topic How to configure Native VLAN on Extreme X440 switch? in ExtremeSwitching (VSP/Fabric Engine)

How to configure Native VLAN on Extreme X440 switch?

Alok_Shukla — Tue, 26 Dec 2017 12:55:00 GMT

How to configure Native VLAN on Extreme X440 switch?

RE: How to configure Native VLAN on Extreme X440 switch?

Sushruth_Sathya — Tue, 26 Dec 2017 13:03:00 GMT

Hi Alok,

We do not have the concept of a Native VLAN in EXOS. We can however add a VLAN as untagged on a port which will exhibit similar behavior.
https://gtacknowledge.extremenetworks.com/articles/How_To/Understanding-EXOS-VLANS-and-tagged-and-un...
This article explains about how VLAN tagging works in EXOS. I hope this will clear things up for you.

RE: How to configure Native VLAN on Extreme X440 switch?

Alok_Shukla — Tue, 26 Dec 2017 13:15:00 GMT

How do we change native VLAN default to other ?

RE: How to configure Native VLAN on Extreme X440 switch?

Necheporenko__N — Tue, 26 Dec 2017 14:16:00 GMT

Hello Alok,

Firstly you must remove untagged port from vlan "default"

conf vlan Default del port <#_num> And then add that port to required VLAN as untagged

conf vlan add port <#_num> untag Best Regards,
Nikolay