https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/how-to-convert-two-routed-interfaces-between-two-pair-9k-and/m-p/120075#M3047 <P>We have pairs of N7K and N9k connecting via eigrp (full mesh), each one of the pair connected to two mpls routers, each pair have routing table, I am looking to replace the routed interfaces between pairs of N7K and N9K with vPC, is that possiable ? and how i can do it full mesh also i am not sure how to deal with the routing tables. Also, can you advise me on better practice designs that are attached to the current design?</P><P>&nbsp;</P> Tue, 26 Aug 2025 10:57:26 GMT samikomal 2025-08-26T10:57:26Z https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/how-to-convert-two-routed-interfaces-between-two-pair-9k-and/m-p/120075#M3047 <P>We have pairs of N7K and N9k connecting via eigrp (full mesh), each one of the pair connected to two mpls routers, each pair have routing table, I am looking to replace the routed interfaces between pairs of N7K and N9K with vPC, is that possiable ? and how i can do it full mesh also i am not sure how to deal with the routing tables. Also, can you advise me on better practice designs that are attached to the current design?</P><P>&nbsp;</P> Tue, 26 Aug 2025 10:57:26 GMT https://community.extremenetworks.com/t5/extremeswitching-vsp-fabric/how-to-convert-two-routed-interfaces-between-two-pair-9k-and/m-p/120075#M3047 samikomal 2025-08-26T10:57:26Z