topic Re: ExtremeControl - Assign Vlan based on VLAN Name to VOSS port in ExtremeSwitching (VSP/Fabric Engine)

ExtremeControl - Assign Vlan based on VLAN Name to VOSS port

Carlosmfg — Tue, 15 Apr 2025 15:31:03 GMT

Hello,

need to assign a vlan based on the name of a existing vlan on a VOSS/FabricEngine switch to a client. What are the correct VSA?

Re: ExtremeControl - Assign Vlan based on VLAN Name to VOSS port

Harry39Haywood — Tue, 22 Apr 2025 04:50:57 GMT

Hello!

To assign a VLAN by name on a VOSS/FabricEngine switch via RADIUS, you primarily need the VLAN ID, not the name. Use the standard RADIUS attributes Tunnel-Type=VLAN, Tunnel-Medium-Type=IEEE-802, and Tunnel-Private-Group-ID=<VLAN_ID>. First, map the VLAN name to its corresponding VLAN ID on the switch and configure your RADIUS server Toll By Plate with this ID. For Fabric Attach scenarios, the FA-VLAN-ISID VSA might be relevant using the I-SID associated with the VLAN. The standard approach relies on VLAN IDs in the RADIUS configuration.

Re: ExtremeControl - Assign Vlan based on VLAN Name to VOSS port

Carlosmfg — Mon, 21 Apr 2025 12:59:01 GMT

Hello! I'm recieving the following output. r

EAP WARNING Ignore the radius vlan attribute on Flex UNI port 1/1 with auto-isid-offset disabled.

Re: ExtremeControl - Assign Vlan based on VLAN Name to VOSS port

WillyHe — Mon, 21 Apr 2025 13:41:35 GMT

Hello,

To my understanding, when vlan id. and name are locally configured on the switch, it is possible to use only the vlan name attribute.

regards

WillyHe