https://community.extremenetworks.com/t5/extremeswitching-other/port-partitioning-2x50g-problem-on-7720-32c/m-p/118269#M4249 <P>Hi every one</P><P>&nbsp;</P><P>According to the documentation, the 7720 switch supports<SPAN>&nbsp;</SPAN><STRONG>port partitioning 2x50G</STRONG>. However, when I enter the configuration command, it displays the following message:</P><P>Port 1:1 does not support port partitioning mode 2x50G</P><P>Please guide me on whether this feature actually exists or not. If it does, how can I configure it?</P><P>Thank you.</P> Tue, 18 Mar 2025 02:52:44 GMT lucasfyn 2025-03-18T02:52:44Z https://community.extremenetworks.com/t5/extremeswitching-other/port-partitioning-2x50g-problem-on-7720-32c/m-p/118269#M4249 <P>Hi every one</P><P>&nbsp;</P><P>According to the documentation, the 7720 switch supports<SPAN>&nbsp;</SPAN><STRONG>port partitioning 2x50G</STRONG>. However, when I enter the configuration command, it displays the following message:</P><P>Port 1:1 does not support port partitioning mode 2x50G</P><P>Please guide me on whether this feature actually exists or not. If it does, how can I configure it?</P><P>Thank you.</P> Tue, 18 Mar 2025 02:52:44 GMT https://community.extremenetworks.com/t5/extremeswitching-other/port-partitioning-2x50g-problem-on-7720-32c/m-p/118269#M4249 lucasfyn 2025-03-18T02:52:44Z https://community.extremenetworks.com/t5/extremeswitching-other/port-partitioning-2x50g-problem-on-7720-32c/m-p/118280#M4250 <P>Could you link the document that states 2x50G is supported? I cannot seem to find that in the datasheet.<BR /><BR />I also noticed that there are no 2x50G Breakout cables supported on the 7720 on the optics website.<BR />It could be that this support is coming in a future release, but since there are no qualified cables, it may not be supported yet?<BR />optics.extremenetworks.com</P> Tue, 18 Mar 2025 13:52:54 GMT https://community.extremenetworks.com/t5/extremeswitching-other/port-partitioning-2x50g-problem-on-7720-32c/m-p/118280#M4250 Gabriel_G 2025-03-18T13:52:54Z