topic RE: VSP 8400 - Stuck on Status amber blinking - No output on console in ExtremeSwitching (VSP/Fabric Engine)

VSP 8400 - Stuck on Status amber blinking - No output on console

Eric_Smith23 — Sun, 03 Feb 2019 15:00:00 GMT

We have factory default our CoreSwitch2 - VSP 8400, after the factory default no cli output on screen and stuck on Status=Amber blinking. Anyone could help our issue. Thank you.

RE: VSP 8400 - Stuck on Status amber blinking - No output on console

Dilraj_Singh_Kh — Mon, 04 Feb 2019 22:14:00 GMT

Hi Eric,

First question would be: What was the reason for Factory Defaulting the box ?
Second Question: Was it working fine before factory defaulting it?

Regards,
DILRAJ

RE: VSP 8400 - Stuck on Status amber blinking - No output on console

Martin_Sebek — Mon, 04 Feb 2019 23:15:00 GMT

What console setting are you using? The default baud rate for VSP 8400 is 9600. It your console is working with other switches but not this one, I am afraid it is broken and you have to RMA it.

RE: VSP 8400 - Stuck on Status amber blinking - No output on console

Andy — Wed, 06 Feb 2019 19:36:00 GMT

If you are able to see CLI outputs on switch bootup process then it might be possible to recover without RMA. If not then replacement is needed.

RE: VSP 8400 - Stuck on Status amber blinking - No output on console

Lopp — Tue, 12 Feb 2019 16:50:00 GMT

Same on my problem, may I know what is the possible causes of this issue. can you explain? thank you