https://community.extremenetworks.com/t5/extremeswitching-other/2017-11-27-new-gtac-knowledge-articles-november-12-25-2017/m-p/9356#M384 Here are the new articles that were published November 12 - November 25, 2017 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, November 12, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-switch-for-Phone-Data-using-Extreme-Access-Control" target="_blank" rel="nofollow noreferrer noopener">How to configure switch for Phone + Data using Extreme Access Control</A><BR /> <BR /> Monday, November 13, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-many-ESRP-slaves-does-EXOS-support" target="_blank" rel="nofollow noreferrer noopener">How many ESRP slaves does EXOS support?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Issue-with-reports-not-loading-in-ExtremeManagement-ExtremeWireless-GUI-slow-to-respond-to-Report-Generation-or-configuration-updates" target="_blank" rel="nofollow noreferrer noopener">Issue with reports not loading in ExtremeManagement; ExtremeWireless GUI slow to respond to Report Generation or configuration updates.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Install-Extreme-Management-Center-8-0" target="_blank" rel="nofollow noreferrer noopener">How to Install Extreme Management Center 8.0</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Change-the-Name-of-an-Access-Point" target="_blank" rel="nofollow noreferrer noopener">How to Change the Name of an Access Point</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-disconnect-client-from-CLI" target="_blank" rel="nofollow noreferrer noopener">How to disconnect client from WLAN via CLI?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-there-a-Mib-for-the-Show-Fdb-Command" target="_blank" rel="nofollow noreferrer noopener">Is there a Mib for the Show Fdb Command?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-new-Web-Portal-Account" target="_blank" rel="nofollow noreferrer noopener">How to create new Web Portal Account</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-Active-Authenticated-End-System-report-is-incorrect-after-NAC-process-restart-sbin-nacctl-restart" target="_blank" rel="nofollow noreferrer noopener">NAC Active Authenticated End-System report is incorrect after NAC process restart /sbin/nacctl restart</A><BR /> <BR /> Tuesday, November 14, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Will-an-S4-db9-to-rj45-cable-work-on-an-Exos-device" target="_blank" rel="nofollow noreferrer noopener">Will an S4 db9 to rj45 cable work on an Exos device?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-are-the-Admin-Web-Page-Credentials-for-Extreme-Control-NAC" target="_blank" rel="nofollow noreferrer noopener">Where are the Admin Web Page Credentials for Extreme Control (NAC)</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/After-Upgrading-to-10-41-01-code-AP3825-started-crashing" target="_blank" rel="nofollow noreferrer noopener">After Upgrading to 10.41.01 code AP3825 started crashing</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Firmware-upgrade-fails-on-EXOS-switches-when-using-SCP-and-Extreme-Management-Center" target="_blank" rel="nofollow noreferrer noopener">Firmware upgrade fails on EXOS switches when using SCP and Extreme Management Center</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-recreate-a-RAID-disk-on-NX9500-NX9600" target="_blank" rel="nofollow noreferrer noopener">How to recreate a RAID disk on NX9500/NX9600</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/With-alternate-IP-configured-MLAG-ports-are-getting-disabled-when-other-MLAG-peer-comes-Up-after-reboot" target="_blank" rel="nofollow noreferrer noopener">With alternate IP configured, MLAG ports may be disabled momentarily when other MLAG peer comes Up after reboot</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-does-LED-blinking-means-on-AP650" target="_blank" rel="nofollow noreferrer noopener">What does LED blinking means on AP650?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/SNMP-Object-extremePowerSupplyTable-not-available-in-22-3-1-4" target="_blank" rel="nofollow noreferrer noopener">SNMP Object "extremePowerSupplyTable" not available in 22.3.1.4</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/WING-how-to-setup-rate-limit-per-Wireless-LAN" target="_blank" rel="nofollow noreferrer noopener">WING: how to setup rate limit per Wireless LAN</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-setup-wireless-client-rate-limit" target="_blank" rel="nofollow noreferrer noopener">WING: How to setup rate limit per wireless client</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-Elastic-Storage-feature" target="_blank" rel="nofollow noreferrer noopener">What is Elastic Storage feature?