topic Re: Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli? in ExtremeWireless (IQE)

Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

zlinuxboy — Mon, 26 Jul 2021 13:46:24 GMT

hi, community.

There are some problem within my wifi environment, I suspect the use are using bt or similar tool to download, occupied the whole Internet outbound.
Do you suggest I implement rate limit per client qos policy?

Re: Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

Christoph_S — Mon, 26 Jul 2021 20:08:00 GMT

Hello

Here’s an article with instructions on how to set up wireless client reports. You have 2 options in there. Check the results templates to see if any will provide you with the information you need.

https://extremeportal.force.com/ExtrArticleDetail?an=000095720

Yes you can set up rate limiting per client if you so wish: https://extremeportal.force.com/ExtrArticleDetail?an=000083895

Thank you,

Re: Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

zlinuxboy — Mon, 26 Jul 2021 21:56:26 GMT

do you have a best practice for rate limit? I got 20-30 client concurrent associated with one ap230, is it a resource drain feature?

Re: Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

zlinuxboy — Mon, 26 Jul 2021 22:41:21 GMT

@Christoph S. sorry, May be I didn’t make it clear enough, what I want is the bandwidth utilization per second, the report you mention is bandwidth usage statistics.

Re: Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

zlinuxboy — Mon, 26 Jul 2021 22:46:27 GMT

And there is a problem, when drill down to a specific client’s page, I select a peroid of time and click the “download” button, but download process didn’t happen.

Re: Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

SamPirok — Tue, 27 Jul 2021 21:50:22 GMT

Can you try the download in a different browser just to make sure it’s not a browser issue? If the second browser has the same issue, you’ll want to open a support ticket so we can dig in to that further with you and likely file a bug report.

Re: Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

Christoph_S — Thu, 29 Jul 2021 03:36:11 GMT

Do these provide you with info you can use?

#show station <wireless-client-macaddress> counter

#show station <wireless-client-macaddress>

Re: Any possible to check the client's bandwidth usage on xiq pilot or aerohive cli?

zlinuxboy — Thu, 29 Jul 2021 15:38:03 GMT

@Christoph S. I try the cli `show station <wireless-client-mac>`, the number is aggregate-value, not the real-time value.