https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/monitor-voss-fabric-engine-transceivers/m-p/117849#M2859 <P>I found the following OIDs</P><P>SNMP: etsysEntitySfpSensorState<BR />1.3.6.1.4.1.5624.1.2.85.1.2.1.1.1<BR />not found</P><P>SNMP: entPhySensorEntry<BR />1.3.6.1.2.1.99.1.1.1<BR />not found</P><P>RESTCONF Authentication: "You can only use a CLI account with the RWA access level."</P><P>Is there a simple solution for (read-only) monitoring of e.g. transceiver power?</P><P>Best would of course be if XIQ-SE provided this out-of-the box incl. alerting etc. (which is what you'd expect from a professional product...)</P> Wed, 12 Feb 2025 16:41:21 GMT jeronimo 2025-02-12T16:41:21Z https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/monitor-voss-fabric-engine-transceivers/m-p/117849#M2859 <P>I found the following OIDs</P><P>SNMP: etsysEntitySfpSensorState<BR />1.3.6.1.4.1.5624.1.2.85.1.2.1.1.1<BR />not found</P><P>SNMP: entPhySensorEntry<BR />1.3.6.1.2.1.99.1.1.1<BR />not found</P><P>RESTCONF Authentication: "You can only use a CLI account with the RWA access level."</P><P>Is there a simple solution for (read-only) monitoring of e.g. transceiver power?</P><P>Best would of course be if XIQ-SE provided this out-of-the box incl. alerting etc. (which is what you'd expect from a professional product...)</P> Wed, 12 Feb 2025 16:41:21 GMT https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/monitor-voss-fabric-engine-transceivers/m-p/117849#M2859 jeronimo 2025-02-12T16:41:21Z