topic RE: tunel entre CWE y AP3610 remoto a través de internet , es posible? in ExtremeWireless (General)

tunel entre CWE y AP3610 remoto a través de internet , es posible?

Martin_Perez — Sat, 27 Feb 2016 07:59:00 GMT

Hola, tengo un proyecto donde se propone tener una CWE en un sitio fijo y tener el control de alrededor de 10 AP en oficinas remotas sin la utilización de hardware VPN, el enlace entre CWE y AP es a través de Internet, es posible esta configuración sin la utilización de VPN?.

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Jeremy_Gibbs — Sat, 27 Feb 2016 09:22:00 GMT

El reenvío de puertos y el establecimiento de un defecto en la configuración estáticaHWC.

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Martin_Perez — Sat, 27 Feb 2016 09:22:00 GMT

Tan yo u, necesito algo de información, alguna alternativa o manual para este tipo de instalación?

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Doug — Mon, 29 Feb 2016 20:19:00 GMT

Reference: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-setup-an-IdentiFi-Wireless-Solution...

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Martin_Perez — Mon, 29 Feb 2016 20:19:00 GMT

T ank you, I need more información about it, can you help me?, or alternative about it, I can read in Thor Link that I should configurate public IP in the controller , where can I get more information about is or configuration guide.

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Jeremy_Gibbs — Mon, 29 Feb 2016 20:19:00 GMT

If the guide doesn't make sense, maybe contact Extreme for professional services or pay a contractor to help out. Setting up an entire wireless controller would be tricky communicating through the hub.

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Jeremy_Gibbs — Mon, 29 Feb 2016 20:19:00 GMT

But... You are going to have to configure your L2 interfaces. Setup an interface with a public IP and allow the appropriate ports to be open. Use the static config option in the AP config to point the AP to the public IP address of the controller. Assuming everything is setup right, the AP will establish it's secure tunnel. It's quite easy to do, however, I am not 100% sure it is the recommended way. Currently, I tunnel everything through an ASA IPSEC tunnel for remote APs.

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Martin_Perez — Mon, 29 Feb 2016 20:19:00 GMT

hello, thank you , I tray mount a laboratory , but this is my problem now.
https://community.extremenetworks.com/extreme/topics/ap-remote-office-offline-in-the-cwe-no-tunel?rf...

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Ronald_Dvorak — Tue, 01 Mar 2016 13:44:00 GMT

Take a look into this post....
https://community.extremenetworks.com/extreme/topics/bridged-ap-connected-client-cannot-obtain-dhcp-...

If that doesn't make sense I'd recommend what Jermey suggested ...
" contact Extreme for professional services or pay a contractor to help out"

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Martin_Perez — Tue, 01 Mar 2016 13:44:00 GMT

thank you, I trayed mount a laboratory and my problem this is now , https://community.extremenetworks.com/extreme/topics/ap-remote-office-offline-in-the-cwe-no-tunel?rf...

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Drew_C — Tue, 01 Mar 2016 22:34:00 GMT

This thread may also be helpful: https://community.extremenetworks.com/extreme/topics/aps-on-wan-side-of-firewall-dont-upgrade

RE: tunel entre CWE y AP3610 remoto a través de internet , es posible?

Martin_Perez — Tue, 01 Mar 2016 22:34:00 GMT

thank you, I trayed mount a laboratory and my problem this is now , https://community.extremenetworks.com/extreme/topics/ap-remote-office-offline-in-the-cwe-no-tunel?rf...