https://community.extremenetworks.com/t5/extremewireless-iqe/wi-fi-wpa2-802-1x-external-radius-timeout/m-p/93985#M1244 <P>Hi, we started using Extreme Networks APs AP410C last month, and I found one issue with our external radius.</P><P>There is somewhere limit like 10sec for authentication, in which is nearly impossible to fill username and password. I did not find any setting in the IQ pilot, and this behavior is not when we are using our old Cisco solution.</P><P>When you try to connect, pop-up windows will open, but wifi will be disconnected in 10 sec, and username and password cannot be accepted anymore.</P><P>Is there any setting regarding timeout for WPA2-802.1X ?</P><P>Thanks</P> Thu, 01 Dec 2022 12:18:05 GMT Wenzel 2022-12-01T12:18:05Z https://community.extremenetworks.com/t5/extremewireless-iqe/wi-fi-wpa2-802-1x-external-radius-timeout/m-p/93985#M1244 <P>Hi, we started using Extreme Networks APs AP410C last month, and I found one issue with our external radius.</P><P>There is somewhere limit like 10sec for authentication, in which is nearly impossible to fill username and password. I did not find any setting in the IQ pilot, and this behavior is not when we are using our old Cisco solution.</P><P>When you try to connect, pop-up windows will open, but wifi will be disconnected in 10 sec, and username and password cannot be accepted anymore.</P><P>Is there any setting regarding timeout for WPA2-802.1X ?</P><P>Thanks</P> Thu, 01 Dec 2022 12:18:05 GMT https://community.extremenetworks.com/t5/extremewireless-iqe/wi-fi-wpa2-802-1x-external-radius-timeout/m-p/93985#M1244 Wenzel 2022-12-01T12:18:05Z