https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/voss-command-history/m-p/8718#M299 With EOS or EXOS if often use "history" command so see which commands are entered in a short summary.<BR /> <BR /> In current VOSS (V6.1.0 or V7.0) is miss that feature.<BR /> <BR /> EXOS Example:<BR /> <BR /> SW-XX.1 # show ports<BR /> SW-XX.2 # history<BR /> 1 show ports<BR /> 2 history<BR /> SW-XX.3 # <BR /> Is there maybe a command available to achieve that ?<BR /> <BR /> Fri, 22 Jun 2018 18:53:00 GMT M_Nees 2018-06-22T18:53:00Z https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/voss-command-history/m-p/8718#M299 With EOS or EXOS if often use "history" command so see which commands are entered in a short summary.<BR /> <BR /> In current VOSS (V6.1.0 or V7.0) is miss that feature.<BR /> <BR /> EXOS Example:<BR /> <BR /> SW-XX.1 # show ports<BR /> SW-XX.2 # history<BR /> 1 show ports<BR /> 2 history<BR /> SW-XX.3 # <BR /> Is there maybe a command available to achieve that ?<BR /> <BR /> Fri, 22 Jun 2018 18:53:00 GMT https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/voss-command-history/m-p/8718#M299 M_Nees 2018-06-22T18:53:00Z https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/voss-command-history/m-p/8719#M300 yes, for VSP use: "show history" to get a list of last commands and then use "!#" to re-run the command.<BR /> Fri, 22 Jun 2018 19:09:00 GMT https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/voss-command-history/m-p/8719#M300 Roger_Lapuh 2018-06-22T19:09:00Z https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/voss-command-history/m-p/8720#M301 OK - Thanks.<BR /> Fri, 22 Jun 2018 19:24:00 GMT https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/voss-command-history/m-p/8720#M301 M_Nees 2018-06-22T19:24:00Z