topic Re: how to reset ap to factory configuration if reset buttom failed in ExtremeWireless (IQE)

how to reset ap to factory configuration if reset buttom failed

zlinuxboy — Fri, 12 Mar 2021 13:25:08 GMT

My ap is ap122x, it's weired, the reset buttom failed to reset the ap(I press it for more than 5 second, more than 10 second), the console give out nothing.

is that any possible to reset it under uboot? I could get into uboot.

Re: how to reset ap to factory configuration if reset buttom failed

Christoph_S — Fri, 12 Mar 2021 21:24:41 GMT

Hi,

If you can SSH into the AP, the CLI reset command is:

#reset config

I hope this helps,

Re: how to reset ap to factory configuration if reset buttom failed

zlinuxboy — Fri, 12 Mar 2021 22:35:43 GMT

never mind. latest news, I just found out that it could connect to the xiq, and I change the admin password from the “cli utilities”. I could login with ssh now.

but I couldn’t find any config about

no reset-button reset-config-enable

why the reset button failed to function properly?

Re: how to reset ap to factory configuration if reset buttom failed

dpanev — Fri, 12 Mar 2021 22:38:17 GMT

Cant belive that the reset button fails...press it till the led changes colour

edit:

show reset-button

to see the state of the reset button

Re: how to reset ap to factory configuration if reset buttom failed

Ash_Finch — Fri, 12 Mar 2021 23:28:27 GMT

If you’ve got the reset button disabled in the configuration, then it’s likely it’s been ticked within:

Configuration > Network Policy > Additional settings > management options > Disable Reset Button

I think that’s the only place it could be configured, unless you’ve got supplemental CLI enabled.

Re: how to reset ap to factory configuration if reset buttom failed

Christoph_S — Sat, 13 Mar 2021 01:42:13 GMT

Here’s an article on this for your perusal:

https://extremeportal.force.com/ExtrArticleDetail?an=000093925

Cheers,