topic RE: Upgrading xos on stack with mismatched versions on the partition it will install too in ExtremeSwitching (Other)

Upgrading xos on stack with mismatched versions on the partition it will install too

DH1 — Wed, 11 Oct 2017 18:57:00 GMT

I will be upgrading the xos on a 5 node stack to 15.1.1.6 since I cannot find the download for 15.5.3.2-patch1-14. I was told that is the latest supported version but I cannot find the download on the site, probably because the switch is EOL.

The stack is currently running on the secondary partition. One node in the stack already has 15.1.1.6 installed on the primary partition while the others have 12.4.1.7. Will this cause any issues or will it just skip the install on that node?

Also, one node has a bootroom of 1.0.5.7 while the others have 1.0.5.5. Will this cause issues?

Thanks!

RE: Upgrading xos on stack with mismatched versions on the partition it will install too

davidj_cogliane — Wed, 11 Oct 2017 19:08:00 GMT

I believe "sync slot" is available in that code version. If the desired code is on the master you could push it from there to the other nodes.

Are you sure that code version will provide everything you need? Finding code has gotten a bit more difficult, but TAC is able to help and can even get you a download link if needed.

I don't see that code version either. It goes from 15.5.3.4 to 15.5.2.9, seems odd, TAC might be a good option.

RE: Upgrading xos on stack with mismatched versions on the partition it will install too

DH1 — Wed, 11 Oct 2017 20:09:00 GMT

Unfortunately the 15.1.1.6 code is on slot 3 which is not the master. I have this code running on a few other stacks and have had no issues with it so I thought it would be a good one to go too.

RE: Upgrading xos on stack with mismatched versions on the partition it will install too

Drew_C — Wed, 11 Oct 2017 20:09:00 GMT

Hi DH, what model are the switches you're upgrading?