https://community.extremenetworks.com/t5/extremeswitching-other/2015-11-09-new-gtac-knowledge-articles-november-1-november-7/m-p/9567#M595 Here are the new articles that were published last week <BR /> (November 01 - November 07 2015) in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, November 01, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IDM-local-account-with-kerberos-packets" target="_blank" rel="nofollow noreferrer noopener">IDM enabled port without logging in to the PC accounts the port as authenticated and assign a Kerberos authenticated flag</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-blade-shipped-with-code-7-99-12-0002" target="_blank" rel="nofollow noreferrer noopener">S-Series blade shipped with code 7.99.12.0002</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Virtual-NetSight-NAC-appliances-crashing-after-upgrade-to-6-3" target="_blank" rel="nofollow noreferrer noopener">Virtual NetSight/NAC appliances crashing after upgrade to 6.3</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-upgrade-bin-files-keep-reporting-incorrect-MD5-sum-after-multiple-downloads" target="_blank" rel="nofollow noreferrer noopener">NAC upgrade .bin files keep reporting incorrect MD5 sum after multiple downloads</A><BR /> <BR /> Monday, November 02, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IdentiFi-controller-will-not-reboot-after-a-firmware-update-when-using-Hyper-V" target="_blank" rel="nofollow noreferrer noopener">IdentiFi controller will not reboot after a firmware update when using Hyper-V</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/3610-and-3620-reset-while-running-9-15-08-and-9-15-09" target="_blank" rel="nofollow noreferrer noopener">3610 and 3620 reset while running 9.15.08 and 9.15.09</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-remove-a-node-from-a-stack" target="_blank" rel="nofollow noreferrer noopener">How to remove a node from a stack</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-module-not-joining-chassis-with-error-The-legacy-module-in-slot-X-cannot-run-in-V2-compatibility-mode" target="_blank" rel="nofollow noreferrer noopener">S-Series module not joining chassis with error: The legacy module in slot X cannot run in V2 compatibility mode.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-change-the-master-capability-for-a-slot-in-a-stack" target="_blank" rel="nofollow noreferrer noopener">How to change the master-capability for a slot in a stack.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-Manager-showing-Identifi-Controller-as-not-synchronized" target="_blank" rel="nofollow noreferrer noopener">Wireless Manager showing Identifi Controller as "not synchronized"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-Appliance-GUI-reports-WDS-Key-too-short-even-when-it-s-larger-than16-characters-long" target="_blank" rel="nofollow noreferrer noopener">Wireless Appliance GUI reports WDS Key too short even when it's larger than16 characters long</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-appliance-resetting-due-to-MU-Session-Manager-not-responding" target="_blank" rel="nofollow noreferrer noopener">Wireless appliance resetting due to MU Session Manager not responding.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-synchronize-switch-with-Ridgeline-after-upgrading-to-SP2" target="_blank" rel="nofollow noreferrer noopener">Unable to synchronize switch with Ridgeline after upgrading to SP2</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-is-the-Wireless-WAS-server-upgrade-process" target="_blank" rel="nofollow noreferrer noopener">Where is the Wireless WAS server upgrade process?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-is-the-Extreme-Networks-Whitepapers-hyperlink" target="_blank" rel="nofollow noreferrer noopener">Where is the Extreme Networks Whitepapers hyperlink?</A><BR /> <BR /> Tuesday, November 03, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Oneview-script-reports-Missing-parameter-for-task-CLI-LOGIN-PROMPT" target="_blank" rel="nofollow noreferrer noopener">Oneview script reports Missing parameter for task: CLI_LOGIN_PROMPT</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-measure-the-total-volume-of-routed-traffic-on-an-EXOS-device" target="_blank" rel="nofollow noreferrer noopener">How to measure the total volume of routed traffic on an EXOS device</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/ACL-redirect-port-not-overriding-L2-echo-kill" target="_blank" rel="nofollow noreferrer noopener">ACL redirect-port not overriding L2 echo kill</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-the-ST1206-0848-F6-Support-PoE" target="_blank" rel="nofollow noreferrer noopener">Does the ST1206-0848-F6 Support PoE?