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/CVE-2017-15361" target="_blank" rel="nofollow noreferrer noopener">CVE-2017-15361</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-there-an-option-to-specify-source-IP-in-TFTP-command" target="_blank" rel="nofollow noreferrer noopener">Is there an option to specify source IP in TFTP command</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-doesn-t-write-RADIUS-configuration-on-enforce-for-switch" target="_blank" rel="nofollow noreferrer noopener">NAC doesn't write RADIUS configuration on enforce for switch</A><BR /> <BR /> Wednesday, November 15, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Configure-BGP-Multihop-on-S-Series" target="_blank" rel="nofollow noreferrer noopener">How To Configure BGP Multihop on S-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-disable-the-DOSATTACK-IPSPOOF-ATTACK-message-on-a-WiNG-AP" target="_blank" rel="nofollow noreferrer noopener">How to disable the DOSATTACK: IPSPOOF ATTACK message on a WiNG AP</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-secondary-IP-address-on-routed-interface-for-Modular-EOS-Routers" target="_blank" rel="nofollow noreferrer noopener">How to configure a secondary IP address on routed interface for Modular EOS Routers</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Design-Considerations-when-using-EXOS-MLAG" target="_blank" rel="nofollow noreferrer noopener">Design Considerations when using EXOS MLAG to connect to EOS stp enabled switches</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-After-rebooting-the-switch-the-ip-ospf-network-point-to-point-command-is-missing-from-the-config-for-non-default-VRFs" target="_blank" rel="nofollow noreferrer noopener">S-Series : After rebooting the switch the "ip ospf network point-to-point" command is missing from the config for non default VRFs</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/AP622-failed-to-broadcast-SSID-after-upgrading-to-5-9-0-2" target="_blank" rel="nofollow noreferrer noopener">AP622 failed to broadcast SSID after upgrading to 5.9.0.2</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-install-and-use-an-IA-ES-key-on-your-Extreme-Access-Control-appliances" target="_blank" rel="nofollow noreferrer noopener">How to install and use an IA-ES key on your Extreme Access Control appliances</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/800-Series-Not-passing-traffic-intermittently" target="_blank" rel="nofollow noreferrer noopener">800-Series : Not passing traffic intermittently</A><BR /> <BR /> Thursday, November 16, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Clients-are-presented-with-the-Portal-Splash-page-upon-roaming-to-another-Access-Point-in-an-Extreme-Cloud-Wireless-network" target="_blank" rel="nofollow noreferrer noopener">Clients are presented with the Portal Splash page upon roaming to another Access Point in an Extreme Cloud Wireless network</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/After-roaming-between-two-APs-in-the-Extreme-Cloud-Wireless-network-the-end-client-devices-are-presented-with-an-untrusted-certificate-pop-up-page" target="_blank" rel="nofollow noreferrer noopener">After roaming between two APs in the Extreme Cloud Wireless network, the end client devices are presented with an untrusted certificate pop-up page.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Unconfigure-Rate-Limit-of-a-Port-of-an-EXOS-Switch" target="_blank" rel="nofollow noreferrer noopener">How to Unconfigure Rate-Limit of a Port of an EXOS Switch</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/B-C-G-Series-attempt-to-create-L3-Interface-results-in-Could-not-Create-Vlan-Interface-error" target="_blank" rel="nofollow noreferrer noopener">B/C/G-Series attempt to create L3 Interface results in "Could not Create Vlan Interface" error</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Port-is-link-down-unexpectedly" target="_blank" rel="nofollow noreferrer noopener">Port is link down unexpectedly</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Gather-serial-number-information-from-devices-in-Extreme-Management-Center" target="_blank" rel="nofollow noreferrer noopener">How to Gather serial number information from devices in Extreme Management Center</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Clear-a-Unit-In-SecureStack-Showing-Not-Present" target="_blank" rel="nofollow noreferrer noopener">How to Clear a Unit In SecureStack Showing Not Present</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-SSH-on-a-200-Series-switch" target="_blank" rel="nofollow noreferrer noopener">How to enable SSH on a 200 Series switch</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/AP-log-shows-WAL-DBGID-AST-ENTRY-FULL-and-WAL-DBGID-AST-WDS-SRC-LEARN-FAIL" target="_blank" rel="nofollow noreferrer noopener">AP log shows WAL_DBGID_AST_ENTRY_FULL and WAL_DBGID_AST_WDS_SRC_LEARN_FAIL</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Packets-that-ingresses-particular-MLAG-port-is-not-egressing-another-MLAG-port" target="_blank" rel="nofollow noreferrer noopener">Packets that ingresses particular MLAG port is not egressing another MLAG port.