topic Re: poe disable on the 4950 in ExtremeSwitching (VSP/Fabric Engine)

poe disable on the 4950

Thierry — Fri, 12 Jul 2019 21:53:02 GMT

hi

when I run a Power-Cycle test
I have Test 301 POE Contact -
FAILED
POE Bad PSE I2C Adrs [0]: FFFFFFFF FFFFFFFF FFFFFFFF

i have updated the poe / harward / software... nothing works

If you have an idea

best regards

Re: poe disable on the 4950

Dilraj_Singh_Kh — Sat, 13 Jul 2019 10:35:21 GMT

Hi Thierry,

What does output of show poe-pot-status and show run looks like?

Check the below KB article if that helps:

https://gtacknowledge.extremenetworks.com/articles/Solution/000035038

DILRAJ

Re: poe disable on the 4950

Thierry — Mon, 15 Jul 2019 14:21:44 GMT

code:

I already did that, it did not change anything

i think I will send in RMA

Thierry

Re: poe disable on the 4950

Dilraj_Singh_Kh — Tue, 16 Jul 2019 07:11:28 GMT

Yes, Go ahead with RMA