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Change-the-Pre-shared-Key-in-a-WDS-WLAN-Service" target="_blank" rel="nofollow noreferrer noopener">How ?To Change the Pre-shared Key in a WDS WLAN Service</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/K10-fabric-module-crashed" target="_blank" rel="nofollow noreferrer noopener">K-Series Fabric Module in boot loop with message: Error! System Image Checksums do not match!</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-enforce-more-than-43-rules-via-Policy-Manager" target="_blank" rel="nofollow noreferrer noopener">Unable to enforce more than 43 rules via Policy Manager</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Nintendo-3dx-will-not-attach-to-the-AP3825" target="_blank" rel="nofollow noreferrer noopener">Nintendo 3dx will not attach to the AP3825</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/7100G-Series-error-when-setting-port-duplex-to-half-Duplex-half-not-supported-on-port" target="_blank" rel="nofollow noreferrer noopener">7100G-Series error when setting port duplex to half: Duplex half not supported on port</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-Fails-to-Boot-With-Error-Message-Could-not-read-Part-Number-from-Chassis-EEPROM-CRC-mismatch" target="_blank" rel="nofollow noreferrer noopener">S-Series Fails to Boot With Error Message: Could not read Part Number from Chassis EEPROM - CRC mismatch</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Importing-B-AC-topology-from-the-controller-causes-the-l3-presence-to-be-enabled-in-NetSight-Wireless-Manager" target="_blank" rel="nofollow noreferrer noopener">Importing B@AC topology from the controller causes the l3 presence to be enabled in NetSight Wireless Manager</A><BR /> <BR /> Wednesday, November 04, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Deploying-template-to-wireless-controller-fails-when-there-is-no-topology-group-present-on-the-controller" target="_blank" rel="nofollow noreferrer noopener">Deploying template to wireless controller fails when there is no topology group present on the controller</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Radius-configuration-with-shared-secret-of-32-character-are-lost-after-reboot" target="_blank" rel="nofollow noreferrer noopener">Radius configuration with shared-secret of 32 character are lost after reboot</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/ID-LED-on-the-front-of-the-5210-Wireless-Appliance-is-Blue-what-does-that-mean" target="_blank" rel="nofollow noreferrer noopener">ID LED on the front of the 5210 Wireless Appliance is Blue, what does that mean?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/High-CPU-on-K-Series-Top-Task-SNMP" target="_blank" rel="nofollow noreferrer noopener">High CPU on K-Series - Top Task SNMP</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-blade-reset-Fuji-LU-RAM" target="_blank" rel="nofollow noreferrer noopener">S-Series blade reset - Fuji LU RAM</A><BR /> <BR /> Thursday, November 05, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Random-Windows-7-Clients-Not-Connecting-to-802-1x-VNS" target="_blank" rel="nofollow noreferrer noopener">Random Windows 7 Clients Not Connecting to 802.1x VNS</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-disable-LED-on-the-Access-Points" target="_blank" rel="nofollow noreferrer noopener">How to disable LED on the Access Points</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-verify-that-your-VRRP-configuration-is-up-and-running-properly" target="_blank" rel="nofollow noreferrer noopener">How to verify that your VRRP configuration is up and running properly</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-generate-backdoor-password-for-ELS-100" target="_blank" rel="nofollow noreferrer noopener">How to generate backdoor password for ELS-100</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Serial-numbers-are-truncated-in-OneView-DeviceView" target="_blank" rel="nofollow noreferrer noopener">Serial numbers are truncated in OneView DeviceView</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/After-upgrade-to-9-21-04-AP-crashes-when-retrieving-log-traces" target="_blank" rel="nofollow noreferrer noopener">After upgrade to 9.21.04 AP crashes when retrieving log traces</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NetSight-Policy-Manager-SNMP-issues-changing-default-role-on-ports" target="_blank" rel="nofollow noreferrer noopener">NetSight Policy Manager - SNMP issues changing default role on ports and policy enforce and verify fails</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Invalid-stats-on-AP-Performance-by-Radio-GUI-report" target="_blank" rel="nofollow noreferrer noopener">Invalid stats on AP Performance by Radio GUI report.