topic Re: VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x in ExtremeSwitching (VSP/Fabric Engine)

VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x

Yann_A — Fri, 26 Mar 2021 17:30:49 GMT

I try to update my VOSS release to 8.1.x to 8.2.x or 8.3.x on my VSP 4450, but when I want to connect with web server, not possible, SSH down too.

Have you any idea ?

Re: VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x

Miguel-Angel_RO — Fri, 26 Mar 2021 17:32:48 GMT

Yann,

Can you double check that you point to the management IP?

This has been changed in 8.2

the command so see it is “show mgmt ip”.

Mig

Re: VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x

Roger_Lapuh — Fri, 26 Mar 2021 18:12:21 GMT

Hi Yann.A

as Miguel says, we have changed the way VSPs are managed starting with Release 8.2, we call this the Segmented Management Stack. Before 8.2 a switch could be managed through any IP interface on the switch as long as the IP interface was part of the GRT (VRF0). Starting with 8.2, there are only 3 IP addresses that can be used for managing the platform:

out of band
management VLAN
management CLIP (Loopback)

So before you migrate to 8.2 you should make sure you define what you want to use as your management IP address and use the “migrate-to-mgmt” command. When you do this, after the reboot with 8.2 the CLIP or VLAN IP address will be available for management.

Maybe you forgot to execute the command beforehand? If so, then use the new managment commands to configure the new segmented management IP addresses.

I hope this helps.

Roger

Re: VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x

JustasK — Tue, 30 Mar 2021 20:03:47 GMT

HI

Please look here

https://extremeportal.force.com/ExtrArticleDetail?an=000079664&q=vsp%20management%20access

topic Re: VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x in ExtremeSwitching (VSP/Fabric Engine)

VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x

Re: VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x

Re: VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x

Re: VSP 4450 Web Server : not work on VOSS4400.8.2.X or VOSS4400.8.3.x

Cannot access SSH/Telnet/EDM due to Segmented Management introduced in VOSS 8.2