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Check-for-Extreme-Management-Center-Updates" target="_blank" rel="nofollow noreferrer noopener">How to Check for Extreme Management Center Updates</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Links-between-EXOS-and-EOS-switches-are-missing-in-EMC" target="_blank" rel="nofollow noreferrer noopener">Links between EXOS and EOS switches are missing in EMC</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Airflow-Requirements-for-Black-Diamond-8000-series-switch" target="_blank" rel="nofollow noreferrer noopener">Airflow Requirements for Black Diamond 8000 series switch</A><BR /> <BR /> Friday, November 17, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Purview-can-reports-be-created-against-specific-APs" target="_blank" rel="nofollow noreferrer noopener">Purview - can reports be created against specific APs</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-Difference-Between-K-AC-PS-and-K-AC-PS-1400W" target="_blank" rel="nofollow noreferrer noopener">What is the Difference Between K-AC-PS and K-AC-PS-1400W?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-OSPF-routes-to-be-protected-by-BFD" target="_blank" rel="nofollow noreferrer noopener">How to configure OSPF routes to be protected by BFD?</A><BR /> <BR /> Saturday, November 18, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-send-port-display-string-in-SNMP-inform-packet" target="_blank" rel="nofollow noreferrer noopener">How to send port display string in SNMP inform packet</A><BR /> <BR /> Sunday, November 19, 2017:<BR /> none<BR /> <BR /> Monday, November 20, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/10-Gig-Connection-on-C5K-not-working" target="_blank" rel="nofollow noreferrer noopener">10 Gig Connection on C5K not working</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/diffie-hellman-group1-sha1-dispalyed-in-SSH-client" target="_blank" rel="nofollow noreferrer noopener">With SSH enabled in EXOS, client displays "no matching key exchange method found. Their offer: diffie-hellman-group1-sha1"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Multicast-Streams-Getting-Dropped-on-Extreme-200-Series" target="_blank" rel="nofollow noreferrer noopener">Multicast Streams Getting Dropped on ExtremeSwitching 200 Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Kernel-crash-occurs-when-processing-a-IGMP-packet-with-an-invalid-IP-header-length" target="_blank" rel="nofollow noreferrer noopener">Kernel crash occurs when processing a IGMP packet with an invalid IP header length</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/After-ESRP-failover-L2VPN-session-remain-in-signaling-state-with-ESRP-VPLS-redundancy-enabled" target="_blank" rel="nofollow noreferrer noopener">After ESRP failover L2VPN session remain in signaling state with ESRP VPLS redundancy enabled</A><BR /> <BR /> Tuesday, November 21, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Brocade-Support-Integration-End-User-FAQ" target="_blank" rel="nofollow noreferrer noopener">Brocade Support Integration End User FAQ</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IdentiFi-Controller-with-error-message-Apply-product-key-failed-Permanent-license-is-not-allowed" target="_blank" rel="nofollow noreferrer noopener">IdentiFi Controller with error message "Apply product key failed: Permanent license is not allowed."</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-are-custom-FlexView-files-saved-on-server" target="_blank" rel="nofollow noreferrer noopener">Where are custom FlexView files saved on server?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-to-Connect-the-Antenna-DQ04360N-to-an-AP3965e" target="_blank" rel="nofollow noreferrer noopener">How to Connect the Antenna DQ04360N to an AP3965e</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-Displays-Conflicting-HAU-Output-between-Show-Config-Boot-and-Show-Boot-High" target="_blank" rel="nofollow noreferrer noopener">S-Series Displays Conflicting HAU Output between "Show Config Boot" and "Show Boot High"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Two-AP3620-Access-Points-in-a-WDS-setup-are-performing-poorly-and-much-lower-Rx-and-Tx-rates-than-similar-WDS-Mesh-configurations-in-the-same-network" target="_blank" rel="nofollow noreferrer noopener">Two AP3620 Access Points in a WDS setup are performing poorly, and much lower Rx and Tx rates than similar WDS/Mesh configurations in the same network.