topic Re: Extreme 210 in ExtremeSwitching (Other)

Extreme 210

Vitaliy — Thu, 03 Dec 2020 21:22:24 GMT

I can't configure SNMP, tried all sorts of options, downloaded MIB, as a result, a complete zero. The switchboard does not provide any information. What could be the reason?

Community-String Community-Access View Name IP Address
-------------------- ---------------- ---------------- ----------------
public Read Only public 10.10.10.12

Community-String Group Name IP Address
-------------------- ------------------------------ ----------------
public public All

Traps are enabled.
Authentication trap is enabled.

Version 1,2 notifications
Target Address Type Community Version UDP Filter TO Retries
Port name Sec
---------------- ------- -------------------- ------- ------ -------- --- ------
10.10.10.12 Trap public 2 162
10.10.3.12 Inform public 2 162 15 3

Version 3 notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port name Sec
---------------- ------- ------------------ -------- ------ -------- --- -------

Re: Extreme 210

SamPirok — Thu, 03 Dec 2020 22:20:52 GMT

Hello, this guide has an SNMP set up section that should help you get SNMP up and running: https://documentation.extremenetworks.com/200_commands/GUID-C7B5110C-BC4C-4222-BFA1-E716B7F3EFDC.shtml

Re: Extreme 210

Vitaliy — Thu, 03 Dec 2020 23:04:14 GMT

I didn't ask you to poke me in the manual, I saw it, I have it before my eyes, better tell me what I'm doing wrong?

Re: Extreme 210

Vitaliy — Tue, 08 Dec 2020 03:27:36 GMT

Someone can show in a working example how to configure Extreme 210 snmp, because I can't do anything I set up different devices from different manufacturers, but this switch was too much for me.

Re: Extreme 210

Vitaliy — Thu, 10 Dec 2020 04:03:07 GMT

Suddenly someone will need it, so that they don't suffer like me.

(Extreme 210) >en

(Extreme 210) #configure

(Extreme 210) (Config)#snmp-server group "public" v2 read "Default" write "Default"

(Extreme 210) (Config)#snmp-server community-group "public" "public"

(Extreme 210) (Config)#write memory confirm