topic failed k-10 blade in ExtremeSwitching (Other)

failed k-10 blade

Ako_Singletary — Mon, 04 May 2015 21:11:00 GMT

I have a K-12 switch and one of the blades stopped working. So I replaced the blade and the status light did not come on, and none of the ports on that blade work. What could be the problem?

RE: failed k-10 blade

Doug — Tue, 05 May 2015 06:14:00 GMT

Hello, Is the K series showing messages in the logging buffer for this slot?

RE: failed k-10 blade

Doug — Sat, 09 May 2015 03:40:00 GMT

Ako,

Just following up. Are you still having issues with the K?

RE: failed k-10 blade

Ako_Singletary — Tue, 12 May 2015 00:05:00 GMT

Nope, it seemed to have cleared-out working as it should now. Thanks!

RE: failed k-10 blade

Doug — Tue, 12 May 2015 00:58:00 GMT

Good news, keep us posted if things change. Typically that logging buffer is a great place to go on the K to see why the slot is failing. You can paste the error message into our GTAC Knowledge Site. If we know about the error, it should give you recommendations on next steps.