topic RE: My access point not broadcasting SSID. in ExtremeWireless (IQE)

My access point not broadcasting SSID.

saidaikrishna — Mon, 15 Nov 2021 13:34:00 GMT

My access point not broadcasting SSID. Under the wifi1 interface it shows 0 SSID.

But when logged into CLI and given show ssid it shows all the wireless network.

sh lldp neig

IND(P)-FIN Gi1/0/3 90 B mgt0

show version
--------------------------------------------------------------------------------
Copyright (c) 2006-2020 Extreme Networks, Inc.

Version: HiveOS 10.3r3 build-260166
Build time: Thu May 27 21:27:16 UTC 2021
Build cookie: 2105271427-260166
Platform: AP630
Bootloader ver: v0.0.4.67
TPM ver: v1.2.66.16
Uptime: 0 weeks, 0 days, 0 hours, 11 minutes, 12 seconds
--------------------------------------------------------------------------------
show hw-info
--------------------------------------------------------------------------------
Ethernet MAC address: 3485:841a:9c80
Hardware revision: 01
Product name: AP630
Hardware ID: 0
Manufacturing date: 20190102
Number of MAC addresses: 64
Manufacturing version: 1
Antenna ID: 0
Aerohive hardware key:
HW Auth Device Status: success
TPM Status: success

RE: My access point not broadcasting SSID.

SamPirok — Mon, 15 Nov 2021 18:39:00 GMT

First thing we want to check here is that the device is fully updated, could you push a complete configuration update out to your AP? If the issue persists, it would help to take a look at some tech data for that AP, would you please send me the tech data at community@extremenetworks.com?

RE: My access point not broadcasting SSID.

saidaikrishna — Tue, 16 Nov 2021 14:23:00 GMT

There is some problem with 10.3.1.4 version, after i down graded the AP software to 10.0.1.0 it is started working.

And the access point started broadcasting the ssid-es. It looks the problem is resolved.

Device ID Local Intf Hold-time Capability Port ID
IND(P)- TRIM_BOOTH Gi1/0/5 90 B,W mgt0

Capability changed from B from B,W now.

Also i see users connection now.