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-AirDefense-Mobile-cannot-connect-to-ADSP" target="_blank" rel="nofollow noreferrer noopener">Why AirDefense Mobile cannot connect to ADSP?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Set-Webview-to-Use-SSL-on-SecureStack" target="_blank" rel="nofollow noreferrer noopener">How to Set Webview to Use SSL on SecureStack</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Disable-Telnet-and-Enable-SSH-on-Securestack" target="_blank" rel="nofollow noreferrer noopener">How to Disable Telnet and Enable SSH on Securestack</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-controller-is-not-adopting-APs-with-message-cfgd-is-unable-to-adopt" target="_blank" rel="nofollow noreferrer noopener">Why controller is not adopting APs with message "cfgd is unable to adopt"?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-check-from-the-WING-infrastructure-side-if-a-client-supports-the-higher-IEEE-channels-UNII-2-UNII-2-EXT-UNII-3-ISM" target="_blank" rel="nofollow noreferrer noopener">Is it possible to check, from the WING-infrastructure side, if a client supports the higher IEEE channels (UNII-2, UNII-2-EXT, UNII-3/ISM)?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-EXOS-flush-FDBs-in-protected-VLANs-if-additional-protected-VLAN-is-added-to-EAPS-domain" target="_blank" rel="nofollow noreferrer noopener">Does EXOS flush FDBs in protected VLANs if additional protected VLAN is added to EAPS domain?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/High-CPU-utilization-in-the-switch-after-re-creating-an-existing-sharing-group" target="_blank" rel="nofollow noreferrer noopener">High CPU utilization in the switch after re-creating an existing sharing group</A><BR /> <BR /> Wednesday, November 22, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-does-a-port-status-of-Dormant-indicate" target="_blank" rel="nofollow noreferrer noopener">What does a port status of "Dormant" indicate?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Memory-leak-in-process-policy" target="_blank" rel="nofollow noreferrer noopener">Memory leak in process policy</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/AP2610-20-Enterasys-Siemens-serial-numbers" target="_blank" rel="nofollow noreferrer noopener">AP2610/20 Enterasys Siemens serial numbers</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-is-possible-to-enable-LLDP-on-the-management-port" target="_blank" rel="nofollow noreferrer noopener">Is is possible to enable LLDP on the management port?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/EXOS-returns-NAK-for-a-Radius-Disconnect-Request" target="_blank" rel="nofollow noreferrer noopener">EXOS returns NAK for a Radius Disconnect Request</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Communication-loss-between-the-end-hosts-connected-via-VPLS-connection-after-adding-a-new-port-to-the-sharing-group" target="_blank" rel="nofollow noreferrer noopener">Communication loss between the end hosts connected via VPLS connection after adding a new port to the sharing group</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Packets-are-not-being-forwarded-after-disabling-enabling-LAG-ports-in-VPWS" target="_blank" rel="nofollow noreferrer noopener">Packets are not being forwarded after disabling/enabling LAG ports in VPWS</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/MPLS-RSVP-TE-LSP-load-sharing-not-working" target="_blank" rel="nofollow noreferrer noopener">MPLS RSVP-TE LSP load sharing not working</A><BR /> <BR /> Thursday, November 23, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Equivalent-Isotropic-Radiated-Power-EIRP-for-the-AP3965i-is-much-lesser-than-for-AP3865e" target="_blank" rel="nofollow noreferrer noopener">Equivalent Isotropic Radiated Power EIRP for the AP3965i is much lesser than for AP3865e</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Given-key-is-not-a-valid-encrypted-key-Please-provide-a-valid-encrypted-key-that-is-encrypted-by-the-switch" target="_blank" rel="nofollow noreferrer noopener">Given key is not a valid encrypted key. Please provide a valid encrypted key that is encrypted by the switch.