topic Re: mgmt clip IP not accessible in ExtremeSwitching (VSP/Fabric Engine)

mgmt clip IP not accessible

gaurav-pandya — Mon, 12 Feb 2024 10:35:55 GMT

Hello,

We are using 5520 switch running voss. It is acting as L2 switch and connected to firewalls. There are couple of L2 vlans configured on it. To manage those switches, I have configured mgmt CLIP IP. But CLIP IP is not accessible from network.

Do I need to put default route on the switch to get it working? How I can manage those switches?

Re: mgmt clip IP not accessible

EXTR_Paul — Mon, 12 Feb 2024 13:35:33 GMT

If the switch is not a L3 device then the CLIP address will not be reachable.

you will need to configure a VLAN Mgmt Address.

here is an example

mgmt vlan 192

ip address 192.168.2.43/24. / just an example

ip route 0.0.0.0/0 next-hop 192.168.2.1 weight 10

enable

Re: mgmt clip IP not accessible

Ludovico_Steven — Mon, 12 Feb 2024 13:41:02 GMT

If you configured a mgmt CLIP, maybe you forgot to add this config line ?:

router isis spbm 1 ip enable exit

Re: mgmt clip IP not accessible

EF — Wed, 28 Feb 2024 20:30:58 GMT

Hi,

Besides Ludovico says, maybe you need additional VLAN between your CORE and FW to route the CLIP network because I belive you are behind the FW.

You can configure this VLAN without mgmt rol, and then:

- FROM CORE ,default route to FW´s IP
- FROM FW, statics routes to CLIPs trought CORE´s VLAN IP

It works for me.

Regards

Re: mgmt clip IP not accessible

gaurav-pandya — Fri, 08 Mar 2024 08:24:53 GMT

Hi,

Routing is already in place. My colleague visit site today and give me console of switch. First, I will try command "spbm 1 ip enable"