S130 ARP issue

kouichi_ohtomo — Sat, 10 May 2014 11:43:00 GMT

I have question.

I want to know more information about the following items

1, What does the following mean?

2, Is it possible to change the value?

3, What change by changing the value?

**************************************

Current number of ARP retrans timers scheduled: 1

Current number of ARP stale timers scheduled: 0

Current number of ARP reachable timers scheduled: 134

***************************************

Because, I think problem is related to the ARP.

Problem occurs in the routing environment of S130 monitoring that stack of A2/A4.

However, I can not reproduce the problem.

The difference is only that it is a S150 and S130.

And I found the following differences.

Therefore, I want to know the contents in detail.

***********************************************************************
Slot Model Serial # Versions
------ ---------------- -------------------- -------------------------
1 SSA-T4068-0252 11525586636E Hw: 3
Bp: 01.01.00
Fw: 07.71.02.0005
2 SSA-T4068-0252 11525582636E Hw: 3
Bp: 01.01.00
Fw: 07.71.02.0005
debug(dbg)()->
CnetToPhysDb:
Current number of ARP retrans timers scheduled: 1 <-
Current number of ARP stale timers scheduled: 0
Current number of ARP reachable timers scheduled: 134 <-
debug(dbg)()->
CnetToPhysDb:
Current number of ARP retrans timers scheduled: 0
Current number of ARP stale timers scheduled: 0
Current number of ARP reachable timers scheduled: 0
******************************************************************************
Slot Model Serial # Versions
------ ---------------- -------------------- -------------------------
1 SSA-T1068-0652 12370383596G Hw: 3
Bp: 01.01.00
Fw: 07.71.02.0005
2 SSA-T1068-0652 12370384596G Hw: 3
Bp: 01.01.00
Fw: 07.71.02.0005
debug(dbg)()->
CnetToPhysDb:
Current number of ARP retrans timers scheduled: 0
Current number of ARP stale timers scheduled: 0
Current number of ARP reachable timers scheduled: 0

debug(dbg)()->
CnetToPhysDb:
Current number of ARP retrans timers scheduled: 2 <-
Current number of ARP stale timers scheduled: 0
Current number of ARP reachable timers scheduled: 4 <-
****************************************************************************

Regards,

// Kouichi

RE: S130 ARP issue

Brian_Townsend — Tue, 13 May 2014 19:04:00 GMT

Kouichi,

Good day, we hope you are well.

The output that you are requesting details on, is for engineering purposes only. A user should not retrieve or manipulate these commands without the direct assistance from GTAC.

If you would like further assistance, please contact the GTAC directly and we would be more than happy to assist you.

Thank you and take care,

Brian

topic RE: S130 ARP issue in ExtremeSwitching (Other)

S130 ARP issue

RE: S130 ARP issue