</A><BR /> <BR /> Friday, November 24, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/The-uploaded-firmware-image-is-invalid-Please-use-a-correct-firmware-image" target="_blank" rel="nofollow noreferrer noopener">Why do we get the following message in the ISW switches - The uploaded firmware image is invalid. Please use a correct firmware image</A><BR /> <BR /> Saturday, November 25, 2017:<BR /> none Mon, 27 Nov 2017 22:16:00 GMT Ken_Thomas 2017-11-27T22:16:00Z https://community.extremenetworks.com/t5/extremeswitching-other/2017-11-27-new-gtac-knowledge-articles-november-12-25-2017/m-p/9356#M384 Here are the new articles that were published November 12 - November 25, 2017 in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, November 12, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-switch-for-Phone-Data-using-Extreme-Access-Control" target="_blank" rel="nofollow noreferrer noopener">How to configure switch for Phone + Data using Extreme Access Control</A><BR /> <BR /> Monday, November 13, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-many-ESRP-slaves-does-EXOS-support" target="_blank" rel="nofollow noreferrer noopener">How many ESRP slaves does EXOS support?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Issue-with-reports-not-loading-in-ExtremeManagement-ExtremeWireless-GUI-slow-to-respond-to-Report-Generation-or-configuration-updates" target="_blank" rel="nofollow noreferrer noopener">Issue with reports not loading in ExtremeManagement; ExtremeWireless GUI slow to respond to Report Generation or configuration updates.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Install-Extreme-Management-Center-8-0" target="_blank" rel="nofollow noreferrer noopener">How to Install Extreme Management Center 8.0</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Change-the-Name-of-an-Access-Point" target="_blank" rel="nofollow noreferrer noopener">How to Change the Name of an Access Point</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-disconnect-client-from-CLI" target="_blank" rel="nofollow noreferrer noopener">How to disconnect client from WLAN via CLI?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-there-a-Mib-for-the-Show-Fdb-Command" target="_blank" rel="nofollow noreferrer noopener">Is there a Mib for the Show Fdb Command?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-new-Web-Portal-Account" target="_blank" rel="nofollow noreferrer noopener">How to create new Web Portal Account</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-Active-Authenticated-End-System-report-is-incorrect-after-NAC-process-restart-sbin-nacctl-restart" target="_blank" rel="nofollow noreferrer noopener">NAC Active Authenticated End-System report is incorrect after NAC process restart /sbin/nacctl restart</A><BR /> <BR /> Tuesday, November 14, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Will-an-S4-db9-to-rj45-cable-work-on-an-Exos-device" target="_blank" rel="nofollow noreferrer noopener">Will an S4 db9 to rj45 cable work on an Exos device?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-are-the-Admin-Web-Page-Credentials-for-Extreme-Control-NAC" target="_blank" rel="nofollow noreferrer noopener">Where are the Admin Web Page Credentials for Extreme Control (NAC)</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/After-Upgrading-to-10-41-01-code-AP3825-started-crashing" target="_blank" rel="nofollow noreferrer noopener">After Upgrading to 10.41.01 code AP3825 started crashing</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Firmware-upgrade-fails-on-EXOS-switches-when-using-SCP-and-Extreme-Management-Center" target="_blank" rel="nofollow noreferrer noopener">Firmware upgrade fails on EXOS switches when using SCP and Extreme Management Center</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-recreate-a-RAID-disk-on-NX9500-NX9600" target="_blank" rel="nofollow noreferrer noopener">How to recreate a RAID disk on NX9500/NX9600</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/With-alternate-IP-configured-MLAG-ports-are-getting-disabled-when-other-MLAG-peer-comes-Up-after-reboot" target="_blank" rel="nofollow noreferrer noopener">With alternate IP configured, MLAG ports may be disabled momentarily when other MLAG peer comes Up after reboot</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-does-LED-blinking-means-on-AP650" target="_blank" rel="nofollow noreferrer noopener">What does LED blinking means on AP650?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/SNMP-Object-extremePowerSupplyTable-not-available-in-22-3-1-4" target="_blank" rel="nofollow noreferrer noopener">SNMP Object "extremePowerSupplyTable" not available in 22.3.1.4</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/WING-how-to-setup-rate-limit-per-Wireless-LAN" target="_blank" rel="nofollow noreferrer noopener">WING: how to setup rate limit per Wireless LAN</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-setup-wireless-client-rate-limit" target="_blank" rel="nofollow noreferrer noopener">WING: How to setup rate limit per wireless client</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-Elastic-Storage-feature" target="_blank" rel="nofollow noreferrer noopener">What is Elastic Storage feature?