topic Re: VOSS 8.2: Starting pre-installed TPVM console in ExtremeSwitching (VSP/Fabric Engine)

VOSS 8.2: Starting pre-installed TPVM console

M_Nees — Fri, 23 Oct 2020 20:38:47 GMT

i start the pre-installed tpvm system on a VSP7400 (VOSS 8.2).

Accessing to console request a password change …

i do not know the current predefined admin password of this vendor pre-installed vm.

virtual-service tpvm console


===============================================================
Admin Password Configuration
===============================================================
You must change the admin user password.
===============================================================

Changing password for admin.
(current) UNIX password:

passwd: Authentication token manipulation error
passwd: password unchanged

Does anybody knows ? Or how can i end-up this dialog ?

Re: VOSS 8.2: Starting pre-installed TPVM console

MatzeKS — Fri, 23 Oct 2020 20:40:24 GMT

admin / password

Re: VOSS 8.2: Starting pre-installed TPVM console

M_Nees — Fri, 23 Oct 2020 20:42:24 GMT

Thanks.

etype new UNIX password:
passwd: password updated successfully
[  OK  ] Started Admin Password Update Service.
[  OK  ] Reached target Network (Pre).
[  OK  ] Started ifup for eth0.
         Starting Login Service...
         Starting Raise network interfaces...
[  OK  ] Started Login Service.
1 2020-10-23T13:36:03.241Z SW-EAST CP1 - 0x0000c5e7 - 00300001.320 DYNAMIC SET GlobalRouter HW INFO Link Down(1/s1)
1 2020-10-23T13:36:03.662Z SW-EAST CP1 - 0x0000c5ec - 00300001.320 DYNAMIC CLEAR GlobalRouter HW INFO Link Up(1/s1)
[