getLpidFromPort conversion!! error on VSP 8600 after configuring VRF IPVPN on adjecent VSP

schuert — Mon, 19 Jul 2021 20:52:01 GMT

Hi Guys!

After configuring some subnets and IPVPN on the VRF of an adjacent vsp7200 the connected vsp 8600 logs the following error every few minutes:

1 2021-07-19T15:26:37.190+02:00 herz CP1 - 0x000005e8 - 00000000 GlobalRouter SW ERROR Invalid tPORT: 120 for getLpidFromPort conversion!!

1 2021-07-19T15:26:07.927+02:00 herz CP1 - 0x000005e8 - 00000000 GlobalRouter SW ERROR Invalid tPORT: 86 for getLpidFromPort conversion!!

1 2021-07-19T15:25:56.043+02:00 herz CP1 - 0x000005e8 - 00000000 GlobalRouter SW ERROR Invalid tPORT: 120 for getLpidFromPort conversion!!

I have found some bugreports mentioning that error:

https://downloads.avaya.com/css/P8/documents/100169557 Page 6

https://extremeportal.force.com/ExtrArticleDetail?an=000061394

https://downloads.avaya.com/css/P8/documents/101041874 Page 38

Both mentioning that this is only a cosmetic error. Im using 6.3.8 at the moment, the third link says that error should be fixed since version 6.1.

Do i need to worry about that? Is there a way to avoid this? 2 Identically configured 8600 connected to another location don’t show the same error/behavior.

Re: getLpidFromPort conversion!! error on VSP 8600 after configuring VRF IPVPN on adjecent VSP

Roger_Lapuh — Wed, 21 Jul 2021 20:13:09 GMT

Hi Shuert

no you don’t have to worry, this is a non impacting issue. VOSS 8.1.6avoids this and on the VSP8600 side it is planned to be fixed in 8.0.3.

Roger

topic getLpidFromPort conversion!! error on VSP 8600 after configuring VRF IPVPN on adjecent VSP in ExtremeSwitching (VSP/Fabric Engine)

getLpidFromPort conversion!! error on VSP 8600 after configuring VRF IPVPN on adjecent VSP

Re: getLpidFromPort conversion!! error on VSP 8600 after configuring VRF IPVPN on adjecent VSP