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/CVE-2017-15361" target="_blank" rel="nofollow noreferrer noopener">CVE-2017-15361</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-there-an-option-to-specify-source-IP-in-TFTP-command" target="_blank" rel="nofollow noreferrer noopener">Is there an option to specify source IP in TFTP command</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-doesn-t-write-RADIUS-configuration-on-enforce-for-switch" target="_blank" rel="nofollow noreferrer noopener">NAC doesn't write RADIUS configuration on enforce for switch</A><BR /> <BR /> Wednesday, November 15, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Configure-BGP-Multihop-on-S-Series" target="_blank" rel="nofollow noreferrer noopener">How To Configure BGP Multihop on S-Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-disable-the-DOSATTACK-IPSPOOF-ATTACK-message-on-a-WiNG-AP" target="_blank" rel="nofollow noreferrer noopener">How to disable the DOSATTACK: IPSPOOF ATTACK message on a WiNG AP</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-secondary-IP-address-on-routed-interface-for-Modular-EOS-Routers" target="_blank" rel="nofollow noreferrer noopener">How to configure a secondary IP address on routed interface for Modular EOS Routers</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Design-Considerations-when-using-EXOS-MLAG" target="_blank" rel="nofollow noreferrer noopener">Design Considerations when using EXOS MLAG to connect to EOS stp enabled switches</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-After-rebooting-the-switch-the-ip-ospf-network-point-to-point-command-is-missing-from-the-config-for-non-default-VRFs" target="_blank" rel="nofollow noreferrer noopener">S-Series : After rebooting the switch the "ip ospf network point-to-point" command is missing from the config for non default VRFs</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/AP622-failed-to-broadcast-SSID-after-upgrading-to-5-9-0-2" target="_blank" rel="nofollow noreferrer noopener">AP622 failed to broadcast SSID after upgrading to 5.9.0.2</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-install-and-use-an-IA-ES-key-on-your-Extreme-Access-Control-appliances" target="_blank" rel="nofollow noreferrer noopener">How to install and use an IA-ES key on your Extreme Access Control appliances</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/800-Series-Not-passing-traffic-intermittently" target="_blank" rel="nofollow noreferrer noopener">800-Series : Not passing traffic intermittently</A><BR /> <BR /> Thursday, November 16, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Clients-are-presented-with-the-Portal-Splash-page-upon-roaming-to-another-Access-Point-in-an-Extreme-Cloud-Wireless-network" target="_blank" rel="nofollow noreferrer noopener">Clients are presented with the Portal Splash page upon roaming to another Access Point in an Extreme Cloud Wireless network</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/After-roaming-between-two-APs-in-the-Extreme-Cloud-Wireless-network-the-end-client-devices-are-presented-with-an-untrusted-certificate-pop-up-page" target="_blank" rel="nofollow noreferrer noopener">After roaming between two APs in the Extreme Cloud Wireless network, the end client devices are presented with an untrusted certificate pop-up page.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Unconfigure-Rate-Limit-of-a-Port-of-an-EXOS-Switch" target="_blank" rel="nofollow noreferrer noopener">How to Unconfigure Rate-Limit of a Port of an EXOS Switch</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/B-C-G-Series-attempt-to-create-L3-Interface-results-in-Could-not-Create-Vlan-Interface-error" target="_blank" rel="nofollow noreferrer noopener">B/C/G-Series attempt to create L3 Interface results in "Could not Create Vlan Interface" error</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Port-is-link-down-unexpectedly" target="_blank" rel="nofollow noreferrer noopener">Port is link down unexpectedly</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Gather-serial-number-information-from-devices-in-Extreme-Management-Center" target="_blank" rel="nofollow noreferrer noopener">How to Gather serial number information from devices in Extreme Management Center</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Clear-a-Unit-In-SecureStack-Showing-Not-Present" target="_blank" rel="nofollow noreferrer noopener">How to Clear a Unit In SecureStack Showing Not Present</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-SSH-on-a-200-Series-switch" target="_blank" rel="nofollow noreferrer noopener">How to enable SSH on a 200 Series switch</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/AP-log-shows-WAL-DBGID-AST-ENTRY-FULL-and-WAL-DBGID-AST-WDS-SRC-LEARN-FAIL" target="_blank" rel="nofollow noreferrer noopener">AP log shows WAL_DBGID_AST_ENTRY_FULL and WAL_DBGID_AST_WDS_SRC_LEARN_FAIL</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Packets-that-ingresses-particular-MLAG-port-is-not-egressing-another-MLAG-port" target="_blank" rel="nofollow noreferrer noopener">Packets that ingresses particular MLAG port is not egressing another MLAG port.