https://community.extremenetworks.com/t5/extremeswitching-other/hw-problems-with-b5g124-48/m-p/74722#M3784 <P>Hello,</P><P>&nbsp;</P><P>We have a stack with B5G124-48 switches and we have some problems with hardware. One switch of them is resetting continuosly and in other switch, I think that some ports are bad because the switch run OK, leds OK but when connect the cable, the port is OFF.</P><P>&nbsp;</P><P>Is there any way to pass a checking procedure of hardware?</P><P>Thanks in advance!!!</P><P>Best regards,</P><P>Igor</P> Tue, 22 Oct 2019 15:23:54 GMT Igor_GF_ 2019-10-22T15:23:54Z https://community.extremenetworks.com/t5/extremeswitching-other/hw-problems-with-b5g124-48/m-p/74722#M3784 <P>Hello,</P><P>&nbsp;</P><P>We have a stack with B5G124-48 switches and we have some problems with hardware. One switch of them is resetting continuosly and in other switch, I think that some ports are bad because the switch run OK, leds OK but when connect the cable, the port is OFF.</P><P>&nbsp;</P><P>Is there any way to pass a checking procedure of hardware?</P><P>Thanks in advance!!!</P><P>Best regards,</P><P>Igor</P> Tue, 22 Oct 2019 15:23:54 GMT https://community.extremenetworks.com/t5/extremeswitching-other/hw-problems-with-b5g124-48/m-p/74722#M3784 Igor_GF_ 2019-10-22T15:23:54Z