topic Re: SNMPv3 - VOSS - Solarwinds in ExtremeSwitching (VSP/Fabric Engine)

SNMPv3 - VOSS - Solarwinds

bfaltys — Wed, 15 Sep 2021 22:36:43 GMT

Has anyone gotten this to work? I’ve been trying different combinations of MD5/SHA1 for auth and DES/AES128/AES192/AES256 for priv, as well as only doing auth with no priv, and can’t seem to get it to work. My most recent config...

VSP5520-TEST:1(config)#sh run | inc snmp
************************************************************************************
Command Execution Time: Wed Sep 15 10:30:24 2021 CDT
************************************************************************************
snmp-server contact "NETWORK SERVICES"
snmp-server location "TEST LAB"
snmp-server user NET-USER group "NET-GROUP"
snmp-server view "NET-VIEW" 1
snmp-server group "NET-GROUP" "" auth-no-priv read-view NET-VIEW notify-view NET-VIEW
snmp-server host 192.168.1.67 v3 authNoPriv NET-USER

Re: SNMPv3 - VOSS - Solarwinds

Todd_Hancock — Wed, 15 Sep 2021 23:44:10 GMT

Hi,
I assume you are setting the keys when you create the User and it just doesn’t show in the output-
snmp-server user <Username1> group <GroupName> sha <Authentication Key> aes <Privacy Key>
If you are on VOSS 8.2 or higher the syntax changes a bit to allow password confirmation.
If you are using an access-list you will need to add the Group to the allow policy.
access-policy # snmp-group <GroupName> usm
Also don't forget to remove the default "initial" group as it is no auth-no priv.
no snmp-server user initial
no snmp-server group initial

Re: SNMPv3 - VOSS - Solarwinds

bfaltys — Thu, 16 Sep 2021 19:47:12 GMT

Hi Todd. Yes, I am setting the auth/priv passwords. Here are the actual commands I used on my last test. Don’t mind the weak passwords as they are simply for testing this. Do you know which flavor of AES this is? Solarwinds has 128, 192 and 256 as options.

snmp-server contact "NETWORK SERVICES"
snmp-server location "TEST LAB"
snmp-server view NET-VIEW 1
snmp-server group NET-GROUP "" auth-no-priv read-view NET-VIEW notify-view NET-VIEW
snmp-server user NET-USER md5 PA$$word aes P@$$w0rd
snmp-server user NET-USER group NET-GROUP
snmp-server host 192.168.1.67 v3 authNoPriv NET-USER

That was my most recent test. I intend on using SHA/AES authPriv, but figured I’d try some different configs to see if I can get it to work.

Re: SNMPv3 - VOSS - Solarwinds

bfaltys — Thu, 16 Sep 2021 20:38:15 GMT

Another issue is that I can’t seem to delete any “snmp-server host” entries. I get an error “Error: Target address does not exist.” but when I show my running config it is there.

**This is figured out. This is the wrong command:

no snmp-server host <IP> v3 authNoPriv

This worked:

no snmp-server host <IP> v3 <USER>

Re: SNMPv3 - VOSS - Solarwinds

bfaltys — Thu, 16 Sep 2021 21:29:19 GMT

Ok, I have sorted this out. I enter variables such as usernames, vlan names, port descriptions, etc in caps. On the Solarwinds side I was not. The proper username along with SHA1/AES128 was the winning combination.