topic Re: Error: SMLT VLAN must have i-sid association. in ExtremeSwitching (VSP/Fabric Engine)

Error: SMLT VLAN must have i-sid association.

Anonymous — Wed, 07 Apr 2021 15:49:08 GMT

Hi,

Getting the error below but can’t understand what it is requiring me to do:

Error: SMLT VLAN must have i-sid association.

The VIST is up an running:


************************************************************************************
                Command Execution Time: Wed Apr 07 07:43:06 2021 GMT
************************************************************************************
====================================================================================================
                                    IST Info
====================================================================================================
PEER-IP              VLAN     ENABLE   IST
ADDRESS              ID       IST      STATUS
----------------------------------------------------------------------------------------------------
172.20.250.246       4053     true     up


NEGOTIATED                                    MASTER/
DIALECT      IST STATE                        SLAVE
----------------------------------------------------------------------------------------------------
v6.0         Up                               Slave

Equally the VIST VLAN 4053 has a valid I-SID:

************************************************************************************
                Command Execution Time: Wed Apr 07 08:33:28 2021 GMT
************************************************************************************
====================================================================================================
                                   Vlan I-SID
====================================================================================================
VLAN_ID    I-SID                I-SID NAME

4053       10124053             ISID-10124053

This is the configuration I am adding, and where the error displays:

Core2:1(config)#% interface GigabitEthernet 3/1
Core2:1(config-if)#% encap dot1
Core2:1(config-if)#% name "BSD-SK1"
Core2:1(config-if)#% untagged-frames-discard
Core2:1(config-if)#% default-vlan-id 0
Core2:1(config-if)#% slpp packet-rx
Core2:1(config-if)#% slpp packet-rx-threshold 50
Core2:1(config-if)#% lacp key 301
Core2:1(config-if)#% lacp aggregation enable
Core2:1(config-if)#% lacp mode active
Core2:1(config-if)#% lacp enable
Core2:1(config-if)#% exit
Core2:1(config)#%
Core2:1(config)#% mlt 301
Core2:1(config)#% mlt 301 name "BSD-SK1"
Core2:1(config)#% mlt 301 encapsulation dot1q
Core2:1(config)#% interface mlt 301
Core2:1(config-mlt)#% lacp key 301
Core2:1(config-mlt)#% lacp enable
Core2:1(config-mlt)#% smlt

Error: SMLT VLAN must have i-sid association.

Many thanks in advance

Re: Error: SMLT VLAN must have i-sid association.

Miguel-Angel_RO — Wed, 07 Apr 2021 15:53:19 GMT

Hi Martin,

It seems that some VLANs configured on the port 3/1 or MLT 301 has no i-sid.

check it with :

show vlan member

show vlan i-sid

Mig

Re: Error: SMLT VLAN must have i-sid association.

Anonymous — Wed, 07 Apr 2021 16:40:56 GMT

Hi Mig,

Thanks for posting a reply.

Provided a small portion of the output below you requested, it covers interface 3/1 in the example above showing VLANs associated to the port and I-SID’s associated to the VLANs.

The MLT is using LACP, so no ports are directly associated to it yet (other then the LACP Key) being dynamic, hence no I-SID is currently directly tied to the MLT at this time - if I’ve understood that correctly.

When the interfaces come up and the MLT is dynamically formed then underlying port / VLAN assignment is then associated to the MLT I believe.

I’m obviously missing a step, but can’t put my finger on it as it all seems in place?

************************************************************************************
                Command Execution Time: Wed Apr 07 09:29:02 2021 GMT
************************************************************************************
====================================================================================================
                                   Vlan Port
====================================================================================================
VLAN PORT               ACTIVE             STATIC             NOT_ALLOW
ID   MEMBER             MEMBER             MEMBER             MEMBER
----------------------------------------------------------------------------------------------------
1    1/1-1/16,3/1-3/22, 1/1-1/16,3/1-3/22,
     4/1-4/22           4/1-4/22

100  3/1                3/1

102  4/2                4/2

104  3/3                3/3

106  4/4                4/4

108  3/5                3/5

110  4/6                4/6

112  3/7                3/7

114  4/8                4/8

116  3/9                3/9

118  4/10               4/10

120  3/11               3/11

122  4/12               4/12

124  3/13               3/13

126  4/14               4/14

128  3/15               3/15

130  4/16               4/16

132  3/17               3/17

134  4/18               4/18

136  3/19               3/19

138  4/20               4/20

200  3/1                3/1

************************************************************************************
                Command Execution Time: Wed Apr 07 09:30:13 2021 GMT
************************************************************************************
====================================================================================================
                                   Vlan I-SID
====================================================================================================
VLAN_ID    I-SID                I-SID NAME
----------------------------------------------------------------------------------------------------
1
100        12120100             ISID-12120100
102        12120102             ISID-12120102
104        12120104             ISID-12120104
106        12120106             ISID-12120106
108        12120108             ISID-12120108
110        12120110             ISID-12120110
112        12120112             ISID-12120112
114        12120114             ISID-12120114
116        12120116             ISID-12120116
118        12120118             ISID-12120118
120        12120120             ISID-12120120
122        12120122             ISID-12120122
124        12120124             ISID-12120124
126        12120126             ISID-12120126
128        12120128             ISID-12120128
130        12120130             ISID-12120130
132        12120132             ISID-12120132
134        12120134             ISID-12120134
136        12120136             ISID-12120136
138        12120138             ISID-12120138
200        12120200             ISID-12120200

Thanks.

Re: Error: SMLT VLAN must have i-sid association.

Miguel-Angel_RO — Wed, 07 Apr 2021 17:59:24 GMT

Martin,

I see the VLAN 1 provisioned to the port 3/1.

Mig

Re: Error: SMLT VLAN must have i-sid association.

Anonymous — Wed, 07 Apr 2021 22:04:21 GMT

Ah, well spotted!

That’s caught me out before, those ports should have already been removed from VLAN 1

Removed VLAN 1 from those ports and all now sorted.

Thanks for the insight.

Cheers,

Martin