DvR with ACLs

Jay2009 — Fri, 27 Nov 2020 01:15:52 GMT

Hello,

I am assuming that any ACLs I put on a controller I would have to do the same for all leaf nodes? Is their a way to push the ACLs to the leaf nodes from the controller like it does DvR routes? Do you just use XMC and paste the config into all lead nodes?

Re: DvR with ACLs

SamPirok — Thu, 03 Dec 2020 02:12:32 GMT

Hi Jay, sorry for the long wait here, thank you for your patience while I was looking in to this for you.

There is a configuration push from the controller to the leaf nodes in regards to which L2VSN’s are part of DVR, and which are not, the DVR routes themselves, indexed on a per VRF basis, and the default route, again on a per VRF basis. Also pushed to the leaf nodes is configuration data in regards to multicast.

ACLs being pushed to the DVR leaf nodes is in the roadmap, but unfortunately I don’t have an ETA I can share today. I hope that helps, please let me know if I can clarify anything.

topic Re: DvR with ACLs in ExtremeSwitching (VSP/Fabric Engine)

DvR with ACLs

Re: DvR with ACLs