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/OneView-Wireless-information-no-showing-up-on-OneView-s-heat-maps" target="_blank" rel="nofollow noreferrer noopener">OneView: Wireless information no showing up on OneView's heat maps</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Possible-Stacking-Issues" target="_blank" rel="nofollow noreferrer noopener">Why does "show switch" display No Backup when executing that command from the Master from Summit stack?</A><BR /> <BR /> Friday, November 06, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Block-PVST-on-a-port-using-Policy" target="_blank" rel="nofollow noreferrer noopener">How to Block PVST on a port using Policy</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/NAC-Troubleshooting-Tips-Debug-Incorrect-or-Missing-Hostname-Information" target="_blank" rel="nofollow noreferrer noopener">NAC Troubleshooting Tips - Debug Incorrect or Missing Hostname Information</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Upgrading-A-NAC-appliance-To-6-2" target="_blank" rel="nofollow noreferrer noopener">Upgrading A NAC appliance To 6.2</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-use-a-script-to-configure-an-EXOS-switch-login-banner-using-Ridgeline-or-NetSight" target="_blank" rel="nofollow noreferrer noopener">How to use a script to configure an EXOS switch login banner using Ridgeline or NetSight</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-can-t-I-turn-on-auto-negotiation-on-some-ports-of-my-X650" target="_blank" rel="nofollow noreferrer noopener">Why can't I turn on auto-negotiation on some ports of my X650?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Access-Points-are-connected-but-not-operational" target="_blank" rel="nofollow noreferrer noopener">Access Points are connected, but not operational</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-I-use-an-existing-VRRP-VRID-to-create-another-VRRP-instance" target="_blank" rel="nofollow noreferrer noopener">Can I use an existing VRRP VRID to create another VRRP instance</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-Performance-Problems-Errors-on-VSB-ports" target="_blank" rel="nofollow noreferrer noopener">S Series Performance Problems Errors on VSB ports</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/RFC-3576-Errors-reported-in-NAC-appliance-events-after-firmware-upgrade-of-device" target="_blank" rel="nofollow noreferrer noopener">RFC 3576 Errors reported in NAC appliance events after firmware upgrade of device</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Ascom-i75-Handsets-are-experiencing-connection-issues" target="_blank" rel="nofollow noreferrer noopener">Ascom i75 Handsets are experiencing connection issues</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-maximum-number-of-IPv4-Multicast-groups-supported-on-Extreme-devices" target="_blank" rel="nofollow noreferrer noopener">What is the maximum number of IPv4 Multicast groups supported on Extreme devices?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/MIBs-for-N-S-Series-Power-Supply-and-Fan-Tray-Status" target="_blank" rel="nofollow noreferrer noopener">MIBs for N/S-Series Power Supply and Fan Tray Status</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-is-one-power-supply-outputs-different-from-the-rest" target="_blank" rel="nofollow noreferrer noopener">Why is one power supply outputs different from the rest in the Black Diamond Chassis</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NetSight-Compass-not-showing-ip-addresses-for-all-ports" target="_blank" rel="nofollow noreferrer noopener">NetSight Compass not showing ip-addresses for all ports</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-running-08-32-02-0009-Inter-area-filtering-on-OSPF-ABR-does-not-work-as-expected" target="_blank" rel="nofollow noreferrer noopener">S-Series running 08.32.02.0009. Inter-area filtering on OSPF ABR does not work as expected</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/vlan-communication-lost-in-EAPS-environment-when-CDP-packet-received-over-backup-EAPS-link" target="_blank" rel="nofollow noreferrer noopener">vlan communication lost in EAPS environment, when CDP packet received over backup EAPS link</A><BR /> <BR /> Saturday, November 07, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-function-of-the-process-NIM-t-Task" target="_blank" rel="nofollow noreferrer noopener">What is the function of the process NIM-t Task</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Configuring-ACL-setup-for-user-ports-not-connecting-to-internet" target="_blank" rel="nofollow noreferrer noopener">Configuring ACL setup for user ports not connecting to internet</A> Tue, 10 Nov 2015 05:25:00 GMT Ken_Thomas 2015-11-10T05:25:00Z https://community.extremenetworks.com/t5/extremeswitching-other/2015-11-09-new-gtac-knowledge-articles-november-1-november-7/m-p/9567#M595 