Trunk port from Mirktotik

Tony9999 — Wed, 29 Dec 2021 18:47:47 GMT

Dear Team, currently i have a prolems with trunk port on aerohive ap230.
I have the trunk port between my router hap ac2 with ap230 and i think my config from mirkotik is not a prolems (i have attach cable with switch l3 and everything is OK). on device template i change the the port eth1 to trunk but when i tag the vlan on my ssid (ex: ssid name testport). some client can't get the ip and can't connect to the internet, some client get the right ip i have tag but no access internet, and some client get the native vlan ( wrong vlan) and get the internet. so please help.
Thanks

Re: Trunk port from Mirktotik

Sjoerdg — Thu, 30 Dec 2021 21:14:12 GMT

Dear Tony,

Are you trying to create an uplink port or a trunk port? (In Point 2 Point Situations you use a Trunk port Profile for the receiving end) for supplying the AP network access and access to tagged vlans trough the connected cable use Uplink.

is the AP230 directly connected to the AP or is there a Switch in between? can you give us more info about the topology?

Thank you and kind regards,

Sjoerd

topic Re: Trunk port from Mirktotik in ExtremeWireless (IQE)

Trunk port from Mirktotik

Re: Trunk port from Mirktotik