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Check-for-Extreme-Management-Center-Updates" target="_blank" rel="nofollow noreferrer noopener">How to Check for Extreme Management Center Updates</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Links-between-EXOS-and-EOS-switches-are-missing-in-EMC" target="_blank" rel="nofollow noreferrer noopener">Links between EXOS and EOS switches are missing in EMC</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Airflow-Requirements-for-Black-Diamond-8000-series-switch" target="_blank" rel="nofollow noreferrer noopener">Airflow Requirements for Black Diamond 8000 series switch</A><BR /> <BR /> Friday, November 17, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Purview-can-reports-be-created-against-specific-APs" target="_blank" rel="nofollow noreferrer noopener">Purview - can reports be created against specific APs</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-Difference-Between-K-AC-PS-and-K-AC-PS-1400W" target="_blank" rel="nofollow noreferrer noopener">What is the Difference Between K-AC-PS and K-AC-PS-1400W?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-OSPF-routes-to-be-protected-by-BFD" target="_blank" rel="nofollow noreferrer noopener">How to configure OSPF routes to be protected by BFD?</A><BR /> <BR /> Saturday, November 18, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-send-port-display-string-in-SNMP-inform-packet" target="_blank" rel="nofollow noreferrer noopener">How to send port display string in SNMP inform packet</A><BR /> <BR /> Sunday, November 19, 2017:<BR /> none<BR /> <BR /> Monday, November 20, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/10-Gig-Connection-on-C5K-not-working" target="_blank" rel="nofollow noreferrer noopener">10 Gig Connection on C5K not working</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/diffie-hellman-group1-sha1-dispalyed-in-SSH-client" target="_blank" rel="nofollow noreferrer noopener">With SSH enabled in EXOS, client displays "no matching key exchange method found. Their offer: diffie-hellman-group1-sha1"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Multicast-Streams-Getting-Dropped-on-Extreme-200-Series" target="_blank" rel="nofollow noreferrer noopener">Multicast Streams Getting Dropped on ExtremeSwitching 200 Series</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Kernel-crash-occurs-when-processing-a-IGMP-packet-with-an-invalid-IP-header-length" target="_blank" rel="nofollow noreferrer noopener">Kernel crash occurs when processing a IGMP packet with an invalid IP header length</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/After-ESRP-failover-L2VPN-session-remain-in-signaling-state-with-ESRP-VPLS-redundancy-enabled" target="_blank" rel="nofollow noreferrer noopener">After ESRP failover L2VPN session remain in signaling state with ESRP VPLS redundancy enabled</A><BR /> <BR /> Tuesday, November 21, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Brocade-Support-Integration-End-User-FAQ" target="_blank" rel="nofollow noreferrer noopener">Brocade Support Integration End User FAQ</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IdentiFi-Controller-with-error-message-Apply-product-key-failed-Permanent-license-is-not-allowed" target="_blank" rel="nofollow noreferrer noopener">IdentiFi Controller with error message "Apply product key failed: Permanent license is not allowed."</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-are-custom-FlexView-files-saved-on-server" target="_blank" rel="nofollow noreferrer noopener">Where are custom FlexView files saved on server?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/How-to-Connect-the-Antenna-DQ04360N-to-an-AP3965e" target="_blank" rel="nofollow noreferrer noopener">How to Connect the Antenna DQ04360N to an AP3965e</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-Displays-Conflicting-HAU-Output-between-Show-Config-Boot-and-Show-Boot-High" target="_blank" rel="nofollow noreferrer noopener">S-Series Displays Conflicting HAU Output between "Show Config Boot" and "Show Boot High"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Two-AP3620-Access-Points-in-a-WDS-setup-are-performing-poorly-and-much-lower-Rx-and-Tx-rates-than-similar-WDS-Mesh-configurations-in-the-same-network" target="_blank" rel="nofollow noreferrer noopener">Two AP3620 Access Points in a WDS setup are performing poorly, and much lower Rx and Tx rates than similar WDS/Mesh configurations in the same network.