Here are the new articles that were published last week <BR /> (November 01 - November 07 2015) in <A href="https://gtacknowledge.extremenetworks.com/" target="_blank" rel="nofollow noreferrer noopener">GTAC Knowledge</A>:<BR /> <BR /> Sunday, November 01, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IDM-local-account-with-kerberos-packets" target="_blank" rel="nofollow noreferrer noopener">IDM enabled port without logging in to the PC accounts the port as authenticated and assign a Kerberos authenticated flag</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-blade-shipped-with-code-7-99-12-0002" target="_blank" rel="nofollow noreferrer noopener">S-Series blade shipped with code 7.99.12.0002</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Virtual-NetSight-NAC-appliances-crashing-after-upgrade-to-6-3" target="_blank" rel="nofollow noreferrer noopener">Virtual NetSight/NAC appliances crashing after upgrade to 6.3</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NAC-upgrade-bin-files-keep-reporting-incorrect-MD5-sum-after-multiple-downloads" target="_blank" rel="nofollow noreferrer noopener">NAC upgrade .bin files keep reporting incorrect MD5 sum after multiple downloads</A><BR /> <BR /> Monday, November 02, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/IdentiFi-controller-will-not-reboot-after-a-firmware-update-when-using-Hyper-V" target="_blank" rel="nofollow noreferrer noopener">IdentiFi controller will not reboot after a firmware update when using Hyper-V</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/3610-and-3620-reset-while-running-9-15-08-and-9-15-09" target="_blank" rel="nofollow noreferrer noopener">3610 and 3620 reset while running 9.15.08 and 9.15.09</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-remove-a-node-from-a-stack" target="_blank" rel="nofollow noreferrer noopener">How to remove a node from a stack</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-module-not-joining-chassis-with-error-The-legacy-module-in-slot-X-cannot-run-in-V2-compatibility-mode" target="_blank" rel="nofollow noreferrer noopener">S-Series module not joining chassis with error: The legacy module in slot X cannot run in V2 compatibility mode.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-change-the-master-capability-for-a-slot-in-a-stack" target="_blank" rel="nofollow noreferrer noopener">How to change the master-capability for a slot in a stack.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-Manager-showing-Identifi-Controller-as-not-synchronized" target="_blank" rel="nofollow noreferrer noopener">Wireless Manager showing Identifi Controller as "not synchronized"</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-Appliance-GUI-reports-WDS-Key-too-short-even-when-it-s-larger-than16-characters-long" target="_blank" rel="nofollow noreferrer noopener">Wireless Appliance GUI reports WDS Key too short even when it's larger than16 characters long</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-appliance-resetting-due-to-MU-Session-Manager-not-responding" target="_blank" rel="nofollow noreferrer noopener">Wireless appliance resetting due to MU Session Manager not responding.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-synchronize-switch-with-Ridgeline-after-upgrading-to-SP2" target="_blank" rel="nofollow noreferrer noopener">Unable to synchronize switch with Ridgeline after upgrading to SP2</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-is-the-Wireless-WAS-server-upgrade-process" target="_blank" rel="nofollow noreferrer noopener">Where is the Wireless WAS server upgrade process?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-is-the-Extreme-Networks-Whitepapers-hyperlink" target="_blank" rel="nofollow noreferrer noopener">Where is the Extreme Networks Whitepapers hyperlink?</A><BR /> <BR /> Tuesday, November 03, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Oneview-script-reports-Missing-parameter-for-task-CLI-LOGIN-PROMPT" target="_blank" rel="nofollow noreferrer noopener">Oneview script reports Missing parameter for task: CLI_LOGIN_PROMPT</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-measure-the-total-volume-of-routed-traffic-on-an-EXOS-device" target="_blank" rel="nofollow noreferrer noopener">How to measure the total volume of routed traffic on an EXOS device</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/ACL-redirect-port-not-overriding-L2-echo-kill" target="_blank" rel="nofollow noreferrer noopener">ACL redirect-port not overriding L2 echo kill</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-the-ST1206-0848-F6-Support-PoE" target="_blank" rel="nofollow noreferrer noopener">Does the ST1206-0848-F6 Support PoE?