How to configure uplink port in summit x460-48p

sangam — Fri, 12 May 2023 16:03:08 GMT

Hi Everyone,

I am new in networking, i am trying to configured port on Extreme Switch summit x460 with brocade switch icx7750-48. i created lag ports in my core switch(icx7750-48) and those cable connected with my Extreme switch x460 on port 49 to 52 also created lag port in Extreme switch. But connection is not working.

lag configuration on extreme switch as follow :

Lag Actor Actor Partner Partner Partner Agg Actor
Sys-Pri Key MAC Sys-Pri Key Count MAC
--------------------------------------------------------------------------------
49 0 0x0419 00:00:00:00:00:00 0 0x0000 0 00:04:96:99:d2:54

Port list:

Member Port Rx Sel Mux Actor Partner
Port Priority State Logic State Flags Port
--------------------------------------------------------------------------------
49 0 Idle Unselected Detached -------- 0
50 0 Idle Unselected Detached -------- 0
51 0 Idle Unselected Detached -------- 0
52 0 Idle Unselected Detached -------- 0
================================================================================
Actor Flags: A-Activity, T-Timeout, G-Aggregation, S-Synchronization
C-Collecting, D-Distributing, F-Defaulted, E-Expired

Lag configuration on Brocade Switch :

lag New_Management dynamic id 110
ports ethernet 2/1/37 to 2/1/40
primary-port 2/1/37
lacp-timeout long
deploy

can anyone help me to configure this. Thanks in advance to read this post.

Re: How to configure uplink port in summit x460-48p

Ronald_Dvorak — Fri, 12 May 2023 18:38:38 GMT

Here a link to a knowledge base article...

https://extremeportal.force.com/ExtrArticleDetail?an=000082730

If that doesn't work, please post the EXOS config that you used for the LAG.

topic Re: How to configure uplink port in summit x460-48p in ExtremeSwitching (Other)

How to configure uplink port in summit x460-48p

Re: How to configure uplink port in summit x460-48p