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-AirDefense-Mobile-cannot-connect-to-ADSP" target="_blank" rel="nofollow noreferrer noopener">Why AirDefense Mobile cannot connect to ADSP?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Set-Webview-to-Use-SSL-on-SecureStack" target="_blank" rel="nofollow noreferrer noopener">How to Set Webview to Use SSL on SecureStack</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Disable-Telnet-and-Enable-SSH-on-Securestack" target="_blank" rel="nofollow noreferrer noopener">How to Disable Telnet and Enable SSH on Securestack</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-controller-is-not-adopting-APs-with-message-cfgd-is-unable-to-adopt" target="_blank" rel="nofollow noreferrer noopener">Why controller is not adopting APs with message "cfgd is unable to adopt"?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-check-from-the-WING-infrastructure-side-if-a-client-supports-the-higher-IEEE-channels-UNII-2-UNII-2-EXT-UNII-3-ISM" target="_blank" rel="nofollow noreferrer noopener">Is it possible to check, from the WING-infrastructure side, if a client supports the higher IEEE channels (UNII-2, UNII-2-EXT, UNII-3/ISM)?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-EXOS-flush-FDBs-in-protected-VLANs-if-additional-protected-VLAN-is-added-to-EAPS-domain" target="_blank" rel="nofollow noreferrer noopener">Does EXOS flush FDBs in protected VLANs if additional protected VLAN is added to EAPS domain?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/High-CPU-utilization-in-the-switch-after-re-creating-an-existing-sharing-group" target="_blank" rel="nofollow noreferrer noopener">High CPU utilization in the switch after re-creating an existing sharing group</A><BR /> <BR /> Wednesday, November 22, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-does-a-port-status-of-Dormant-indicate" target="_blank" rel="nofollow noreferrer noopener">What does a port status of "Dormant" indicate?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Memory-leak-in-process-policy" target="_blank" rel="nofollow noreferrer noopener">Memory leak in process policy</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/AP2610-20-Enterasys-Siemens-serial-numbers" target="_blank" rel="nofollow noreferrer noopener">AP2610/20 Enterasys Siemens serial numbers</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-is-possible-to-enable-LLDP-on-the-management-port" target="_blank" rel="nofollow noreferrer noopener">Is is possible to enable LLDP on the management port?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/EXOS-returns-NAK-for-a-Radius-Disconnect-Request" target="_blank" rel="nofollow noreferrer noopener">EXOS returns NAK for a Radius Disconnect Request</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Communication-loss-between-the-end-hosts-connected-via-VPLS-connection-after-adding-a-new-port-to-the-sharing-group" target="_blank" rel="nofollow noreferrer noopener">Communication loss between the end hosts connected via VPLS connection after adding a new port to the sharing group</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Packets-are-not-being-forwarded-after-disabling-enabling-LAG-ports-in-VPWS" target="_blank" rel="nofollow noreferrer noopener">Packets are not being forwarded after disabling/enabling LAG ports in VPWS</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/MPLS-RSVP-TE-LSP-load-sharing-not-working" target="_blank" rel="nofollow noreferrer noopener">MPLS RSVP-TE LSP load sharing not working</A><BR /> <BR /> Thursday, November 23, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Equivalent-Isotropic-Radiated-Power-EIRP-for-the-AP3965i-is-much-lesser-than-for-AP3865e" target="_blank" rel="nofollow noreferrer noopener">Equivalent Isotropic Radiated Power EIRP for the AP3965i is much lesser than for AP3865e</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Given-key-is-not-a-valid-encrypted-key-Please-provide-a-valid-encrypted-key-that-is-encrypted-by-the-switch" target="_blank" rel="nofollow noreferrer noopener">Given key is not a valid encrypted key. Please provide a valid encrypted key that is encrypted by the switch.</A><BR /> <BR /> Friday, November 24, 2017:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/The-uploaded-firmware-image-is-invalid-Please-use-a-correct-firmware-image" target="_blank" rel="nofollow noreferrer noopener">Why do we get the following message in the ISW switches - The uploaded firmware image is invalid. Please use a correct firmware image</A><BR /> <BR /> Saturday, November 25, 2017:<BR /> none Mon, 27 Nov 2017 22:16:00 GMT https://community.extremenetworks.com/t5/extremeswitching-other/2017-11-27-new-gtac-knowledge-articles-november-12-25-2017/m-p/9356#M384 Ken_Thomas 2017-11-27T22:16:00Z