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Change-the-Pre-shared-Key-in-a-WDS-WLAN-Service" target="_blank" rel="nofollow noreferrer noopener">How ?To Change the Pre-shared Key in a WDS WLAN Service</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/K10-fabric-module-crashed" target="_blank" rel="nofollow noreferrer noopener">K-Series Fabric Module in boot loop with message: Error! System Image Checksums do not match!</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-enforce-more-than-43-rules-via-Policy-Manager" target="_blank" rel="nofollow noreferrer noopener">Unable to enforce more than 43 rules via Policy Manager</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Nintendo-3dx-will-not-attach-to-the-AP3825" target="_blank" rel="nofollow noreferrer noopener">Nintendo 3dx will not attach to the AP3825</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/7100G-Series-error-when-setting-port-duplex-to-half-Duplex-half-not-supported-on-port" target="_blank" rel="nofollow noreferrer noopener">7100G-Series error when setting port duplex to half: Duplex half not supported on port</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-Fails-to-Boot-With-Error-Message-Could-not-read-Part-Number-from-Chassis-EEPROM-CRC-mismatch" target="_blank" rel="nofollow noreferrer noopener">S-Series Fails to Boot With Error Message: Could not read Part Number from Chassis EEPROM - CRC mismatch</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Importing-B-AC-topology-from-the-controller-causes-the-l3-presence-to-be-enabled-in-NetSight-Wireless-Manager" target="_blank" rel="nofollow noreferrer noopener">Importing B@AC topology from the controller causes the l3 presence to be enabled in NetSight Wireless Manager</A><BR /> <BR /> Wednesday, November 04, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Deploying-template-to-wireless-controller-fails-when-there-is-no-topology-group-present-on-the-controller" target="_blank" rel="nofollow noreferrer noopener">Deploying template to wireless controller fails when there is no topology group present on the controller</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Radius-configuration-with-shared-secret-of-32-character-are-lost-after-reboot" target="_blank" rel="nofollow noreferrer noopener">Radius configuration with shared-secret of 32 character are lost after reboot</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/ID-LED-on-the-front-of-the-5210-Wireless-Appliance-is-Blue-what-does-that-mean" target="_blank" rel="nofollow noreferrer noopener">ID LED on the front of the 5210 Wireless Appliance is Blue, what does that mean?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/High-CPU-on-K-Series-Top-Task-SNMP" target="_blank" rel="nofollow noreferrer noopener">High CPU on K-Series - Top Task SNMP</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-blade-reset-Fuji-LU-RAM" target="_blank" rel="nofollow noreferrer noopener">S-Series blade reset - Fuji LU RAM</A><BR /> <BR /> Thursday, November 05, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Random-Windows-7-Clients-Not-Connecting-to-802-1x-VNS" target="_blank" rel="nofollow noreferrer noopener">Random Windows 7 Clients Not Connecting to 802.1x VNS</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-disable-LED-on-the-Access-Points" target="_blank" rel="nofollow noreferrer noopener">How to disable LED on the Access Points</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-verify-that-your-VRRP-configuration-is-up-and-running-properly" target="_blank" rel="nofollow noreferrer noopener">How to verify that your VRRP configuration is up and running properly</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-generate-backdoor-password-for-ELS-100" target="_blank" rel="nofollow noreferrer noopener">How to generate backdoor password for ELS-100</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Serial-numbers-are-truncated-in-OneView-DeviceView" target="_blank" rel="nofollow noreferrer noopener">Serial numbers are truncated in OneView DeviceView</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/After-upgrade-to-9-21-04-AP-crashes-when-retrieving-log-traces" target="_blank" rel="nofollow noreferrer noopener">After upgrade to 9.21.04 AP crashes when retrieving log traces</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NetSight-Policy-Manager-SNMP-issues-changing-default-role-on-ports" target="_blank" rel="nofollow noreferrer noopener">NetSight Policy Manager - SNMP issues changing default role on ports and policy enforce and verify fails</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Invalid-stats-on-AP-Performance-by-Radio-GUI-report" target="_blank" rel="nofollow noreferrer noopener">Invalid stats on AP Performance by Radio GUI report.