XSR Crashes on SSH2 Listener Task</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Prioritize-trafic-to-specific-Subnet-on-the-S-Series" target="_blank" rel="nofollow noreferrer noopener">How to Prioritize trafic to specific Subnet on the S-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Switch-CIST-Role-Disabled-itself" target="_blank" rel="nofollow noreferrer noopener">Switch CIST Role Disabled itself</A><BR /> <BR /> Thursday, October 13, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/iPhone-7-shows-as-an-Unknown-Manufacturer-in-ExtremeWireless-Client-Reports" target="_blank" rel="nofollow noreferrer noopener">iPhone 7 shows as an Unknown Manufacturer in ExtremeWireless Client Reports</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Clarification-of-Multiauth-Precedence-on-the-SecureStacks" target="_blank" rel="nofollow noreferrer noopener">Clarification of Multiauth Precedence on the SecureStacks</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-connect-a-5-or-10-meter-Cooper-DAC-cable-to-the-X460-G2-Front-Panel-ports" target="_blank" rel="nofollow noreferrer noopener">Is it possible to connect a 5 or 10 meter Cooper DAC cable to the X460-G2 Front Panel ports?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Obsolete-Certificate-Message-Regarding-NAC-Agent-Legacy-Certificate" target="_blank" rel="nofollow noreferrer noopener">Obsolete Certificate Message Regarding NAC Agent Legacy Certificate</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Should-AP-marked-as-Friendly-still-show-in-Active-Threads-report" target="_blank" rel="nofollow noreferrer noopener">Should AP marked as Friendly still show in Active Threads report.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Error-message-when-trying-to-access-Rules-page-in-Siem" target="_blank" rel="nofollow noreferrer noopener">Error message when trying to access Rules page in Siem</A><BR /> <BR /> Friday, October 14, 2016:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-test-the-connection-between-a-Wireless-Controller-and-a-RADIUS-Server" target="_blank" rel="nofollow noreferrer noopener">How to test the connection between a Wireless Controller and a RADIUS Server</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Why-don-t-I-get-an-IPv6-DHCP-address-on-my-wireless-client" target="_blank" rel="nofollow noreferrer noopener">Why don't I get an IPv6 DHCP address on my wireless client?</A><BR /> <BR /> Saturday, October 15, 2016:<BR /> none Mon, 17 Oct 2016 19:51:00 GMT https://community.extremenetworks.com/t5/extremeswitching-other/2016-10-17-new-gtac-knowledge-articles-october-09-15-2016/m-p/12300#M3328 Ken_Thomas 2016-10-17T19:51:00Z