Bootprelay/DHCP relay e2e

Alberto_Oter — Fri, 18 Aug 2023 21:27:10 GMT

Hi,

I have read lot of questions in Extreme forums about this, but they are focused just on the Client VLAN.

This is my topology:

10.97.12.180/32 - DHCP Server VLAN_33 <----> EXOS x670<----> Customer Network Cloud <----> PE Site Routers <----> <----> EXOS x470<----> VLAN_10 - DHCP Client - 10.241.84.64/28

Where on VLAN_10:
.65 Gateway
.66 to .68 DHCP pool.

From the DHCP Server Switch EXOS x670 Perspective, the config should be:

#enable bootprelay VLAN_33

From the DHCP Client Switch EXOS x470 Perspective, the config should be:

#configure Single_Server_OOB ipaddress 10.241.84.65/28 <-- Already done
#enable ipforwarding Single_Server_OOB <-- Already done
#configure bootprelay Single_Server_OOB add 10.97.12.180
#enable bootprelay Single_Server_OOB

This should be enough to make this scenario work?????

I forget to say that in the Customer Network Cloud there's a Firewall where the ports 67 & 68 are opened already, also the DHCP Server and the EXOS x470 are reachable by ping on its gateway (.65)

Appreciate the help.

topic Bootprelay/DHCP relay e2e in ExtremeSwitching (Other)

Bootprelay/DHCP relay e2e