</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/OneView-Wireless-information-no-showing-up-on-OneView-s-heat-maps" target="_blank" rel="nofollow noreferrer noopener">OneView: Wireless information no showing up on OneView's heat maps</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Possible-Stacking-Issues" target="_blank" rel="nofollow noreferrer noopener">Why does "show switch" display No Backup when executing that command from the Master from Summit stack?</A><BR /> <BR /> Friday, November 06, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Block-PVST-on-a-port-using-Policy" target="_blank" rel="nofollow noreferrer noopener">How to Block PVST on a port using Policy</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/NAC-Troubleshooting-Tips-Debug-Incorrect-or-Missing-Hostname-Information" target="_blank" rel="nofollow noreferrer noopener">NAC Troubleshooting Tips - Debug Incorrect or Missing Hostname Information</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/Upgrading-A-NAC-appliance-To-6-2" target="_blank" rel="nofollow noreferrer noopener">Upgrading A NAC appliance To 6.2</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-use-a-script-to-configure-an-EXOS-switch-login-banner-using-Ridgeline-or-NetSight" target="_blank" rel="nofollow noreferrer noopener">How to use a script to configure an EXOS switch login banner using Ridgeline or NetSight</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-can-t-I-turn-on-auto-negotiation-on-some-ports-of-my-X650" target="_blank" rel="nofollow noreferrer noopener">Why can't I turn on auto-negotiation on some ports of my X650?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Access-Points-are-connected-but-not-operational" target="_blank" rel="nofollow noreferrer noopener">Access Points are connected, but not operational</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-I-use-an-existing-VRRP-VRID-to-create-another-VRRP-instance" target="_blank" rel="nofollow noreferrer noopener">Can I use an existing VRRP VRID to create another VRRP instance</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-Performance-Problems-Errors-on-VSB-ports" target="_blank" rel="nofollow noreferrer noopener">S Series Performance Problems Errors on VSB ports</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/RFC-3576-Errors-reported-in-NAC-appliance-events-after-firmware-upgrade-of-device" target="_blank" rel="nofollow noreferrer noopener">RFC 3576 Errors reported in NAC appliance events after firmware upgrade of device</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Ascom-i75-Handsets-are-experiencing-connection-issues" target="_blank" rel="nofollow noreferrer noopener">Ascom i75 Handsets are experiencing connection issues</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-maximum-number-of-IPv4-Multicast-groups-supported-on-Extreme-devices" target="_blank" rel="nofollow noreferrer noopener">What is the maximum number of IPv4 Multicast groups supported on Extreme devices?</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/MIBs-for-N-S-Series-Power-Supply-and-Fan-Tray-Status" target="_blank" rel="nofollow noreferrer noopener">MIBs for N/S-Series Power Supply and Fan Tray Status</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-is-one-power-supply-outputs-different-from-the-rest" target="_blank" rel="nofollow noreferrer noopener">Why is one power supply outputs different from the rest in the Black Diamond Chassis</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/NetSight-Compass-not-showing-ip-addresses-for-all-ports" target="_blank" rel="nofollow noreferrer noopener">NetSight Compass not showing ip-addresses for all ports</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/S-Series-running-08-32-02-0009-Inter-area-filtering-on-OSPF-ABR-does-not-work-as-expected" target="_blank" rel="nofollow noreferrer noopener">S-Series running 08.32.02.0009. Inter-area filtering on OSPF ABR does not work as expected</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/vlan-communication-lost-in-EAPS-environment-when-CDP-packet-received-over-backup-EAPS-link" target="_blank" rel="nofollow noreferrer noopener">vlan communication lost in EAPS environment, when CDP packet received over backup EAPS link</A><BR /> <BR /> Saturday, November 07, 2015:<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-function-of-the-process-NIM-t-Task" target="_blank" rel="nofollow noreferrer noopener">What is the function of the process NIM-t Task</A><BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Configuring-ACL-setup-for-user-ports-not-connecting-to-internet" target="_blank" rel="nofollow noreferrer noopener">Configuring ACL setup for user ports not connecting to internet</A> Tue, 10 Nov 2015 05:25:00 GMT https://community.extremenetworks.com/t5/extremeswitching-other/2015-11-09-new-gtac-knowledge-articles-november-1-november-7/m-p/9567#M595 Ken_Thomas 2015-11-10T05:25:00Z