Configuration of Multiple BGP links on a single port interface to seperate Jisc locations

RodR — Wed, 25 May 2022 14:17:27 GMT

Hi

I have a requirement to change the current bgp Jisc ( janet connections ) from a single link and single neighbour, with all the policy entries to support this.

I now have a requirement to actuall add another vlan on the same interface to jisc , where the remote neighbour is at another location.

So the basic network configuration is very normal ..

What I do not understand is do I modify the existing policy files , for example

conf bgp neighbor 10.101.10.101 route-policy in BGP_IN_FROM_JANET

or do I need to create a new policy for the new link as it has a different neighbor though the same AS number

The same discussion re bgp export ospf-internal1 xxx export_policy_from_ospf , do I need a rule per link ?

I look forward to your comments

topic Configuration of Multiple BGP links on a single port interface to seperate Jisc locations in ExtremeSwitching (VSP/Fabric Engine)

Configuration of Multiple BGP links on a single port interface to seperate Jisc locations