topic Re: Require Command output in ExtremeSwitching (VSP/Fabric Engine)

Require Command output

jhunjhun — Fri, 17 Apr 2020 12:30:54 GMT

Can some one share the sample command output of

show running-config verbose

for Avaya ERS and Avaya VSP switches.

I am a freelancer researcher so would like to know more about the device configuration

Re: Require Command output

Dilraj_Singh_Kh — Fri, 17 Apr 2020 13:00:27 GMT

Here I am attaching it for a VSP. I don’t have any handy for ERS. Will upload once available!

DILRAJ

Re: Require Command output

jhunjhun — Fri, 17 Apr 2020 13:06:23 GMT

Dhiraj, Thanks for providing the configuration files

This will surely help me in my research.

Do we have some kind of vendor specif hardening guidelines too ? pr security configurations ?

Re: Require Command output

Dilraj_Singh_Kh — Fri, 17 Apr 2020 13:11:07 GMT

If you mean “Hardware guides”, then below is the link:

https://www.extremenetworks.com/support/documentation/product-type/hardware/

DILRAJ

Re: Require Command output

jhunjhun — Tue, 21 Apr 2020 12:13:05 GMT

Dhiraj do we have any updates on the ERS appliance configurations.

Also how can i view all the users configured on the device

Re: Require Command output

Dilraj_Singh_Kh — Tue, 21 Apr 2020 13:17:09 GMT

Attached.

You can do “show username” to see the users configured.

DILRAJ

Re: Require Command output

jhunjhun — Tue, 21 Apr 2020 13:30:15 GMT

I am getting the blow error for

VSP-8284XSQ:1(config)#show username
^
% Invalid input detected at '^' marker.

Re: Require Command output

Dilraj_Singh_Kh — Tue, 21 Apr 2020 13:33:11 GMT

For VOSS, it’s “show users”

Re: Require Command output

jhunjhun — Tue, 21 Apr 2020 13:34:21 GMT

show users

VSP-8284XSQ:1(config)#show users
************************************************************************************
Command Execution Time: Tue Apr 21 06:27:28 2020 UTC
************************************************************************************
SESSION USER ACCESS IP ADDRESS
Console rwa rwa ---------- (current)

whereas i need the list of all the users configured

Re: Require Command output

Dilraj_Singh_Kh — Tue, 21 Apr 2020 13:36:47 GMT

By default, this is the only user configured.

Re: Require Command output

jhunjhun — Tue, 21 Apr 2020 13:39:10 GMT

Even after adding a new user i am not able to list it

VSP-8284XSQ:1(config)#username add yash level rwa enable
Enter password : ******
Re-enter password : ******
VSP-8284XSQ:1(config)#show users
************************************************************************************
Command Execution Time: Tue Apr 21 06:32:17 2020 UTC
************************************************************************************
SESSION USER ACCESS IP ADDRESS
Console rwa rwa ---------- (current)

I need the list of all the local users configured

Re: Require Command output

Dilraj_Singh_Kh — Tue, 21 Apr 2020 13:49:52 GMT

For that do “show cli username”